|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all specified and directed. |
| 3 | Taking down chowkats or frames n exc 1.50 Sqmwith shutters (without taking off shutters from the frame) complete all specified and directed. |
| 4 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (below or above ground level) complete |
| 5 | Demolition of brick work or stone masonery built in cement mortar complete all as specified and directed. |
| 6 | Dismantling oftiles/stone slabs of any description or any thickness in floors, apronslaid or bedded and pointed in any mortar complete all as specified and directed |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete. |
| 8 | M&L for granite 18-20 mm thick (of any colour/type) work (table rubbed and polished) in steps , jambs, pillars, window cills cooking plateform and like in cement mortar (1:4) including pointing in white cement(1:2) using marble dust,with admixture of pigment to match the shade of granite including grinding, moulding and polishing complete all as specified and directed. |
| 9 | M&L fly ash brick work with modular \"B\" bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 all as specified and directed. |
| 10 | M&L for fly ash brick work with modular \"B\" bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed. |
| 11 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed. |
| 12 | S&F 4.8 mm thicksheet glass is ground or obscured or frosted, on one side, ordinary quality and glazing with rubber gasket in square not exceeding 0.5 Sqm in each pane for aluminium window, door, ventilator complete all as specified and directed. |
| 13 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square not exceeding 0.5 Sqm in each pane for aluminium window, door, ventilator complete all as specified and directed. |
| 14 | S&F 4.8 mm thicksheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 sqm in each pane for aluminium window, door, ventilator complete all as specified and directed. |
| 15 | S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 16 | M&Lnon skid coloured ceramictiles 7 to 8mm thick (square/rectangular) area of each tile exe 0.18 sqm but not exe 0.38 sqm in floors etc.set and jointed in cement slurry and pointedwith white or coloured cement to match surfaace of tile and including screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complette all as specifed and directed |
| 17 | M&L for glazed ceramic tilesin vertical surfaces 350x250x7mm/ 450x350x7mm thickset and jointed in neat cement slurry and pointed with white or coloured cement to match of tile and including screed bed or beding layer of mortar 10mm thick for laying floor finish in CM 1:4 complette all as specifed and directed |
| 18 | S&F in repairs solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 19 | S&F in repairs factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails mild steel frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails, lock rail & bottom rail, panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm mild steel solid tube. The wire gauge shall be stretcheded to tighten firmly complete all as specified and directed. |
| 20 | S&F for 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 21 | S&F for 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed. |
| 22 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 23 | S&F in repairs of 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed. |
| 24 | S&F in repairs to CP health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specfied and directed. |
| 25 | S&F in repair half stall type, vitreous china urinal white colour of size 710x480x300mm, 1st quality with sensotronic, sensor flushing valve with complete kit including CP waste with PVC down waste pipe upto floor level (complete set) complete all as per manufacturer instructions all as specified and directed. |
| 26 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed. |
| 27 | S&F in repairs pvc, low level, flushing cisternof 10 litres capacity with all internal fittings including flush pipe and fixing to supply pipe complete all as specified and directed. |
| 28 | M&L in repair 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and direcetd. |
| 29 | S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower all as specified and directed. |
| 30 | S&F in repairs 15 mm angle valve, stop cock cast copper alloy, screwed down high pressurechromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 31 | S&F in repairs 15 mm bib taps, cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed. |
| 32 | S&F in repairs PVC connection, 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 33 | S&F 15 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 34 | S&F 20 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 35 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 36 | S&F in repairs of WHB, oval type of selected quality fixed withgranite counter of approved make decorative type including cuppling and waste pipe complete fixedall as specified and directed. |
| 37 | S&F of 5 mm thick looking mirror of selected quality glass with wooden back and edge and fixed to wooden plugs with chromium plated screws complete all as specified and directed. |
| 38 | S&F 75 mm, PVC(SWR) pipes, single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed. |
| 39 | S&F 110mm, PVC(SWR) pipes, singlesocketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed. |
| 40 | S&F 75mm PVC(SWR) bend without access door complete all as specified and directed. |
| 41 | S&F 75mmPVC(SWR) junction single (single \"T\") equal or unequal complete all as specified and directed. |
| 42 | S&F 75mm PVC(SWR) vent cowl complete all as specified and directed. |
| 43 | S&F110mm PVC(SWR) vent cowl complete all as specified and directed. |
| 44 | S&F PVC(SWR) 110 mm bend without access door complete all as specified and directed. |
| 45 | S&F rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed. |
| 46 | S&F 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipewith epoxycoated aluminium rod complete all as specified and directed. |
| 47 | S&F in repairs overhead square shower size 150mmx150mm complete all as specified and directed. |
| 48 | S&Ffor tubular towel rail, chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 49 | S&F in repairs CP towel ring round with round flangecomplete all as specified and directed by engr in charge |
| 50 | S&F in repairs 10 inches, corner glass shelf (with bracket) all as specified and directed |
| 51 | S&F in repairs CP toilet paper holder with stainless steel flapcomplete all as specified and directed by engr in charge |
| 52 | S&F in reapirsoap dish holder of bootom CP and glass holder for soapcomplete all as specified and directed by engr in charge. |
| 53 | S&F in repair of stainless steel grating of 125 mm dia size, complete all as specified and directed. |
| 54 | S&F in repair of stainless steel, grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed. |
| 55 | S&F in repairs gun mental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 56 | M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls/ceilingall as specified and directed. |
| 57 | M&L for 15 mm thick rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound including taking down cement plaster on brick or stone walls/ceilingall as specified and directed. Note- water proofing compound will be measured and paid seperately. |
