Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Comprehensive maintenance of UPS systems up to 3 KVA capacity -9 Nos, of any make, including attending breakdowns/complaints, fault finding, checking, repairing and replacement of minor unserviceable electronic components such as diodes, resistors, triodes, LED indicators, capacitors and other minor electronic parts of the existing make, and testing the UPS after repairs to the satisfaction of the Engineer-in-Charge, complete all as specified and directed. |
| 2 | Comprehensive maintenance of UPS system 3.5 KVA to 6.25 KVA capacity – 12 Nos of any make, including attending faults/complaints, checking, repairing and replacement of minor parts such as diode, resistor, triode, LED lamps, condenser and other minor electronic components as per existing make, complete all as directed and testing after repairs to the satisfaction of Engineer-in-Charge. |
| 3 | Comprehensive maintenance of UPS system 20 KVA capacity – 1 No of any make, including attending faults/complaints, checking, repairing and replacement of minor parts such as diode, resistor, triode, LED lamps, condenser and other minor electronic components as per existing make, complete all as directed and testing after repairs to the satisfaction of Engineer-in-Charge. |
| 4 | Comprehensive maintenance of UPS system 30 KVA capacity – 1 No of any make, including attending faults/complaints, checking, repairing and replacement of minor parts such as diode, resistor, triode, LED lamps, condenser and other minor electronic components as per existing make, complete all as directed and testing after repairs to the satisfaction of Engineer-in-Charge. |
| 5 | Comprehensive maintenance of UPS system 40 KVA capacity – 1 No of any make, including attending faults/complaints, checking, repairing and replacement of minor parts such as diode, resistor, triode, LED lamps, condenser and other minor electronic components as per existing make and installed at Bldg INDS, complete all as directed and testing after repairs to the satisfaction of Engineer-in-Charge. |
| 6 | Comprehensive maintenance / cleaning of solar power system of capacity 9 KW having panel efficiency around 20.1%, completewith 150 AH batteries – 18 Nos and 3.5 KVA solar inverter – 03 Nos of any make, including attending faults/complaints, checking, repairing and replacement of minor parts such as connectors, leads, LED lamps and minor electronic components as per existing make, as directed, and testing after repairs to the entire satisfaction of the Engineer-in-Charge. |
| 7 | Note (Common to Item Nos. 1.00 to 6.00):(i) The cost of minor parts required for maintenance shall be deemed to be included in the quoted rates.(ii) Two (02) visits per month shall be made by the technician, and all breakdowns shall be attended as per intimation/call, and the rate quoted shall be deemed to include the same. |
| 8 | S & F in replacement of Commercial UPS system of 5.2 KVA capacity, sine-wave output, rated output power 4420 watts, maximum charging current 21 amperes, Max VA rating 3501–5500 VA, with inbuilt protections for deep discharge, MCB, overload and short-circuits, digital display, fast charging feature, easy UPS bypass, Net Weight 44.5 kg; including taking down the existing system, installation, connection and testing to the satisfaction of the Engineer-in-Charge, complete all as specified and directed. |
| 9 | S & F in replacement of solar panel of size 1656 mm × 991 mm × 40 mm, 270 Wp, 12/24 V operation, Max voltage (Vmp) 31.5 V, Max current (Imp) 8.57 A, including taking down existing panel, fixing, connection and testing to the satisfaction of Engineer-in-Charge, complete all as specified and directed. |
| 10 | S & F in replacement of solar panel of size 600 mm × 450 mm × 40 mm, 40 Wp, 12 V, Max voltage (Vmp) 21.5 V, Max current (Imp) 2.48 A, including taking down existing system, fixing and testing complete all as specified and directed. |
| 11 | S & F in replacement of unserviceable UPS battery, 12 Volts, 7.2 AH capacity, sealed maintenance-free type, including taking down old battery and fixing the new one complete all as specified and directed. |
| 12 | All as per Item No. 10.00 above, but for 12 Volts, 18 AH capacity. |
| 13 | All as per Item No. 10.00 above, but for 12 Volts, 26 AH capacity. |
| 14 | All as per Item No. 10.00 above, but for 12 Volts, 42 AH capacity. |
| 15 | S & F in replacement of unserviceable solar charging battery, 12 Volts, 150 AH capacity, Red Charge RC 18000 tall tubular battery (long backup, low-maintenance), filled height 503 × 189 × 41 mm, including taking down old battery complete all as specified and directed. |
| 16 | S & F in replacement of unserviceable lead-acid battery, 12 Volts, 150 AH capacity, Inverlast tall tubular type, high-life and low-maintenance, including taking down old battery complete all as specified and directed. |
| 17 | SS & F in replacement of FRP solar street-light battery box, 5 mm thickness, black colour, weight up to 5 kg, fixed to pole with MS clamp 25×5 mm duly painted with one coat red oxide and two coats silver paint, including dismantling old battery box complete all as specified and directed. |
