|
| 1 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each, complete all as specified and as directed by Engineer-in-charge. |
| 2 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each, complete all as specified and as directed by Engineer-in-charge. |
| 3 | Taking down Shutters of any description not exc 1 sq. m each, complete all as specified and as directed by Engineer-in-charge. |
| 4 | Taking down Shutters of any description exc 1 sq. m and not exc 2 sq. m each, complete all as specified and as directed by Engineer-in-charge. |
| 5 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge. |
| 6 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or aluminium, glazed with putty or fixed with beads, complete all as specified and as directed by Engineer-in-charge. |
| 7 | M&L for resecuring or easing & adjusting without taking down of aluminium partitions/ door/ windowShutters of any description, including refixing/tightening of hinges, handles, tower bolts and other accessories with and including providing new brass CP screws, aluminium snap beading, rubber gasket, etc. (If required), complete all as specified and as directed by Engineer-in-charge. |
| 8 | M&L for resecuring or easing & adjusting without taking down of wooden door/ window/ ventilator/ cup board Shutters of any description, including refixing/tightening of hinges, handles, tower bolts and other accessories with and including providing new brass CP screws (If required), complete all as specified and as directed by Engineer-in-charge. |
| 9 | M&L for resecuring or easing & adjusting without taking down of mild steel window/ ventilator Shutters of any description, including refixing/tightening of hinges, handles, tower bolts and other accessories with and including necessary welding (If required), complete all as specified and as directed by Engineer-in-charge. (NOTE- New builder hardware as/if required shall be measured and paid under relevent item here-in-after as supply only.) |
| 10 | Supply only MS box type hinges of 50mm long |
| 11 | Supply only MS handle of 100mm long |
| 12 | Supply only MS tower bolt of 75mm long |
| 13 | Supply only MS peg-stay for steel window |
| 14 | S&F in-repair of 25 mm dia mild steel, chromium plated curtain rail with fixing brackets, stops, rollers etc., complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube; complete all as specified and as directed by Engineer-in-charge. |
| 17 | S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement; complete all as specified and as directed by Engineer-in-charge. |
| 18 | S&F of 30mm thick factory made second class hard wood Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides; complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F of 35mm thick factory made second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; complete all as specified and as directed by Engineer-in-charge. |
| 20 | S&F of 35mm thick factory made second class hard wood Glazed and skeleton shutters, divided into squares and prepared to receive glass, gauze, etc. with rebated sash bars,edges of framing plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed by Engineer-in-charge. |
| 21 | S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engineer-in-charge. |
| 22 | M&L for applying silicon sealent on joints of wall, cill, jambs, roofs, etc., complete all as specified and as directed by Engineer-in-charge. |
| 23 | S&F of 100 mm long Butt hinges, medium weight, stainless steel, complete all as specified and as directed by Engineer-in-charge. |
| 24 | S&F in-repair of 100 mm long Butt hinges, medium weight, stainless steel, complete all as specified and as directed by Engineer-in-charge. |
| 25 | S&F of 75 mm long Butt hinges, medium weight, stainless steel, complete all as specified and as directed by Engineer-in-charge. |
| 26 | S&F in-repair of 75 mm long Butt hinges, medium weight, stainless steel, complete all as specified and as directed by Engineer-in-charge. |
| 27 | S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed by Engineer-in-charge. |
| 28 | S&F in-repair of 150 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed by Engineer-in-charge. |
| 29 | S&F of 150 mm long Extruded aluminium alloy handles, febricated type, anodised, complete all as specified and as directed by Engineer-in-charge. |
| 30 | S&F in-repair of 150 mm long Extruded aluminium alloy handles, febricated type, anodised, complete all as specified and as directed by Engineer-in-charge. |
| 31 | S&F of Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engineer-in-charge. |
| 32 | S&F in-repair of Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engineer-in-charge. |
| 33 | S&F of 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed by Engineer-in-charge. |
| 34 | S&F of 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed by Engineer-in-charge. |
