Tender For Repair/Maintenance And Cleaning Of Water Supply, Sewage Installations And Distribution Including Pipelines, Motor And Pumps Of Stp Etc At Fazilka Mil Station, Abohar-Punjab

TDR : 53086388

Tender Notice
BOQ

17 Days Left

Abohar , Punjab

Tender Brief : Tender For Repair/Maintenance And Cleaning Of Water Supply, Sewage Installations And Distribution Including Pipelines, Motor And Pumps Of Stp Etc At Fazilka Mil Station

Document Fees
₹ 500 /-

EMD
₹ 90000.0 /-

Tender Value
Refer document

Submission Date
12-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits, pipes and cables etc. not exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed by Engineer - in - Charge.
2	Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in - Charge.
3	Returning, filling in, including spreading, levelling, watering and well ramming in layersof soft / loose soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.
4	Dismantling/Taking out CI/DI water mains (including all fittings) with spigot and socket ends and rubber gasket joints 150mm bore completeall as specified and directed by Engineer - in – Charge.
5	Dismantling/Taking outCI/DI water mains (including all fittings) with spigot and socket ends and rubber gasket joints 200mm bore completeall as specified and directed by Engineer - in – Charge.
6	Dismantling/Taking outCI/DI water mains (including all fittings) with spigot and socket ends and rubber gasket joints 250mm bore completeall as specified and directed by Engineer - in – Charge.
7	M & L for cast iron Fittings for spigot and socket /flanged pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipes all as specified and as directed by Engineer-in-Charge.
8	M & L for cast iron Fittings for spigot and socket /flanged pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs for 200mm to 300mm bore pipes all as specified and as directed by Engineer-in-Charge.
9	M & L for DI fittingsfor DI Spigot and socketed/ flanged pipes like bends (any type, radius and angle) straight, taper, bend, increasing, decreasing double socket etc.) tee pieces single branch “Y” junction double branch, cross collars, caps and plugs etc. complete all as specified and directed by Engineer - in - Charge. Note for DI Fittings :-The weight of the fittings for the purpose of payment shall be actual weight of the fittings or as specified in IS code whichever is less.
10	M & L for Burning out lead joint in position, including removing oldlead for 150mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.
11	M & L for Burning out lead joint in position, including removing old lead for 200mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.
12	M & L for run lead joint suitable forCI pipe of 150mm bore spigot and socketed pipes and fittingscomplete all as specified and directed by Engineer-in-Charge.
13	M & L for run lead joint suitable for CI pipe of200mm bore spigot and socketed pipes and fittingscomplete all as specified and as directed by Engineer-in-Charge.
14	M & L for run lead joint suitable for CI pipe of250mm bore spigot and socketed pipes and fittingscomplete all as specified and as directed by Engineer-in-Charge.
15	Dismantling joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, nuts. for 150 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
16	Dismantling joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, nuts. for 200 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
17	Dismantling joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, nuts. for 250 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
18	M&L flanged joint with rubber or fibre board gasket for 150 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
19	M&L flanged joint with rubber or fibre board gasket for 200 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
20	M&L flanged joint with rubber or fibre board gasketfor 250 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
21	M & L for tighten Joint with rubber or fibre board gasket for 150 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
22	M & L for tighten Joint with rubber or fibre board gasket 200 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
23	M & L for tighten Joint with rubber or fibre board gasket for 250 mm Bore of pipes complete all as specified and directed by Engineer-in-Charge.
24	M&L for cutting of existing road of width not exceeding .750 and n.exc 1.0 deep for laying of water mains and fitting back with excavated soil except road portion shall be made good with cement concrete 1:2:4 typeB1 using 20 mm graded stone aggregate complete all as specified and directed by Engineer - in - Charge.
25	M & L for servicing of sluice valve cast iron body by greasing /oiling using necessary tools and plants as required as per manufacturer instructions and proving gland rope of superior quality and rubber gasket/ packing where necessary to stop any leakage of sluice valve of size 80 mm dia to 250 mm dia complete all as specified and directed by Engineer - in - Charge.