| 18 | S & F in replacement of Solar LED standalone street light, 45 Watts,Minimum efficiency 120 Lumen/watt, system voltage 24 V, luminous output 4725 lumens; with MPPT controller, SPV Panel 200 Wp (2 × 100 Wp), low-maintenance lead-acid tubular battery 120 AH (2 × 60 AH), hot-dip galvanized tubular pole (6 m above ground level) with base plate and all accessories; including dismantling old box, repainting hardware with one coat red oxide and two coats synthetic enamel (blue/silver), complete all as specified and directed.Note : Earth work and PCC foundation will be measured and paid separately. |
| 19 | S & F in replacement of mild-steel solar street-light battery box, 5–10 mm thickness, rectangular shape, single phase, weight up to 10 kg, fixed to pole with MS clamp 25×5 mm painted with one coat red oxide and two coats enamel (blue/silver), including taking down existing battery box complete all as specified and directed. |
| 20 | S & F in replacement of PVC insulated, sheathed, multi-stranded flexible copper conductor cable, 2.5 sqmm × 3-core, drawn through existing conduit/pipe from junction box to fitting, including taking down old unserviceable cable complete all as specified and directed. |
| 21 | Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. |
| 22 | Excavation in trenches not exc 1.5 mtr wide and not exc3.0 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. |
| 23 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils all as specified and directed by Engineer-in-Charge. |
| 24 | Removing excavated material from the site of work to outside MD land all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for replacement of Solar Street Light hot-dip galvanized tubular pole of 80 mm dia, 7.5 m long, complete with cast-iron base plate, finial taper plug, bolts, nuts and screws, including applying one coat of steel primer and two coats of aluminium paint, marking of pole serial number as per existing, and taking out old corroded/broken pole by cutting or digging, complete all as specified and directed by Engineer-in-Charge.Note: Earthwork and PCC foundation shall be measured and paid separately. |
| 26 | M&L for replacement of Post-Top Lantern GI tubular pole 50 mm dia, 5 m long, including applying one coat of steel primer and two coats of synthetic enamel paint (block colour), marking of pole serial number as per existing, and taking out old corroded/broken pole by cutting or digging, complete all as specified and directed by Engineer-in-Charge.Note: Earthwork and PCC foundation shall be measured and paid separately. |
| 27 | M&L PCC 1:4:8, type D-2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete for steel poles, complete all as specified. |
| 28 | M&L PCC 1:2:4, type B-1 (using 20 mm graded granite stone aggregate) as in coping for steel poles including necessary formwork, complete all as specified. |
| 29 | S&F in repairs of street-light bracket, bent to shape as required, made of 40 mm dia, 1 m long GI light-grade pipe, fixed to pole/wall with flat-iron clamps of size 40×6 mm (two numbers), with nuts and bolts, for fixing street-light fitting including making all electrical connections , complete all as specified and directed. |
| 30 | M&L TMT bars / Mild-steel angle cross arms, bracings, supports, clamps and back plates, fabricated from structural steel sections, including nuts, bolts, washers, welding, bending (hot or cold), drilling holes, in any required shape or size, and including one coat of primer, one under-coat of aluminium paint, and one finishing coat of aluminium paint (for supporting frames for flood-light fittings), complete all as specified. |
| 31 | M&L for Replacement of steel tubular swaged poles, complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-22 (8.5 metre long). Applying one coat of steel primer and one coat of aluminium paint and marking pole serial number as per existing, including taking down old unserviceable/broken pole by cutting or digging, complete all as specified and directed by Engineer-in-Charge.Note: Earth work and PCC foundation shall be measured and paid separately. |
| 32 | Supply and fixing in replacement of PVC insulated, stranded copper conductor cable, size 2 × 2.5 sqmm + 1 × 1.5 sqmm, connecting from FRP looping box to street light fitting connector, passed through steel tubular pole including all fixing arrangements after taking out old unserviceable cable, complete all as specified and directed. |
| 33 | S&F in replacement of FRP junction box, size 300 × 200 × 110 mm, including four-way connector blocks suitable for 35 sqmm × 3.5 core cable (two numbers), with suitable gland, thimbles, nuts, washers, and supports using flat aluminium clamps (not less than 25 mm × 3 mm), fixing with pole, including taking down old junction box of any type, complete all as directed. |
| 34 | S&F in replacement of MCB TPN 32 Amp, 10 kA, 415 V, 50 Hz, AC, complete. |
| 35 | S&F in replacement of MCB TPN 63 Amp, 10 kA, 415 V, 50 Hz, AC, complete. |
| 36 | Taking down old unserviceable Flood light fitting (MV/HPSV) of any wattage and S&F in LED Flood Light 150 W,Minimum efficiency 120 Lumen/watt with secondary optics made in pressure die-cast housing and aluminium extrusion heat sink, IP66 protection, complete all as specified and directed. |