| 58 | M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfacesas in ceiling including taking down cement plaster on brick or stone walls/ceiling complete all as specified and directed. |
| 59 | M&L for preparation and chalk whitening of newly plastered surface of wall and applying two coats of distemper oil emulsion over a coat of white cement based putty complete all as specified and directed. Note-Wall care putty will be measured and paid seperately. |
| 60 | M&L for complete removal of old existing surface treatment of wall and applying two coats of oil emulsion distemper over one coat ofwhite cement based putty all as specified and directed.Note-Wall care putty will be measured and paid seperately. |
| 61 | M&L for preparation of new plastered surface of wall and applying two coat ofexterior weather proof water base emulsion paintwhite/coloured over one coat of white cement based putty all as specified and directed by Engr-in-Charge.. Note :-(1). Exterior Acrylic emulsion paint only, Should be carried out by any of approved company /firm and authorized applicator. The work under this item shall be carried out by the authorized applicator of manufacturer by using modern techniques.The contractor shall also furnish warranty of quality, finish work and effectiveness of painting under this item for a period of 05 years from the date of completion alongwith manufacturer warranty of material for the same period complete all as specified and directed.(2). Wall care putty will be measured and paid seperately. |
| 62 | M&L for preparation of newlyplastered surface of ceiling by brooming down and applying three coat of white wash complete |
| 63 | Taking down existing old roof treatment of any description, any type including removal old Tar felt, screed bed and plastering etc complete all as specified and directed. |
| 64 | M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen@ 1.2kg/sqm(paid separately)by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and as directed. |
| 65 | M&L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete Roof slab at least for 72 hrs complete all as specified and directed. |
| 66 | M&L for cement concrete type B0 1:2:4(using 12.5mm graded stone aggregate ) benching/ angle filleting at the junction of parapet and RCC roofcomplete all as specified and as directed. |
| 67 | M & L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed. |
| 68 | Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. Note:- Water proofing compound will be measured and paid separately. |
| 69 | M&L for bituminous 85/25 @ 1.2kg/sqm in each coat to be applied on prepared surface till the surface is properly impregnated complete all as specified and directed |
| 70 | M&L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound will be measured and paid for separately. |
| 71 | M&L for grout of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipenozzle under the pressure of 5 kg/sqcm using cement based grout, grouting work as per manufacturer instructions complete all as specified |
| 72 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light,fan, socket or power) including fixtures and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 73 | Dismantling/taking down of unserviceableold existing service /submain wire of any size all as specified and directed |
| 74 | Taking down of unserviceabledistribution boards with MCBs complete all as specified and directed. |
| 75 | Taking down ofold existing exhaust fan of any size any type and deposited to MES store complete all as specified and directed |
| 76 | Taking down ofold existing geyser of any size any type and deposited to MES Store all as specified and directed |
| 77 | Taking down and refixing ofold existing geyser of any size any type after petty repairing in serviceable condition including new nylon baired 600 mm long PVC pipe connection all as specified and directed |
| 78 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FRLS H cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost ofcutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and pointing in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note:- Cutting chase andmaking good shall be included in the quated rates. |
| 79 | All as per serl item No. 77.00 here-in-before but for one switch socket combination5/6 amp on independent board complete all as specified and directed. |
| 80 | All as per serl item No. 77.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed. |
| 81 | All as per serl item No. 77.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed. |
| 82 | S&F modular switch, one way, 6 Amp, one module, 240 volts complete all as specified and directed. |
| 83 | S&F modular socket outlet 2-in-1,6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 84 | S&F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed. |
| 85 | S&F modular socket outlet 2-in-1,6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 86 | S&F for ceiling rose 2/3 terminals 65x25 mm diapoly carbonate isolated ISI marked all as specified and directed. |
| 87 | Supply & fixing LED tube light complete fitting 20 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible xopper conductor cable of suitable size from ceiling rose comlete all as specified and directed. |
| 88 | S&F in replacement single pole and neutral sheet metal enclosure with two pin and earth, plugand socket, suitable for single phase 240 V,complete with and including one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top complete all as specified and as directed. |
| 89 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulated FRLSH cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section areaand drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 90 | S&F in repair sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 54 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB will be measured and paid seperatly. |
| 91 | S & F in repairs MCB, SP suitable for 240 volts, AC supply 6to 32 Amps ,with over load and short circuit protection and rupturing capacity not less than 10KA \"C\" connection with suitable size copper lugs curve includingcomplete all as specified and directed. |
| 92 | S&F in repair MCB, TPN suitable for 240 volts, \"B\" curve, AC,63 Amps with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed. |
| 93 | Supply and fix heavy duty exhaust fan, steel body AC single phase, 230V of size 380 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. |
| 94 | Supply and fix horizontal type storage water heater of capacity 50 litre having excellent corrosion resistance, advanced 3 level safety fixture, high grade stainless steel tank with glass line coated, powerful heating element, auto cutoff,5 star rated energy efficient, LED indicator including all necessary items such as NRV, connection pipe etc.complete all as specified and directed |
| 95 | M&Lfor earthing complete with galvanised steel earth plate electrode size 600X600X6mm thickburried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm diaby means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all asshown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregatereinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GIprotection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed.Note:- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 96 | Deduct Schedule of credit (calculation will be done off line)Rs. 79727.00 |