26	M&L for repair of leakage/blockage of water supply distribution lines 20 mmdia GI tubing by carryout necessary excavation in any type of soil, returning filling , removing, de watering as required, tightening of loose joints including, fixing of minor items i;e union sockets,nipple, elbow etcas required, threading jointing complete all as specified and directed by Engineer - in - Charge. Note : Earth work will be measured & paid seperately.
27	All as per srl item no 26 above but for GI tubing of size 40mm to 50 mm complete all as specified and directed by Engineer-in-Charge.
28	All as per srl item no 26 above but for GI tubing of size 80 mm complete all as specified and directed by Engineer-in-Charge.
29	S & F in repair brass check nuts as per existing size including opening bend portion of valve and refixing the same suitable for CI sluice valve of the 150/200 mm sizes complete all as specified and directed by Engineer-in-Charge.
30	Supply and fixing in replacement sluice valve flanged type ISI marked (IS - 14846) heavy duty, Class PN 1.6 size 80mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage completeall as specified and directed by Engineer – in – Charge. Make - L&T, Venus, Leader.
31	Supply and fixing in replacement sluice valve flanged type ISI marked (IS - 14846) heavy duty, Class PN 1.6 size 100mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage completeall as specified and directed by Engineer – in – Charge. Make - L&T, Venus, Leader.
32	Supply and fixingin replacement sluice valve flanged type ISI marked (IS - 14846) heavy duty,Class PN 1.6 size 150mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage completeall as specified and directed by Engineer – in – Charge. Make - L&T, Venus, Leader.
33	Supply and fixing in replacement sluice valve flanged type ISI marked (IS - 14846) heavy duty, Class PN 1.6 size 200mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage completeall as specified and directed by Engineer – in – Charge. Make - L&T, Venus, Leader.
34	Supply and fixing in replacement sluice valve flanged type ISI marked (IS - 14846) heavy duty, Class PN 1.6 size 250mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage completeall as specified and directed by Engineer – in – Charge. Make - L&T, Venus, Leader.
35	Supply & Fixing of\"D\" Joint with nut and bolt suitable for 80/100 mm bore DI/CI pipes and fittings including excavation & refilling of earth work and complete all as specified and as directed by Engineer-in-Charge.
36	Supply & Fixing of \"D\" Joint with nut and bolt suitable for 150/200 mm bore DI/CIpipes and fittings including excavation & refilling of earth work complete all as specified and as directed by Engineer-in-Charge.
37	Supply & Fixing of\"D\" Joint with nut and bolt suitable for 250mm bore DI/CI pipes and fittings including excavation & refilling of earth work complete all as specified and as directed by Engineer-in-Charge.
38	S & Fin replacement of 20mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .
39	S & Fin replacement of 25mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .
40	S & Fin replacement of 40mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .
41	S & Fin replacement of 50mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
42	S & Fin replacement of 80mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
43	S & Fin replacement of 100mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
44	S & Fgunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 50mm borecomplete all as specified and directed by Engineer – in – Charge.
45	S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 40mm borecomplete all as specified and directed by Engineer – in – Charge.
46	S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 20/25mm borecomplete all as specified and directed by Engineer – in – Charge.
47	Supply and fixing in replacement of reflux (Non -return) valve flanged type rating PN 1.6 size 80mm bore with necessary gasket, nuts, bolts and washers etc. and jointingincludingtesting for leakage complete all as specified and directed by Engineer – in – Charge.
48	Supply and fixing in replacement of reflux (Non -return) valve flanged type rating PN 1.6 size 100mm borewith necessary gasket, nuts, bolts and washers etc. and jointingincludingtesting for leakage complete all as specified and directed by Engineer – in – Charge.
49	Supply and fixing in replacement of reflux (Non -return) valve flanged type rating PN 1.6 size 150mm bore with necessary gasket, nuts, bolts and washers etc. and jointingincludingtesting for leakage complete all as specified and directed by Engineer – in – Charge.
50	Supply and fixing in replacement of foot valve flanged type of size 80/100 mm borewith necessary gasket, nuts, bolts and washers etc. including testing for leakage completeall as specified and directed by Engineer – in – Charge.
51	S & F in replacement of rubber type flexible couplings suitable for 7.5 to 40 HP motor pump set etc complete all as specified and directed by Engineer-in-charge.