| 37 | Taking down old unserviceable street light fitting (MV/HPSV) of any wattage and S&F in LED Street Light 120 W,Minimum efficiency 120 Lumen/watt, with secondary optics in die-cast housing and aluminium extrusion heat sink, IP66 protection, complete all as specified and directed. |
| 38 | Taking down old unserviceable Post Top light fitting of any wattage and S&F in LED Post Top Lantern 40 W,Minimum efficiency 120 Lumen/watt, made in cast aluminium with decorative opal polycarbonate diffuser, IP65 protection, complete all as specified and directed. |
| 39 | Taking down old unserviceable Post Top light fitting of any wattage and S&F in LED Post Top Lantern 25 W,Minimum efficiency 120 Lumen/watt, made in cast aluminium with clear opal acrylic diffuser, IP65 protection, complete all as specified and directed. |
| 40 | Taking down old unserviceable Post Top light fitting of any wattage and S&F in LED Post Top Lantern 45 W,Minimum efficiency 120 Lumen/watt, cast aluminium body with glare-free indirect lighting and IP65 protection, complete all as specified and directed. |
| 41 | Taking down old unserviceable Bollard/Garden light fitting and S&F in 9 W LED,Minimum efficiency 120 Lumen/watt, Bollard, high durability, high impact resistance, ingress protection, providing soft uniform lighting, complete all as specified and directed. |
| 42 | M & L for earthing complete with Galvanised steel earth plate eletrode 60cmx60cmx6mm thick buried directly in ground vertically to (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised Iron Strip of size 32x6mm size, by means of Bolts, Nuts, Check Nuts and washer made of GI or Steel Earth connecting with test point, provision of Charcal and salt in alternate layers, watering pipe 20mm dia medium grade MS funnel with jali, PCC M-15 Type B-1 in pit with XPM not elss than 4Kg per Sqm and Earthpit with cover returning, filling, removing excavated material all as specified in electrical plate No 3 of SSR Part-I making good excavated surfaces such as hard standing refixing machine pressed precast concrete interlocking paver blocks removed during excavation on earthpit to mach existing surfaces after taking out old/unserviceable one complete and testing on completion all as specified and directed by Engr-in-Charge. |
| 43 | M & L for Galvanised iron strip 32 x 6mm burried in ground or fixed on walls/floor with suitable saddles and screws beyond 7.5mtr of earth lead connecting with test point after taking out old/unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 44 | S & F test point terminal block for connecting the earth pit and down conductor or aluminium strip, made of gun metal or phosphorus bronze, size 75×75×25 mm, drilled and screwed, including 3 Nos 8 mm dia, 25 mm long hex-head screws, after taking out old/unserviceable one, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Comprehensive maintenance and M&L for overhauling of HOT Crane of 5-ton capacity, bay length 80.0 m, span 20.0 m, and height of lift 4.0 m from floor level, situated at AC Plant / DG Set room, including monthly maintenance for renewal of unserviceable gears, oiling and greasing chain pulleys, load test, verticality test and deflection test, complete all as specified and directed.NOTE:(a) All miscellaneous items required for satisfactory completion of the job are deemed to be included in the unit rate.(b) Contractor must employ minimum one experienced and trained electrician knowledgeable in cranes and one helper to carry out monthly regular maintenance; cost deemed to be included in unit rate.(c) Technician is responsible for cleaning and maintenance of HOT cranes under monthly maintenance.(d) Necessary tools and plants such as ladder, etc., needed to attend breakdowns shall be provided by the contractor at no extra cost.(e) Contractor shall submit identity proof of technician/person visiting the site and take responsibility for integrity of personnel attending breakdowns and monthly visits.(f) Full load test with 10% overload shall be carried out once during contract period; payment will be made under respective item as applicable. |
| 46 | Supply and fixing in repair/replacement of MS chain pulley block, 5.0 Ton capacity, standard lift 9 metres, lift speed 2–8 metres/min, suitable for HOT crane 5.0 Ton, complete all as specified and directed. |
| 47 | Disconnecting and removing the unserviceable fan belt from DG set and supplying & fixing new fan belt of same size and capacity for 1000 KVA / 1500 KVA DG set, complete all as directed by Engineer-in-Charge.Make: Fenner / LUCAS / TVS. |
| 48 | Disconnecting and removing the unserviceable diesel filter from 1000 KVA / 1500 KVA DG set, and supplying & fixing new diesel filter assembly including cleaning filter cell and fixing filter element with rubber gasket, complete all as specified. |
| 49 | Disconnecting and removing the unserviceable diesel filter from 62.5 / 40 KVA DG set, and supplying & fixing new diesel filter assembly including cleaning filter cell and fixing filter element with rubber gasket, complete all as specified. |
| 50 | Disconnecting and removing the unserviceable oil filter from 1000 KVA / 1500 KVA DG set, and supplying & fixing new oil filter assembly including cleaning filter cell and fixing filter element with rubber gasket, complete all as specified. |