| 35 | S&F in-repair of 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed by Engineer-in-charge. |
| 36 | S&F in-repair of aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and as directed by Engineer-in-charge. |
| 37 | S&F in-repair of Mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed by Engineer-in-charge. |
| 38 | S&F in-repair of 140 mm Overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and rubber end, fixed in floor, complete all as specified and as directed by Engineer-in-charge. |
| 39 | S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, including dismantling the existing old damaged steel structure,complete all as specified and as directed by Engineer-in-charge. |
| 40 | M&L for Rendering (Externally) 15mm thick in Cement Mortar 1:4 on other than fair faces of brick work, concrete surfaces, other side of lathing, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed byEngineer-in-charge. |
| 41 | M&L for providing Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., laid over 20mm thick cement screed 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of existing old damaged tiles of any type, complete all as per specified and as directed by Engineer-in-charge. |
| 42 | M&L for providing Vitrified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc., laid over 20mm thick cement screed 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match,including dismantling of existing old damaged tiles of any type, complete all as per specified and as directed by Engineer-in-charge. |
| 43 | M&L for providing Vitrified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm,in vertical surface (like skirting, dado, etc.),over 10mm thick cement screed 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match,including dismantling of existing old damaged tiles of any type, complete all as per specified and as directed by Engineer-in-charge. |
| 44 | M&L for providing Glazed ceramic coloured tiles in vertical surface (like skirting, dado, etc.) 300x 450x 7 mm thick, over 10mm thick cement screed 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match,including dismantling of existing old damaged tiles of any type, complete all as per specified and as directed by Engineer-in-charge. |
| 45 | M&L for 18-20mm thick Granite work (of any type, table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including dismantling of existing old damaged stone slab of any type, complete all as per specified and as directed by Engineer-in-charge. |
| 46 | M&L for preparation of new or previously un-treated steel/iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of black japan paint (1st quality) over a coat ofred oxide primer, complete all as specified and as directed by Engineer-in-charge. |
| 47 | M&L for preparation of new or previously un-treated woodenSurfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of Synthetic enamel paint (1st quality) of any tint over a coat ofpink primer, complete all as specified and as directed by Engineer-in-charge. |
| 48 | M&L for preparing newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed by Engineer-in-charge. |
| 49 | M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint of any shade over a coat of alkali-resistant priming paint, complete all as specified and as directed by Engineer-in-charge. |
| 50 | M&L for preparing old plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion of any shade over a coat of white primer, complete all as specified and as directed by Engineer-in-charge. |
| 51 | M&L for preparing old plastered or unplastered surfaces of wall and applying one coat of distemper oil emulsion of any shade, complete all as specified and as directed by Engineer-in-charge. |
| 52 | M&L for preparing old plastered or unplastered surfaces of wall and applying one coat of white wash, complete all as specified and as directed by Engineer-in-charge. |
| 53 | M&L for preparation of old painted steel/ iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of Synthetic enamel paint (1st quality) of any tint, complete all as specified and as directed by Engineer-in-charge. |
| 54 | M&L for preparation of old painted woodenSurfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of Synthetic enamel paint (1st quality) of any tint, complete all as specified and as directed by Engineer-in-charge. |
| 55 | S&F in-repair of exposed powder coated GI snap grid frame work (600x600 mm) for false ceiling comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with suspended hangers of 2 mm dia. G.I. (upto 1200mm length) adjusting level fixed to any type of roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size with and including fixing/ laying/ inserting of pre-painted (white) 4mm thick designer classic E-boards (595x595 mm) to GI frame work, complete all as specified and as directed by Engineer-in-charge. |