52	M&L cement concrete 1:3:6 type B-1 using 20mm graded stone aggregates on road cutting including necessary form work complete all as specified and directed by Engineer - in - Charge.
53	M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for 80/100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor complete all as specified and directed by Engineer - in - Charge.
54	M&L for disconnecting/dismantling of UNSV 3 phase 415 Volt 50 Hz AC Electric motor5 HP/ 7.5 HP,transportation to Civil workshop andstrip opening of worn out/ defective brunt stator winding, services cleaning of stator slots, bearing bushes etc, varnishing and drying, reassembling, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note - Defect liability for motor and pump shall be one year from the date of Repair.
55	M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal pump of capacity 5 HP/ 7.5 H mono block type, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
56	M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugalelectric motor of capacity 15 HP/ 20 HP mono block type, taking out brunt stator winding, services cleaning of stator slots, bearing bushes etc, varnishing and drying, assembling, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
57	M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal pump of capacity 15 HP/ 20 HPmono block type, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
58	M&L disconnecting/dismantling and strip opening of worn out/defectivesubmersible electric motor15 HP/ 20 HP , taking out brunt stator winding, services, cleaning of stator slots, bearing bushes etc, varnishing and drying, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
59	M&L disconnecting/dismantling and strip opening of worn out/defective submersiblepump 15 HP/ 20 HP, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
60	M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugalelectric motor of capacity 40 HP mono block type, taking out brunt stator winding, services cleaning of stator slots, bearing bushes etc, varnishing and drying, assembling, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
61	M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal pump of capacity 40 HP mono block type, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note - Defect liability for motor and pump shall be one year from the date of Repair.
62	Supply and fixing CI Impellar for centrifugal pumping set of capacity 5/7.5 HP complete all as specified and directed by Engineer - in - Charge.
63	Supply and fixing brass bush for centrifugal pumping set of capacity 5/7.5 HP complete all as specified and directed by Engineer - in - Charge.
64	Supply and fixing stainless steel shaft for centrifugal pumping set of capacity 5/7.5 HP complete all as specified and directed by Engineer - in - Charge.
65	Supply and fixing Ball bearing as per existing size & No. for centrifugal pumping set of capacity 5/7.5 HP complete all as specified and directed by Engineer - in - Charge.
66	Supply and fixing CI impellar for centrifugal pumping set 15/20 HP complete all as specified and directed by Engineer - in - Charge.
67	Supply and fixing brass bush for centrifugal pumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
68	Supply and fixing stainless steel shaft for centrifugal pumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
69	Supply and fixing Ball bearing as per existing size & No. for centrifugal pumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
70	Supply and fixing Gun metal impeller for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
71	Supply and fixing stainless steel shaft for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
72	Supply and fixing thrust rod for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
73	Supply and fixing distance sleave for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
74	Supply and fixing Motor bush for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
75	Supply and fixing sealing kit for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
76	Supply and fixing thrust plate for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
77	Supply and fixing pump coupling stainless with key for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
78	Supply and fixing studs & nuts for submersiblepumping set of capacity 15/20 HP complete all as specified and directed by Engineer - in - Charge.
79	Supply and fixing CI Impeller of centrifugal pumping set of 40HP capacity complete all as specified and directed by Engineer - in - Charge.
80	Supply and fixing brass bush of centrifugal pumping set of 40HP capacity complete all as specified and directed by Engineer - in - Charge.
81	Supply and fixing ball bearing No. 6306 of centrifugal pumping set of 40HP capacity complete all as specified and directed by Engineer - in - Charge.
82	Supply and fixing ball bearing No. 7306 of centrifugal pumping set of 40HP capacity complete all as specified and directed by Engineer - in - Charge.
83	Supply and fixing air blower for compressor and motor set of capacity 20 HP complete all as specified and directed by Engineer - in - Charge.
84	Supply and fixing oil seal for compressor and motor set of capacity 20 HP complete all as specified and directed by Engineer - in - Charge.
85	Supply and fixing stainless steel shaft for compressor and motor set of capacity 20 HP complete all as specified and directed by Engineer - in - Charge.
86	Supply and fixing oil of suitable specification for compressor and motor set of capacity 20 HP complete all as specified and directed by Engineer - in - Charge.
