|
| 1 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 2 | Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 3 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 6 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 8 | Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 9 | Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 10 | Taking up or down Steel Water Tubing 32mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 11 | Taking up or down Steel Water Tubing 40mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 12 | Taking up or down Steel Water Tubing 50mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 13 | M&L Plain Cement Concrete type C-1, (1:3:6) (20mm graded crushed stone aggregate) as in Coping bed plate, for hold fast etc, block benching,channeling slightly rounded, filling in cutting chases or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 14 | M&L Cement Concrete 1:2:4 type B0(12.5 mm graded crushed stone aggregate) as in Holdfast Block including necessary form-work, etc., complete all as specified and as directed. |
| 15 | M&L Cutting Holes in Brick Walls, built in Cement Mortar for Taking Out or Inserting Holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required in exc. Half Brick but not exc. One Brick thick Walls, complete all as specified and as directed. |
| 16 | M&LReinforced cement concrete (Nominal Mix) type A-1 (1:1.5:3) (Using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 17 | Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed. |
| 18 | M&L Brick work usingPulverizes fly ash bricks of class designation 75, straigth or curved on plan exc 6m mean radius built in CM (1:4) cmplete all as specified and directed. |
| 19 | M&L Brick Work with Half Brick work usingPulverizes fly ash bricks of class designation 75, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 20 | Use and waste of Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 21 | Supply and fixing factory made uPVC white colour Two track two panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension uPVC, extruded glazing beads, uPVC extruded interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality and incl steel wire staples 10 mm & thick toughned glass upto 2.1 m tr including necessary fitting and fixturre, uPVC snap beading , complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 22 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality aand including stainless steel wirecloth 0.45 mm nominal dia of wire and average width of apperture 1.4mm and fixed with steel wire staples 5.5 mm thick sheet glass upto 1.5 mtr including necessary fitting and fixture, uPVC snap beading , complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 23 | Supply and fixing factory made UPVC white colour parition with 10mm toughened galss incluidng necessary fitting and fixtures, uPVC snap beading upto 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickess of 2.3+ mm and sigle glazing bead / double glazing bead of appropriate gasket, G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all concers, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note : For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher shall be accepted but not extra payment on this account shal be made. |
| 24 | S&F Powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92mm x 31.75mm x 1.5mm thickness weight of 1.07Kg/m (Section No 20831 of jindal) and f shutter size 40mm x 18mm (with 9.00 mm interlocking legs) x 1.45 mm thickness (section no 20737 of jindal) Section two shutter glazed,covering half of span of opening each & one shutter section covering half of span of opening) including provn for making window air light including 95mm aluminium handle with spring lock, stainless steel wirecloth 0.45 mm nominal dia of wire and average width of apperture 1.4mm and fixed with steel wire staples 5 mm thick plain glasse including necessary fitting and fixturre, aluminium snap beading complete all as specified and directed.Note - Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixture and no cost extra shall be paid separately cost of glass and wire cloth included herein before. |
| 25 | S&FAluminium ventilator with powder coated anodized aluminium frame of sectionsize 65.5 x 38.10 x 1.5 mmand Shutter with section 47.62mm x 44.5mm x 1.5mm thickhalf portion fixed with glass and half portion louvered including powder coated alunimium anodised “D” handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardwarecomplete all as specified & directed. |
| 26 | M&L Powder coated aluminium 50 micron anodised partition consist of single groove rectangular section 101.60 x 44.45 x 1.60mm (Section of jindal wt @ 1.301 kg/rm) and double groove rectangular section 101.60 x 44.45 x 1.50mm (Section No 20028 of jindal wt @ 1.301 Kg/rm) including jointing cleats and glazing clips for fixing builder hardware fittings and half portion covered with 5.5 mmthick selected quality frosted or plain glass balance portion covered with 4mm thick ACP sheet including necessary fittings/fixture/aluminium snap beads, sleats etc complete all as specified and directed. |
| 27 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete all as specified and as directed. |
| 28 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 29 | S&F Mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 30 | M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 31 | M&LMild steelFramed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 32 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 33 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 34 | M&L 4mm thick suspended false ceiling HPSC (high pressure steam curved) pre-primered fibre cement non asbestous building board similar to E-Board Classic placed in a grid of size 605x605mm with aluminium powder coated angle/channel/tee section duly suspended with 4mm dia GI hanger fixed with GI hooks 4mm dia and fastner as required at the site including two coat of oil bound distemper complete all as specified and directed.Detail of section are as under:-(i) Aluminium Angle 25mm x 25mm x 1.5mmt thick.(ii) Aluminium Cross Tee 25mm x 25mm x 1.5mmt thick.(iii) Aluminium Main Tee 25mm x 38mm x 1.5mmt thick.Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on ceiling board |