| 56 | S&F of 0.50mm thick Pre-painted galvalume aluminum zinc coating GI based semi-corrugated (trapizoidal profile) steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with and including dismantling old existing sheets of any type and any thickness, complete all as specified and as directed by Engineer-in-charge. |
| 57 | S&F in-repair of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engineer-in-charge. |
| 58 | M&L for repair to toilet/ bathroom/ kitchen sunken floor by dismantling existing floor and laying 3mm thick APP based polymeric membrane, adjusting/ repairing the existing floor trap, grating and making good the disturbed floor as existing,complete all as specified and as directed by Engineer-in-charge. |
| 59 | S&F in-repair of Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white with and including grating, 15mm dia 450mm long PVC connection pipe and 32mm dia 900mm long PVC Flexible waste pipe and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long CP brass screws, pointing around urinal back in putty; complete all as specified and as directed by Engineer-in-charge. |
| 60 | S&F in-repair of Vitreous China wash basin, white, with brackets, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including providing 32mm dia CP Waste fittings, 15mm dia 450mm long PVC connection pipe and 32mm dia 900mm long PVC Flexible waste pipe, complete all as specified and as directed by Engineer-in-charge. |
| 61 | S&F in-repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and as directed by Engineer-in-charge. |
| 62 | S&F in-repair of Wash down water closet (Pedestal pattern) pan and S/P trap of 540x375x415mm with and including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or anodised aluminium hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and as directed by Engineer-in-charge. |
| 63 | S&F in-repair of 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm dia, with and including making necessary connections, complete all as specified and as directed by Engineer-in-charge. |
| 64 | Cleaning of air/ dust blockage from internal water supply (surface/ concealed) pipe line of any type by taking out pipe and pipe fittings (as required) and removing air, scales, dirts, etc. and re-fixing all pipe and fittings as existing to facilitate smooth supply of water, complete all as per specified and as directed by Engineer-in-charge. |
| 65 | S&F in-repair for 32mm dia PVC flexible waste/ discharge pipe, complete all as specified and as directed by Engineer-in-charge. |
| 66 | S&F in-repair of PVC connection pipe 15mm dia with PTMT nuts of length 450mm, complete all as specified and as directed by Engineer-in-charge. |
| 67 | S&F in-repair of 15 mm dia fancy type Brass CP telephonic wall mixer (without hand shower and hose) for mixing hot & cold water, screwed for iron pipe, complete all as specified and as directed by Engineer-in-charge. |
| 68 | S&F in-repair of Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed by Engineer-in-charge. |
| 69 | S&F in-repair of Brass chromium plated towel ring, 20cm dia, fixing to wall with CP brass screws, complete all as specified and as directed by Engineer-in-charge. |
| 70 | S&F in-repair of 15 mm dia fancy type chromium plated Sink cock, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engineer-in-charge. |
| 71 | S&F in-repair of Brass chromium plated shower rose of 125mm dia of rose, fixing to existing pipe or union of 15 mm dia, complete all as specified and as directed by Engineer-in-charge. |
| 72 | S&F in-repair of 15 mm dia fancy type, chromium plated Stop valves/ Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engineer-in-charge. |
| 73 | S&F in-repair of 15 mm dia fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engineer-in-charge. |
| 74 | S&F in-repair of 15mm dia galvanised steel tubes, \"medium grade\", with all fitting; fixed to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge. |
| 75 | All as per Item No. 74 here-in-above, but for 20mm dia GI tubing, complete all as specified and as directed by Engineer-in-charge. |
| 76 | S&F in-repair of 20mm dia (Outer) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge. |
| 77 | All as per Item No. 76 here-in-above, but for 25mm dia GI tubing, complete all as specified and as directed by Engineer-in-charge. |
| 78 | S&F in-repair of Rotational Moulded Polyethylene Water Storage Tank 500 Litre capacity (Cylindrical Vertical with Closed Top), 3 layered, hoisted and fixed in position, all as specified in MES Schedule Part-I with and including providing 20 mm dia float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gm), complete all as specified and as directed by Engineer-in-charge. |
| 79 | All as per Item No. 78 here-in-above, but for 1000 Litre tank, complete all as specified and as directed by Engineer-in-charge. |
| 80 | S&F in-repair of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ fixed to wall/ ceiling, complete all as specified and as directed by Engineer-in-charge. |