| 51 | Disconnecting and removing the unserviceable oil filter from 62.5 / 40 KVA DG set, and supplying & fixing new oil filter assembly including cleaning filter cell and fixing filter element with rubber gasket, complete all as specified. |
| 52 | Disconnecting and removing the unserviceable air filter from 1000 KVA / 1500 KVA DG set, and supplying & fixing new air filter assembly including cleaning filter cell and fixing filter element with rubber gasket, complete all as specified. |
| 53 | Disconnecting and removing the unserviceable air filter from 62.5 / 40 KVA DG set, and supplying & fixing new air filter assembly including cleaning filter cell and fixing filter element with rubber gasket, complete all as specified. |
| 54 | Supply and filling of engine oil 20W/40, complete as specified. |
| 55 | Taking down unserviceable speed control unit and supplying & fixing new electronic speed control unit with necessary terminal connections suitable for 1000 KVA / 1500 KVA DG sets, complete all as specified. |
| 56 | Taking down unserviceable automatic voltage regulator and supplying & fixing new AVR with UVN, PQ, F1-F2 terminals, rated voltage up to 180V, suitable for 1000 KVA / 1500 KVA DG sets, complete all as specified. |
| 57 | Taking down unserviceable automatic voltage regulator and supplying & fixing new AVR with UVN, PQ, F1-F2 terminals, rated voltage up to 180V, suitable for 62.5 KVA DG sets, complete all as specified. |
| 58 | Supply and topping up of coolant, complete as specified. |
| 59 | Disconnecting and removing the unserviceable battery charging unit and supplying & fixing new battery charging unit suitable for 12/24V batteries, including installation inside AMF panel enclosure, complete as specified. |
| 60 | Taking down old fuel/oil pipeline with banjo bolt and supplying & fixing new high-pressure rubber fuel/oil pipeline with steel armour protection, complete as specified. |
| 61 | Taking down self-starter assembly from engine for repair/service, including replacement of worn-out parts, complete as specified.Note: Spare parts shall be measured and paid separately. |
| 62 | Supply only, solenoid switch of any type suitable for self-starter, complete as specified. |
| 63 | Supply only, carbon brush set of any type with brush holder, complete as specified. |
| 64 | Supply only, drive-end plunger, complete as specified. |
| 65 | Rewinding of field coils using existing gauge super-enamelled copper wire, complete as directed. |
| 66 | S&F in replacement of unserviceable lead-acid battery, 12V, 180/200 AH capacity (Inverlast tall tubular type), including taking down old battery, complete as specified. |
| 67 | Supply and filling of DG set batteries with distilled water and acid mix, complete at various locations as directed. |
| 68 | Supply and fixing engine control/protection relay with auto/manual mode, contactor close/open, DG start/stop functions, suitable for 1000 KVA / 1500 KVA DG sets, including taking down old relay, complete as specified. |
| 69 | Supply and fixing injector overflow pipe including taking down unserviceable pipe, complete as specified. |
| 70 | Taking down dynamo assembly from engine for repair or replacement of worn-out parts and refixing the same including checking proper charging, complete as directed. |
| 71 | Supply and fixing non-return banjo bolt including taking down old defective unit, complete as specified. |
| 72 | M&L for dismantling, transporting injectors to authorised workshop for servicing/testing/calibration, including replacement of injector nozzles and ‘O’ rings and refixing the same at site, complete as specified. |
| 73 | M&L for opening of fuel injection pump, calibration and bench testing, and refixing after calibration, complete as specified. |
| 74 | Disconnecting and removing defective wiring from AMF panel and rewiring with copper conductor of existing size/gauge, including replacement of timers, contactors, overload relays, micro-processor control units and all associated parts for DG sets 1000/1500 KVA, complete as directed. |
| 75 | Supply and fixing auxiliary contactors (existing type) with logic units, complete as specified. |
| 76 | Supply and fixing in replacement of unserviceable fuel feed pump, complete as directed. |
| 77 | M&L for removing old rusted paintfrom complete DG Set surfaces ofthe 62.5/40KVA capacity & AMF/DG panel complete with one coat of Primer andtwo coat ofspray painting one by one with existing colour paint synthetic enamel type including writing Ser No of DG set complete all as specified and directed. |
| 78 | Supply and fixing in replacement of radiator rubber hoses for 1000 KVA / 1500 KVA DG set, complete as specified. |
| 79 | Supply and fixing in replacement of clamp hump hose for 1000 KVA / 1500 KVA DG set, complete as specified. |
| 80 | Supply and fixing in replacement of hose clamps for 1000 KVA / 1500 KVA DG set, complete as specified |
| 81 | Supply and fixing in replacement of hump hose for 1000 KVA / 1500 KVA DG set, complete as specified |