87	Cleaning of clear water underground Sumpof capacity 1,00,000 Gallons manually by traind and skilled manpower of working in under ground sumps/reservior with suitable T&P andsafty equipments, Toolsand safty measures. Draining out the contaminated muddywater from the bottem surfaceof sump and cleaning the side walls with the help ofwire brushincluding removal green fungs leaves and other dustand dirt, scraping of dissolved impurities, removal of surface mud /silt ,cleaningwith waterand draining out complete unwanted meterial obtained from cleaning as well asapply spray of suitable approved disinfactant chemical on inner surface of the sump safe for human being and two coat spray painting with sky colour water proofing paint and two coats samocem on outer surface and writting the date of cleaning with synthetic enamal paint complete all as specified by Engineer-in-Charge.
88	Cleaning of Raw water jack well of capacity 20000Gallons at Filteration plant manually by traind and skilled manpower of working in under ground sump/reservior with suitable T&P and safty equipments, Toolsand safty measures. Draining out the contaminated muddywater from the bottem surfaceof reserviorand cleaning the side walls with the help ofwire brushincluding removal green fungs leavesand other dustand dirt ,scraping of dissolved impurities, removal of surface mud /silt ,cleaningwith waterand draining outcompleteunwanted meterial obtained from cleaning complete all as specified by Engineer-in-Charge.
89	Cleaning of inner surface of over head reservior 50,000 Gallons capacity manually by trained and skilled manpower for working in over head reservoir with suitable T&P and safety equipment, tools and safety measures. Darining out the contaminted muddy water from the bottom surface of the over head reservoir, scraping inner surface with the help or wire brush, incliding removal green fungs leaves and other dust and dirt, of dissolved impurties, removal of surface mud/ silt, cleaning with water and draining out complete unwanted material obtained form cleaning as well as apply spray of suitable approved disinfactant chemical safe for human being on inner surface and complete outer surface structure with and two coats spray painting with water proofing paint on inner wall of the tank,andwriting the date of cleaning with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
90	Cleaning of inner surface of over head reservior 1,00,000 Gallons capacity manually by trained and skilled manpower for working in over head reservoir with suitable T&P and safety equipment, tools and safety measures. Darining out the contaminted muddy water from the bottom surface of the over head reservoir, scraping inner surface with the help or wire brush, incliding removal green fungs leaves and other dust and dirt, of dissolved impurties, removal of surface mud/ silt, cleaning with water and draining out complete unwanted material obtained form cleaning as well as apply spray of suitable approved disinfactant chemical safe for human being on inner surface and complete outer surface structure with two coats spray painting with water proofing paint on inner wall of the tank,andwriting the date of cleaning with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
91	Cleaning the clarifloculator Semi UG sump of diameter; 14.5 meter and depth not exceeding 7.5 meter by removing mud, sediments manually by trained and skilled manpower who working in UG sumps/ reservoir with safety messures, including scraping the inner surface by wire brush, brooms and removing the mud, green fungs, leaves, dust and dirts, draining out complete unwanted materials obtainedfrom cleanning and two coats spray painting with sky colour water proofing paint on Inner surface of wall and two coats samocem on outer surface and writting the date of cleaning with synthetic enamel paint complete all as specified by Engineer-in-Charge.complete all as specified and directed.
92	Dewatering the stagnated polluted water from 30 lakh gallons capacity raw water tank of size 140 m x 140 m x 4.5 mtr( Note depth not more than 4.5 meter) by pumping out using diesel engine operating pumping set or electricity operated pumping set and draining out the polluted water liquid mud water to distance not exc 100 mtr away from the edge of the tank complete all as specified and directed by Engr-in-charge. Note:- Dewatering shall be carried out by pumping system using diesel operated engine pumping set or electrically operated pumping set at the discretion of the contractor . In case the pumping is done by using electrically operated pumping set then electricity shall be supplied by the MES and shall be charged at rates indicated in Special Condition No. 21. Approx qty of dewatering is 4000 Cum.
93	Desilting of Raw Water tank manually including bailing out mud/sludge by pumps/ manually without damaging bottom lining of tank complete all as specified and directed by Engineer - in - Charge. Note :- Only Manual bailing out is allowed. Motorized equipment or vehicle is not allowed into raw water tank for desilting, contractor should qoute rates accordingly. Approx quantity of Silt/sludge is 1800 Cum.