| 81 | S&F in-repair of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ fixed to wall/ ceiling, complete all as specified and as directed by Engineer-in-charge. |
| 82 | S&F in-repair of 110mm dia PVC (SWR) bends any radius with access door, complete all as specified and as directed by Engineer-in-charge. |
| 83 | S&F in-repair of 75mm dia PVC (SWR) bends any radius with access door, complete all as specified and as directed by Engineer-in-charge. |
| 84 | S&F in-repair of 125/110mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed by Engineer-in-charge. |
| 85 | S&F of20 mm bore (dia), gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778and including taking out old unserviceable gate valves complete all as specified and as directed by Engineer-in-charge. |
| 86 | S&F in-repair of 32mm dia brass chromium plated Waste coupling suitable for wash basin, sink, etc., complete all as specified and as directed by Engineer-in-charge. |
| 87 | S&F in-repair of Brass chromium plated Toilet paper holder flat recessed type, fixing to wall with CP brass screws, complete all as specified and as directed by Engineer-in-charge. |
| 88 | S&F in-repair of Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or anodised aluminium hinging device, complete all as specified and as directed by Engineer-in-charge. |
| 89 | S&F in-repair of Brass chromium plated Soap Dish of 160x160x90mm in size, fixing to wall with CP brass screws, complete all as specified and as directed by Engineer-in-charge. |
| 90 | S&F in-repair of 15 mm dia fancy type chromium plated Pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engineer-in-charge. |
| 91 | S&F in-repair of 15 mm dia fancy type chromium plated Bib tap with wall flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by Engineer-in-charge. |
| 92 | S&F in-repair of 15 mm dia fancy type chromium plated Bib taps 2-in-1 (2-way), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by Engineer-in-charge. |
| 93 | S&F in-repair of Health faucet ABS Body chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed by Engineer-in-charge. |
| 94 | S&F in-repair of 15 mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), complete all as specified and as directed by Engineer-in-charge. |
| 95 | S&F in-repair of 15 mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), complete all as specified and as directed by Engineer-in-charge. |
| 96 | S&F in-repair of 15 mm dia Push tap of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-47gms), complete all as specified and as directed by Engineer-in-charge. |
| 97 | S&F in-repair of 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms), complete all as specified and as directed by Engineer-in-charge. |
| 98 | S&F in-repair of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms), complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F in-repair of Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms), complete all as specified and as directed by Engineer-in-charge. |
| 100 | S&F in-repair of stainless steel Grating doom of 100/125 mm dia with/ without waste hole,complete all as specified and as directed by Engineer-in-charge. |
| 101 | S&F in-repair of 40mm dia Unplasticised PVC (U-PVC) pipe of pressure rating 10 kg/ cm2fixed to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge. |
| 102 | M&L for petty repair to bib tap/ stop cock/ pillar tap/ angle valve/ wall or basin mixer of any type by changing PVC washer/ sheet washer, spindle or any other minor parts, including taking down and re-fixing in original position, complete all as specified and as directed by Engineer-in-charge. |
| 103 | M&L for petty repair to high or low level flushing cistern by adjusting the float valve, checking of PVC connection, PVC bend including replacing of rubber washer, check-nut, plunger, etc. of any type, complete all as specified and as directed by Engineer-in-charge. |
| 104 | Fixing in original position of disturbed sinks with or without drainage board/ basin of any description for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and as directed by Engineer-in-charge. |
| 105 | S&F in-repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed by Engineer-in-charge. |
| 106 | S&F in-repair of corner Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 15cm wide with chromium plated bracket guard and railing 30cm long, complete all as specified and as directed by Engineer-in-charge. |
| 107 | S&F in-repair of plate rack/ kitchen rack made of stainless steel 1mm thick overall size 900mm x 600mm x 250mm, fixed to wall with CP brass screws, complete all as specified and as directed by Engineer-in-charge. |
| 108 | S&F in-repair of PVC Mirror cabinet with shelf of size 540 x 340 x 130mm with and including CP brass screws, complete all as specified and as directed by Engineer-in-charge. |
| 109 | S&F in-repair of 450x600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by Engineer-in-charge. |