| 82 | M&L for draining out fuel tank of DG set of capacity 1000 Ltrs and above, keeping fuel in separate container, disconnecting all fuel lines and mechanical connections, taking out the fuel tank for internal & external cleaning by removing accumulated dirt/sediment, leak testing, welding/brazing as required, applying one coat of black synthetic enamel paint, refixing the tank in original position, replacing drain plug and PVC pipe protected with steel flexible pipe, calibrating the fuel tank, refilling the drained fuel back into the tank, marking litres on gauge and providing locking arrangement, complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in replacement of defective engine oil control pressure switch suitable for 1000 KVA/1500 KVA DG set of make Kirloskar/Cummins, complete all as directed by Engineer-in-Charge. |
| 84 | Dismantling of exhaust pipe of 1000 KVA/1500 KVA DG set by unscrewing nuts & bolts, taking down pipe with muffler, removing burnt-out asbestos rope, wrapping with new aluminium cladding with glass wool, cleaning silencer and refixing in original position, complete all as directed by Engineer-in-Charge. |
| 85 | Complete opening and dismantling of chimney hood and smoke duct, removing rusted nut bolts, supports, angles, clamps, brackets, anchor fasteners, washers etc;Cleaning entire hood/smoke duct by removing dust, ash, smoke, oil using cleaning agent;Replacement of nut bolts/washers, repairs and maintenance of aluminium filter, sheet, replacement of damaged filter, aluminium sheet of suitable gauge, oiling/greasing of nuts/bolts, all joints, replacement of worn-out smoke duct cloth, maintenance of blower fan & motor including painting with heat resistant aluminium paint, complete all as directed by Engineer-in-Charge. |
| 86 | Supply and fixing in replacement of MU–Automatic DOL starter, 3 phase, 415 volts, 50 Hz AC supply, suitable for 7.5 HP motor, complete all as directed by Engineer-in-Charge. |
| 87 | Taking down blower motor of capacity 7.5 HP, 3 phase, 240 volts AC, for rewinding with suitable gauge, insulating, drying, reinstalling, testing and commissioning including electrical connection, complete all as directed by Engineer-in-Charge. |
| 88 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including removal of all fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. Taking credit for retrieved materials and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed. |
| 89 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and S&Fmodular sunken boxes with modular white cover plate with frame, suitable for mountingswitches, sockets, fan regulators as required for one light point controlled by one switch. (Note-1. The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring |
| 90 | All as per item No. 88 as in above but one fan point controlled by one switch. |
| 91 | All as per item No. 88 as in above but one socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 92 | All as per item No. 88 as in above but one socket outlet 6 amp controlled by one switch on indepdendent board. |
| 93 | All as per item No. 88 as in above but one bell point controlled by one bell push. |
| 94 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories S&Fmodular sunken boxes with modular white cover plate with frame, suitable for mounting switches, sockets as required for one socketpoint 16 Ampcontrolled by one switch. (Note-1. The cost of cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring |
| 95 | M & L in replacement of point wiring with two run ofPVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Block colour), 1100 volts grade cable, FRLS, passing through PVC casing caping 25/32mm including accessories andS&F PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- |
| 96 | One light point controlled by one way switch. |
| 97 | One fan point controlled by one way switch with fan regulator. |
| 98 | One 3 pin socket outlet, 5 Amps on the same board with other switches. |
| 99 | One 3 pin socket outlet, 5 Amps on the Independent board. |
| 100 | One bell/buzzer point controlled by one bell switch on the same board or independent board with other switches. |
| 101 | All as per item No 88.00above but with 4.0 sqmm cable for one 3 pin socket outlet 1 Ampson the independent board. |
| 102 | S & F in replacement of ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed. |
| 103 | M & L in replacement ofbuzzer, ding dong, AC, 230V single pole complete all as specified and directed. |
| 104 | M & L in replacement of modular switch, 1 way 6 Amp, 1 module complete all as specified and directed. |
| 105 | M & L in replacement of modular bell switch 6Amp, 1 module complete all as specified and directed. |
| 106 | S & F in replacement of modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed. |
| 107 | S & F in replacement of modular socket6A/16A, 2/3 pin combined 2 module complete all as specified and directed. |
| 108 | M & L in replacement of modular switch, 1 way 16 Amp, 1 module complete all as specified and directed. |
| 109 | S & F in replacement of modular stepped type fan regulator, 120Watts - 2 module complete all as specified and directed. |
| 110 | S & F in replacement of LED Surface track light fitting (min 120 lumen /watt) (bed lamp) Aluminium/PVC/Polycarbonate body complete all as specified and directed. |
| 111 | S&F in replacement of SPN sheet metal enclosure with two-pin and earth plug & socket, 20 Amp, 240 Volts, including MCB SP up to 20 Amp current-carrying capacity, complete with connection, testing and commissioning, after taking out the old unserviceable DBs and making good the disturbed surfaces, all as specified and directed. |