94	M&L for cleaning/removal of algee, Green vegetation and other trash accumulated on Raw Water storage tank of 30 LGN capacity by means of labour , boat and all other necceessary instruments required for cleaning and waste material through away distance not exeding 50 meter form the storage tank complete all as specified and directed by Engineer - in - Charge.
95	Taking down cement plaster from brick/ concrete walls incl raking out joints , hacking for key scrubbing down with water etc. complete all as specified and directed by Engineer - in - Charge.
96	Rendering 15 mm thick in CM(1:4) on fairor other than fair faces of brick concrete walls, surface finished even and smooth w/o using extra cement complete all as specified and directed by Engineer - in - Charge.
97	Demolition of brick work any description built in cement mortaror cement lime mortar complete all as specified and directed by Engineer - in - Charge.
98	M & L brick work in cement mortar (1:6) all as specified using sub class \" B\"old size brick straight or curved on plan exc 6 m means radius complete all as specified anddirected by Engr-in-charge.
99	Dewatering the stagnated polluted water from 50 lakh gallons capacity raw water tank of size 140 m x 140 m x 4.5 mt r( Note depth not more than 4.5 meter) by pumping out using diesel engine operating pumping set or electricity operated pumping set and draining out the polluted water liquid mud water to distance not exc 100 mtr away from the edge of the tank complete all as specified and directed by Engr-in-charge. Note:- Dewatering shall be carried out by pumping system using diesel operated engine pumping set or electrically operated pumping set at the discretion of the contractor . In case the pumping is done by using electrically operated pumping set then electricity shall be supplied by the MES and shall be charged at rates indicated in Special Condition No. 21. Approx qty of dewatering is 6000 Cum.
100	Desilting of Raw Water tank manually including bailing out mud/sludge by pumps/ manually without damaging bottom lining of tank complete all as specified and directed by Engineer - in - Charge.Note :- Only Manual bailing out is allowed, Motorized equipment or vehicle is not allowed into raw water tank for desilting, contractor should qoute rates accordingly. Approx qty of silt/sludge is 3200 Cum.
101	M&L for cleaning/removal of algee, Green vegetation and other trash accumulated on Raw Water storage tank of 50 LGN capacity by means of labour , boat and all other necceessary instruments required for cleaning and waste material through away distance not exeding 50 meter form the storage tank complete all as specified and directed by Engineer - in - Charge.
102	Cleaning of bushes and grass, cutting the branches of trees if any over ramps and tappered surfaces of raw water /Over Head tanks and making good surfaces as existing all as specified and directed by Engr-in charge
103	Testing of water with collecting samples of desired places for every 30 days and producing the samples at govt testing labs by chemical & biological methodsand collecting the reports of the same all as directed by Engr-in-charge.
104	M&L for removing Beehives of any nos, size and at upto height of 22 mtrs with all safety gear while removing hives with precautions at height andladders required for climbing will carry, all as directed by engr-incharge.
105	M& L for installing and commissioning of MPCB (Motor protection circuit breaker ) of capacity 25 -40 Amps suitable for DIN channel and base mounting both complete all as specified and directed by Engineer - in - Charge.
106	M& L for installing and commissioning of MPCB (Motor protection circuit breaker ) of capacity 20-25 Amps suitable for DIN channel and base mounting both complete all as specified and directed by Engineer - in - Charge.
107	M& L for installing and commissioning of MPCB (Motor protection circuit breaker ) of capacity 10-20 Amps suitable for DIN channel and base mounting both complete all as specified and directed by Engineer - in - Charge.
108	M& L for installing and commissioning of VFDdevice with replacement of existing starter of motor capacity40 HP suitable for DIN channel and base mounting both complete all as specified and directed by Engineer - in - Charge.
109	M& L for installing and commissioning of VFDdevice with replacement of existing starter of motor capacity15 HP suitable for DIN channel and base mounting both complete all as specified and directed by Engineer - in - Charge.
110	M& L for installing and commissioning of VFDdevice with replacement of existing starter of motor capacity5 HP suitable for DIN channel and base mounting both complete all as specified and directed by Engineer - in - Charge.
111	M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 7.5 HP,transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc., varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge.