| 35 | M&LColoured /digital vitrified ceramic floor tiles dark shed 8-9 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 8-9mm) as in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor make incl 15 mm thick screed bed or bedding of layers in CM 1:6 complete all as specified and as directed. |
| 36 | M&L Glazed Ceramic Coloured Tile 450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 37 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed. |
| 38 | M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of external wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5 mm thickin cement morter (1:4) using water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured andpaid separately) |
| 39 | \"Supply only\" liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 40 | M&L Preparing new Surfaces of Walls andapplying Two Coats of DistemperOil Emulsionover a coat of primer andapplied over 2mm thick (appx) water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 41 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls andapplying Two Coats of DistemperOil Emulsionover a coat of primer andapplied over 2mm thick (appx) water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 42 | M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paintover a coat of primer heigh upto G+9 bldg including necessary scaffolding and safety measurers complete all as specified and as directed. |
| 43 | M&L preparation ofold painted steel surface over 10cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 44 | M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 45 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11fittings fixed on Walls, Ceiling or laid in Floors or any other Situation,etc up to G+9 stories height of bldgs. complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 46 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11fittings fixed on Walls, Ceiling or laid in Floors or any other Situation,etc up to G+9 stories height of bldgs. complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 47 | S&F CPVC pipes 32 mm outer diameter of SDR 11 & plain CPVC SDR 11fittings fixed on Walls, Ceiling or laid in Floors or any other Situation,etc up to G+9 stories height of bldgs. complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 48 | S&F CPVC pipes 40 mm outer diameter of SDR 11 & plain CPVC SDR 11fittings fixed on Walls, Ceiling or laid in Floors or any other Situation,etc up to G+9 stories height of bldgs. complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 49 | S&F CPVC pipes 50 mm outer diameter of SDR 11 & plain CPVC SDR 11fittings fixed on Walls, Ceiling or laid in Floors or any other Situation,etc up to G+9 stories height of bldgs. complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 50 | S&F20mm bore brass MTA for CPVC pipe ascomplete all as specified and directed. |
| 51 | S&F20mm bore brass FTA for CPVC pipe ascomplete all as specified and directed. |
| 52 | S&F 20mm bore brass elbow for CPVC pipe ascomplete all as specified and directed. |
| 53 | S&F 20mm bore brass Tee for CPVC pipe ascomplete all as specified and directed. |
| 54 | S&F 20mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed ascomplete all as specified and directed. |
| 55 | S&F25mm bore brass MTA for CPVC pipe ascomplete all as specified and directed. |
| 56 | S&F25mm bore brass FTA for CPVC pipe ascomplete all as specified and directed. |
| 57 | S&F 25mm bore brass elbow for CPVC pipe ascomplete all as specified and directed. |
| 58 | S&F 25mm bore brass Tee for CPVC pipe ascomplete all as specified and directed. |
| 59 | S&F 25mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed ascomplete all as specified and directed. |
| 60 | S&F32mm bore brass MTA for CPVC pipe ascomplete all as specified and directed. |
| 61 | S&F32mm bore brass FTA for CPVC pipe ascomplete all as specified and directed. |
| 62 | S&F 32mm bore brass elbow for CPVC pipe ascomplete all as specified and directed. |
| 63 | S&F 32mm bore brass Tee for CPVC pipe ascomplete all as specified and directed. |
| 64 | S&F 32mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed ascomplete all as specified and directed. |
| 65 | S&F40mm bore brass MTA for CPVC pipe ascomplete all as specified and directed. |
| 66 | S&F40mm bore brass FTA for CPVC pipe ascomplete all as specified and directed. |
| 67 | S&F 40mm bore brass elbow for CPVC pipe ascomplete all as specified and directed. |
| 68 | S&F 40mm bore brass Tee for CPVC pipe ascomplete all as specified and directed. |
| 69 | S&F 40mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed ascomplete all as specified and directed. |
| 70 | S&F50mm bore brass MTA for CPVC pipe ascomplete all as specified and directed. |
| 71 | S&F50mm bore brass FTA for CPVC pipe ascomplete all as specified and directed. |
| 72 | S&F 50mm bore brass elbow for CPVC pipe ascomplete all as specified and directed. |
| 73 | S&F 50mm bore brass Tee for CPVC pipe ascomplete all as specified and directed. |
| 74 | S&F 50mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed ascomplete all as specified and directed. |
| 75 | Supply and fix Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 50 mm bore GI pipe complete as specified and as directed |
| 76 | S&F in repair PVC (SWR) Soil, Waste and Ventilating Pipe 150mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, up to G+9 stories height of bldgs. complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 77 | S&F PVC (SWR) bend any radius 160mm bore fixed with rubber ring up to G+9 stories height of bldgs including necessary scaffolding and safety measures, complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 78 | S&F PVC (SWR) tee any radius 160mm bore fixed with rubber ring up to G+9 stories height of bldgs including necessary scaffolding and safety measures, complete as all specified and as directed.Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly. |
| 79 | Taking down and refixing of bib tap, angular stop cock etc including S&F taflon tape extension short piece complete all as specified and as directed. |
| 80 | Taking down and refixing of wall mixture, basin mixture, sink mixture including S&F taflon tape extention short piece etc complete all as specified and as directed. |
| 81 | Taking down and refixing of corner shelf, glass shelf, mirror, towel ring etc including S&F bullets and screw complete all as specified and as directed. |