| 112 | S&F in replacement of MCB SPN sheet metal enclosure, single door, DB 4-Way, with 200 Amps rated bus bar for each phase, 240 Volts, complete with DIN rail, neutral bar and earthing bar, including removal of old DBs and making good disturbed surfaces, all as specified and directed. |
| 113 | S&F in replacement of MCB SPN sheet metal enclosure, double door, DB 8-Way, with 200 Amps rated bus bar for each phase, 240 Volts, complete with DIN rail, neutral bar and earthing bar, including removal of old DBs and making good disturbed surfaces, all as specified and directed. |
| 114 | S&F in replacement of MCB SPN sheet metal enclosure, double door, DB 12-Way, with 200 Amps rated bus bar for each phase, 240 Volts, complete with DIN rail, neutral bar and earthing bar, including removal of old DBs and making good disturbed surfaces, all as specified and directed. |
| 115 | S&F in replacement of MCB TPN sheet metal enclosure, double door, DB 4-Way (4+12) with 200 Amps rated bus bar for each phase, 415 Volts, complete with DIN rail, neutral bar and earthing bar, including removal of old DBs and making good disturbed surfaces, all as specified and directe |
| 116 | S&F in replacement of MCB TPN sheet metal enclosure, double door, DB 8-Way (4+24) with 200 Amps rated bus bar for each phase, 415 Volts, complete with DIN rail, neutral bar and earthing bar, including removal of old DBs and making good disturbed surfaces, all as specified and directed. |
| 117 | S&F in replacement of MCB, 415 Volts, 10 kA, “C” curve TPN, 40–100 Amp current-carrying capacity, installed in DB, complete with connection, testing and commissioning, all as specified and directed. |
| 118 | S& F in replacement of 240 Volts, 10 KA, \"C\" curve minature circuit breaker (MCB) of SP upto 32 Amp current carring capacity in the MCB DB complete with the connection testing and commisioning, complete all as specified and as directed. |
| 119 | S& F in replacement of 240 Volts, 10 KA, \"C\" curve minature circuit breaker (MCB) ofSPN 40 to 63 Amp current carring capacity in the MCB DB complete with the connection testing and commisioning, complete all as specified and as directed. |
| 120 | Taking down unserviceable FTL fittings and supplying and fixing in replacement LED light fitting,min efficacy 120Lumen/watt, mirror type, with high output diffuser, 2 feet, 10 watt, 220 V, AC, decorative type with driver, holder and LED lamp, including connecting up with three-core flexible copper conductor cable of suitable size, complete with two Nos PVC box of size 75×75×20 mm for mounting light fittings, complete all as specified and directed.LED light shall have minimum efficiency of 120 lumen/watt. |
| 121 | Taking down unserviceable FTL fittings and supplying and fixing in replacement LED light fitting 1×20W, 4 feet, 220V AC,min efficacy 120Lumen/watt decorative box type with driver and holder, including LED tube light, connecting with three-core flexible copper conductor cable of suitable size from ceiling rose, complete with two Nos PVC box of size 75×75×20 mm for mounting light fittings, complete all as specified and directed.LED tube light shall have minimum efficiency of 120 lumen/watt. |
| 122 | Taking down unserviceable FTL/LED fittings and supplying and fixing in replacement LED luminaire 600 mm × 600 mm, 35/36 watt, 220V AC, surface/recessed type with high-efficiency PMMA diffuser, soft glare-free light, complete with driver, holders and LED lamp suitable for roof ceiling, including connecting up with three-core flexible copper conductor cables of suitable size, complete all as specified and directed.LED luminaire shall have minimum efficiency of 120 lumen/watt. |
| 123 | Taking down unserviceable FTL/LED fittings and supplying and fixing in replacement LED luminaire 300 mm × 300 mm, 18/20 watt, 220V AC, surface/recessed type with high-efficiency PMMA diffuser, soft glare-free light, complete with driver, holders and LED lamp suitable for roof ceiling, including connecting up with three-core flexible copper conductor cables of suitable size, complete all as specified and directed.LED luminaire shall have minimum efficiency of 120 lumen/watt. |
| 124 | M&Lin replacement of sub main wiringin surface/ recessed as site required with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 4.0 sqmm and incl drawn through PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) one run of 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, taking down old submain wiring complete and making good the disturbed surfaces complete all as specified and as directed. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 4 sq mm copper conductor & one run of 4.0 sq mm copper conductor is measured as one unit. |
| 125 | M&Lin replacement of sub main wiringin surface/ recessed as site required with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 6.0 sqmm and incl drawn through PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) one run of 6.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, taking down old submain wiring complete and making good the disturbed surfaces complete all as specified and as directed. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit. |