112	M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 10HP,transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc., varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge.
113	M&L for disconnecting/dismantlingand taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 15HP,transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc., varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge.
114	Supply & fixing sewage submersible non clog motor & pump set of capacity 7.5 HP rated RPM of 1440 consists of max solid size of 45, discharge rate/ head of 14 mtrs of voltage rate 380 to 440 volts (three Phase) , max density of <1050 kg/m cub, IP 68 rated with ambient temp of 40 degree centigrade with \"B\"/\"E\" class,complete body and impeller casing of cast iron and pump shaft of carbon steel complete all as specified and directed by Engineer - in - Charge.
115	Supply and fixing oil seal suitable for5 HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
116	Supply and fixing oil seal suitable for7.5HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
117	Supply and fixing oil seal suitable for10HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
118	Supply and fixing oil seal suitable for12.5HP Non Clog Sewage Submersible Motor all as specified and directed by Engineer in charge.
119	Supply and fixing oil seal suitable for15HP Non Clog Sewage Submersible Motor complete all as specified and directed by Engineer in charge.
120	M&L disconnecting/dismantling and taking out unsvnon clog sewage submersiblepump 5 HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Spare parts will be measured seperately)
121	Supply only CI Impellar for non clog sewage submersiblepump 5 HP complete all as specified and directed by Engineer in charge.
122	Supply only Brash Bush for non clog sewage submersiblepump 5 HP complete all as specified and directed by Engineer in charge.
123	Supply only Stainless steel shaft for non clog sewage submersiblepump 5 HP complete all as specified and directed by Engineer in charge.
124	M&L disconnecting/dismantling and taking out unsvnon clog sewage submersiblepump 7.5 HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Spare parts will be measured seperately.
125	Supply only CI Impellar for non clog sewage submersiblepump 7.5 HP complete all as specified and directed by Engineer in charge.
126	Supply only Brash Bush for non clog sewage submersiblepump 7.5 HP complete all as specified and directed by Engineer in charge.
127	Supply only Stainless steel shaft for non clog sewage submersiblepump 7.5 HP complete all as specified and directed by Engineer in charge.
128	M&L disconnecting/dismantling and taking out unsvnon clog sewage submersiblepump 10HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Spare parts will be measured seperately.
129	Supply only CI Impellar for non clog sewage submersiblepump 10 HP complete all as specified and directed by Engineer in charge.
130	Supply only Brash Bush for non clog sewage submersiblepump 10 HP complete all as specified and directed by Engineer in charge.
131	Supply only Stainless steel shaft for non clog sewage submersiblepump 10 HP complete all as specified and directed by Engineer in charge.
132	M&L disconnecting/dismantling and taking out unsvnon clog sewage submersiblepump 12HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Spare parts will be measured seperately.
133	Supply only CI Impellar for non clog sewage submersiblepump 12 HP complete all as specified and directed by Engineer in charge.
134	Supply only Brash Bush for non clog sewage submersiblepump 10 HP complete all as specified and directed by Engineer in charge.
135	Supply only Stainless steel shaft for non clog sewage submersiblepump 10 HP complete all as specified and directed by Engineer in charge.
136	M&L disconnecting/dismantling and taking out unsvnon clog sewage submersiblepump 15HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Spare parts will be measured seperately.
137	Supply only CI Impellar for non clog sewage submersiblepump 15 HP complete all as specified and directed by Engineer in charge.
138	Supply only Brash Bush for non clog sewage submersiblepump 15 HP complete all as specified and directed by Engineer in charge.
139	Supply only Stainless steel shaft for non clog sewage submersiblepump 15 HP complete all as specified and directed by Engineer in charge.
140	M&L disconnecting/dismantlingand taking out unsvnon clog sewage centrifugal pump 7.5HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Spare parts will be measured seperately.
141	Supply only Gun metal Impeller for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
142	Supply only Stainless steel shaft for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
143	Supply only Thrust rod for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
144	Supply only Distance sleave for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
145	Supply only Motor Bush for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
146	Supply only Sealing kit for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
147	Supply only Thrust plate for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
148	Supply only Pump coupling stainless with key for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
149	Supply only Studs & Nuts for non clog sewage centrifugal pump 7.5 HP complete all as specified and directed by Engineer in charge.