| 126 | Supply and laying with commissioning and testing XLPE insulated, armoured heavy-duty electric cable with aluminium conductor, 1100 volts grade of size 16 sqmm x 4 core laid in ducts, passing through pipes, fixed on walls complete including connecting properly by means of clamps, thimbles and taking out old unserviceable damaged cable |
| 127 | All as per Item No. 126.00 as in above but of size 25 sqmm x 4 core. |
| 128 | All as per Item No-126.00 here in before but of size 35 sq mm x 4 core |
| 129 | All as per Item No-126.00 here in before but of size 50 sq mm x 3.5 core |
| 130 | All as per Item No-126.00 here in before but of size 70 sq mm x 3.5 core |
| 131 | M&L for painting all exposed surfaces including blades of ceiling fans complete with synthetic enamel paint by spraying, including filling cavities with filler, one coat after scrapping and cleaning all old paint, etc., including writing MES No. and MES in black paint at site complete all as directed by Engineer-in-Charge. |
| 132 | All as per Item No 131.00 above but exhaust fan of size 300/450mm and any Make. |
| 133 | All as per Item No 131.00 above but Pedestal/wall mounting/Air circulator fan fan of any size and Make |
| 134 | Taking down serviceable/unserviceable ceiling fans for day-to-day maintenance from site and overhauling of ceiling fans of any size and make, dismantling parts, properly cleaning/removing old existing grease/oil and applying new oil/grease, varnishing of winding, replacing the unserviceable spare parts complete with re-assembling and connecting copper conductor multi-stranded 3-core wire of size 14/0.0076, and testing after re-fixing at site, complete all as specified and as directed by Engineer-in-Charge.Note:(i) Rate of petty items like hanging clamp set, bottom & top canopy, split pin, bolt & nut, spindle, cover fixing screw and blade fixing screw, down rod shall be included in the above quoted rate.(ii) The spare parts — bush, ball bearing, condenser, fan blade set, bottom/top cover, stator, rotor — shall be measured and paid separately under relevant item. |
| 135 | All as per Item No. 134.00 above but for exhaust fan of size 300/450mm and any make. |
| 136 | All as per Item No. 134.00 above but for Pedestal/Wall mounting/Air circulator fan of any size and make. |
| 137 | Supply and fixing in replacement of bush suitable for Ceiling/Exhaust/Pedestal/Wall mounting/Air circulator fan of any type and size, complete all as specified and as directed. |
| 138 | Supply and fixing in replacement of ball bearing suitable for Ceiling/Exhaust/Pedestal/Wall mounting/Air circulator fan of any type and size, complete all as specified and as directed. |
| 139 | Supply and fixing in replacement of bottom & top cover suitable for ceiling fan 1200mm, any make, complete all as specified and as directed. |
| 140 | Supply and fixing in replacement of ceiling fan blade of size 1200mm, any make, complete all as specified and as directed |
| 141 | Supply and fixing in replacement of ceiling fan stator assembly of size 1200mm, any make, with super enamelled copper wire of same grade/size/gauge, number of turns as per existing, complete all as specified and as directed. |
| 142 | Supply and fixing in replacement ceiling fan rotor assembly of size 1200mm and any makecomplete all as specified and as directed. |
| 143 | Supply and fixing in replacement of capacitor 2.5 MFD, oil-filled metallic body, complete all as specified and directed. |
| 144 | All as per Item No. 143.00, but capacitor 3.15 MFD. |
| 145 | All as per Item No. 143.00, but capacitor 4.0 MFD. |
| 146 | Supply and fixing in replacement of twin-core flexible wire, size 23/.0076, complete all as specified and directed. |
| 147 | Supply and fixing in replacement of exhaust fan blade, size 300/450 mm, any make, complete all as specified and directed. |
| 148 | M&L for Re-winding the damaged burnt winding by taking out from ceiling fan stator assembly of 1200 mm sweep, cleaning the slot and, rewinding with super enamelled copper wire of same grade/size/gauge, no of turns as per existing and duly heating & varnishing including greasing/oiling and commissioning/ testing up to the entire satisfaction of Engr-in-Charge . |
| 149 | All as per Item No. 148.00, but for exhaust fan of 300 mm sweep |
| 150 | All as per Item No. 148.00, but for exhaust fan of 450 mm sweep |
| 151 | All as per Item No. 148.00, but for pedestal / wall-mounting / air-circulator fan of 300/400/450 mm sweep. |
| 152 | Supply and fixing in replacement of plastic ventilation fan, 200 mm (8\") sweep, white colour, energy-saving type, 230 V AC, 50 Hz, complete all as specified and directed. |
| 153 | Supply and fixing replacement of Exhaust fan, steel body AC single phase, 230volts, 50Hz of size 300mm sweep (12\") with blades, frames and louvers including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed. |
| 154 | Supply and fixing replacement of Exhaust fan, Heavy duty, steel body AC single phase, 230volts, 50Hz of size 450mm sweep (18\") with blades, frames and louvers including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed. |
| 155 | Taking down deteriorted louvers and supplying and fix new exhaust fan louvers fixed type of size 300/450mm made out of 1.6mm GI sheet with horizontal ventilation, machine pressed cutting for horizontal ventilation with flat iron base of complete all as specified and directed by Engr-in-Charge |
| 156 | Cutting hole in existing concrete or brick wall suitable for fixing 300/450mm sweep exhaust fan making good the hole including proper internal plaster work and surface finish in side and outside the hole as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 157 | Cutting/drillingin existing RCC ceiling slab surface suitable for fixing with stainless steel super heavy duty\"S\" hookspecially designed to hang ceiling fan safe load pull out load in 75 kgs and jurk/vibration load is 40 kgs, including proper internal and external plaster work and surface finish as per site requirement including taking down old hook complete all as specified and directed by Engr-in-Charge. |
| 158 | M&L for painting all external surfaces of 25/50 litre capacity geysers, using synthetic enamel paint applied by spraying, including surface preparation, filling cavities with filler, scrubbing/cleaning old paint, and writing MES No. and “MES” in black enamel paint at site, complete all as specified and as directed by the Engineer-in-Charge. |
| 159 | S&F in replacement of heating element of 1.5 kW (Triangular/Threaded/Cup type) suitable for 25 litre capacity geysers, complete all as directed at site. |
| 160 | S&F in replacement of indicating lamp, round/flat type as per existing pattern, suitable for 25 litre capacity geysers, complete all as directed at site. |
| 161 | S&F in repair fusible plug for any size of geyser complete all as directed at site. |
| 162 | S&F in replacement of unserviceable thermostat cut-out, adjustable 40–80°C, ISI-marked, suitable for 25 litre capacity geysers, complete all as directed at site. |
| 163 | S&F in replacement of safety/pressure release valve / non-return valve, brass, ISI-marked, best quality, 15 mm size, suitable for 25 litre capacity geysers, complete all as directed at site. |
| 164 | Opening of geysers (25 litre capacity) for examining inner copper shell and repairing leakage by brazing, including testing on completion.Rate includes taking down and refixing the geyser after repair. |
| 165 | S&F in replacement of flexible connection pipe, heavy-duty braided PVC hose, 600 mm long, 15 mm dia, suitable for hot water, with brass union and washer fitted at both ends, suitable for connecting to 15 mm GI pipe line, complete as directed. |
| 166 | S&F in replacement of Brass apparatus plate assembly suitable for 25-litre capacity geysers, complete all as specified and directed at site. |
| 167 | S&F in replacement of rubber ring gasket suitable for apparatus plate assembly of 25-litre capacity geysers, complete all as specified and directed at site. |
| 168 | S&F in replacement of flexible connection pipe, heavy-duty braided hose PVC pipe 450 mm long, 15 mm dia (suitable for hot water), of superior quality as per existing pattern, with brass union and washer fitted at both ends, suitable for 15 mm GI pipe line, complete all as specified and directed.**. |
| 169 | Supply and installation in replacement of LED red obstruction aviation luminaire, 10 Watts, with secondary optics made in pressure die-cast housing and aluminium extrusion heat sink, IP66 protection, complete with base plate, suitable for mounting at rooftop levels. Work includes providing and connecting two runs of 2.5 sqmm PVC insulated, weather-proof, multistranded copper conductor cable, 1100 Volts grade, and testing, complete all as specified and directed. |
| 170 | M&Lfor Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 connected to earthing test point all as specified or indicated including of MES sch pt I testing on completion with & incl. 15 mm bore lightgrade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete all as specified and as directed. |
| 171 | All as per Item No. 170.00 above but using galvanised iron strip 25 × 4 mm as earthing lead in lieu of 4 mm dia wire. |
| 172 | M & L in replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified. |
| 173 | All as per Item No. 172.00 above but using 25 × 4 mm galvanised iron strip as earthing lead. |
| 174 | S&F in repair MCCB four pole, 125 Amps, 16 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs as required. |
| 175 | M&L for sub-main wiring along with earth continuity conductor using PVC insulated FRLS multistranded copper conductor cable (Phase – Red, Neutral – Black, Earth – Green), drawn into and including concealed rigid non-metallic PVC conduit, medium grade, ISI-marked, ivory colour, complete with accessories.Wiring configuration: 2 × 4 Sqmm + 1 × 4 Sqmm (earth) in 20 mm dia conduit, including taking down the old unserviceable wiring complete all as specified and directed. |
| 176 | All as per Item No. 175.00 above but using 2 × 6 Sqmm + 1 × 6 Sqmm (earth) in 20 mm dia conduit. |
| 177 | All as per Item No. 175.00 above but using 2 × 10 Sqmm + 1 × 10 Sqmm (earth) in 25 mm dia conduit. |
| 178 | S&F in repair to rigid non-metallic PVC conduit, medium grade, ISI-marked, ivory colour, 25 mm dia, including all necessary conduit accessories, fixing in wall recess, cutting chases as required and making good the disturbed surfaces to match the existing finish, complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