150	M&L disconnecting/dismantling and taking out unsvnon clog sewagecentrifugal pump 10HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Unserviceable spare parts will be measured seperately.
151	Supply only Gun metal Impeller for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
152	Supply only Stainless steel shaft for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
153	Supply only Thrust rod for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
154	Supply only Distance sleave for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
155	Supply only Motor Bush for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
156	Supply only Sealing kit for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
157	Supply only Thrust plate for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
158	Supply only Pump coupling stainless with key for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
159	Supply only Studs & Nuts for non clog sewage centrifugal pump 10 HP complete all as specified and directed by Engineer in charge.
160	M&L disconnecting/dismantling and taking out unsvnon clog sewagecentrifugal pump 12.5 HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Unserviceable spare parts will be measured seperately.
161	Supply only Gun metal Impeller for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
162	Supply only Stainless steel shaft for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
163	Supply only Thrust rod for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
164	Supply only Distance sleave for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
165	Supply only Motor Bush for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
166	Supply only Sealing kit for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
167	Supply only Thrust plate for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
168	Supply only Pump coupling stainless with key for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
169	Supply only Studs & Nuts for non clog sewage centrifugal pump 12.5 HP complete all as specified and directed by Engineer in charge.
170	M&L disconnecting/dismantling of unsvnon clog sewagecentrifugal pump 20HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note:- Unserviceable spare parts will be measured seperately.
171	Supply only Gun metal Impeller for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
172	Supply only Stainless steel shaft for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
173	Supply only Thrust rod for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
174	Supply only Distance sleave for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
175	Supply only Motor Bush for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
176	Supply only Sealing kit for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
177	Supply only Thrust plate for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
178	Supply only Pump coupling stainless with key for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
179	Supply only Studs & Nuts for non clog sewage centrifugal pump 20 HP complete all as specified and directed by Engineer in charge.
180	M&L disconnecting/dismantling of unsvnon clog sewagecentrifugal pump 25HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.Note:- Unserviceable spare parts will be measured seperately.
181	Supply only Gun metal Impeller for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
182	Supply only Stainless steel shaft for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
183	Supply only Thrust rod for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
184	Supply only Distance sleave for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
185	Supply only Motor Bush for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
186	Supply only Sealing kit for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
187	Supply only Thrust plate for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
188	Supply only Pump coupling stainless with key for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
189	Supply only Studs & Nuts for non clog sewage centrifugal pump 25 HP complete all as specified and directed by Engineer in charge.
190	M&L disconnecting/dismantling of unsvnon clog sewagecentrifugal pump 40HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Note:- Spare parts will be measured seperately.
191	Supply only Gun metal Impeller for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
192	Supply only Stainless steel shaft for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
193	Supply only Thrust rod for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
194	Supply only Distance sleave for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
195	Supply only Motor Bush for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
196	Supply only Sealing kit for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
197	Supply only Thrust plate for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
198	Supply only Pump coupling stainless with key for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
199	Supply only Studs & Nuts for non clog sewage centrifugal pump 40 HP complete all as specified and directed by Engineer in charge.
200	S&F in replacement oil immersed fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal enclosersuitable for 40HP motor & relay rangeas recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
201	S&F in replacement oil immersed fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal enclosersuitable for 20HP motor & relay rangeas recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
202	S&F in replacement oil immersed fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal enclosersuitable for 25HP motor & relay rangeas recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
203	S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal enclosersuitable for 12.5 HP motor & relay rangeas recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
204	S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal enclosersuitable for 15 HP motor & relay rangeas recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge.
205	S&F DOLstarter 3 phase 415 volts, 50 HZ AC suitable for 5 HP motor & relay rangeas recommended by manufacturer.
206	S&F DOLstarter 3 phase 415 volts, 50 HZ AC suitable for 7.5 HP motor & relay rangeas recommended by manufacturer.
207	Supply&fixing electric driven motor nonclog sewage pump sets AC three phase voltage rated 50Hz frequency , electric driven,supplied and installed complete 20HP 1440 RPM coupled set with HSC pump on base frame complete three phase of head 50 mtrs all as specified and directed. Make :- Crompton/Kirloskar/CRI
208	Supply&fixing electric driven motor nonclog sewage pump sets AC three phase voltage rated 50Hz frequency , electric driven,supplied and installed complete 15HP 1440 RPM coupled set with HSC pump on base frame complete three phase of head 50 mtrs all as specified and directed. Make :- Crompton/Kirloskar/CRI
209	Supply&fixing electric driven motor nonclog sewage pump sets AC three phase voltage rated 50Hz frequency , electric driven,supplied and installed complete 10HP 1440 RPM 14mtr head complete three phase of head 50 mtrs all as specified and directed. Make:- Crompton/Kirloskar/CRI
210	Material & labour for preparation of complete surface by scrubbing old paint of pumping set incl electric motor & connected pipes of capacity 40HP and applying two coats of synthetic enamel paint etc complete all as specified and as directed by Engr-in-Charge
211	All as per ser No. 210 abovebut 25 HP pump set complete all as specified and directed by Engineer - in - Charge.
212	All as per ser No. 210 above but 20 HP pump set complete all as specified and directed by Engineer - in - Charge.
213	All as per ser No. 210 above but5 HP pump set complete all as specified and directed by Engineer - in - Charge.
214	All as per ser No. 210 above but7.5 HP pump set complete all as specified and directed by Engineer - in - Charge.
215	Taking up and down CI/DI water mains/sewage pipes(including all fittings) with spigot and socket ends and rubber gasket joints 150mm bore completeall as specified and directed by Engineer - in – Charge.
216	Supply ,laying jointing,commissioning and testing Ductile iron pipe with spigot and socket end centrifugally cast(spun) classK-7of size 150 mm dia conforming to IS-8329-2K in any length laid intrenches suitable for rubber push on tyton joints complete all as specified and directed by Engineer - in - Charge.
217	Taking out sluice valves, refacing, regrinding and refixing for 150mm bore complete all as specified and as directed by Engineer-in-Charge.
218	S&F as in replacement of gland packing of sluice valve for 150mm bore or 8mm complete all as specified and as directed by Engineer-in-Charge.
219	S&F as in replacement of gland packing of sluice valve for 250mm bore or 10mm complete all as specified and as directed by Engineer-in-Charge.
220	S&F as in replacement of gland packing of sluice valve for 100mm bore or 6mm complete all as specified and as directed by Engineer-in-Charge.
221	S & F Sluice valve fixed in repair incl repacking stuffing box of sluice valve spindle incl taking apart and reassembling of 150 mm bore all as specified and directed by Engr-in-Charge
222	Labour for taking out UNSV non clog submercible pump set including motor for repairing with the help of suitable T&P and refixing after repairingall as specified and directed by the Engr in charge.
223	Dewatering of sewage water from UG sump with the help of suitable pump for getting out unservicable nonclog submercible pump for repairing all as specified and directed by the Engr in charge.
224	M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 4 core complete all as specified and directed by Engineer - in - Charge.
225	Cleanningthe sewage sump well of 5.65 mtr dia and depth exeeding 5 mtr but not exc 7.5 mtr by removing average 30 cum night soil and sediments including liquid by mean of suitable man power who is regularly dealing the same job with safty equipments, tools and safty measure as well as removing depositing the sludege obtained from cleaning out side the defence land and will be deposited in suitable pit complete all as specified and directed by Engineer - in - Charge.
226	M&L for removing Beehives of any nos, size and at upto height of 22 mtrs at one place with in 15 mtr dia with all safety gear while removing hives with precautions at height andladders required for climbing will carry, complete all as specified and directed by Engineer - in - Charge.
227	M&L DOL starter 15HP capacitycomplete all as specified and directed by Engineer - in - Charge.
228	M&L DOL starter 20HP capacity complete all as specified and directed by Engineer - in - Charge.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Punjab Tenders

Services Tenders

Industrial Cleaning Services Tenders

Desilting Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair/Maintenance And Cleaning Of Water Supply, Sewage Installations And Distribution Including Pipelines, Motor And Pumps Of Stp Etc At Fazilka Mil Station, Abohar-Punjab

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair/Maintenance And Cleaning Of Water Supply, Sewage Installations And Distribution Including Pipelines, Motor And Pumps Of Stp Etc At Fazilka Mil Station, Abohar-Punjab

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us