|
| 1 | Exacavation in foundation in ordinary soil (loam, clay, sand) including lift up to 1.5m and lead up to 30M and including filling watering and ramming of exacavted earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the engineer in charge up to distance or 30m from the foundation trenches.S.I No |
| 2 | Providing and laying cement concrete in 1:6:12 (1 cement:6 fine sand:12 graded stone agg. 40 mm nominal size) and curing complete including cost of form work in foundation and floors. |
| 3 | Class M-150 brick work in 1:6 cement and C-sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work |
| 4 | Earth filling for Plinth & site development of necessary quantity of earth from a distance not exceeding 2kms from the site of work required for proper completion of work (CARTAGE 2 KM) |
| 5 | CLASS - 150 brick work in 1:4cement and C- sand of 2.25 fineness modulus mortar including supply of all materials,labour and t&p etc. required for proper completion of the work.but in super structure above plinth level up to floor two level(up to two stories) including necessary cutting and moulding of brick work as required |
| 6 | R.C.C. work in 1:1.5:3 cement, coarse sand & 20 mm stone grite including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) |
| 7 | R.C.C. work in slab 1:1.5:3 cement, coarse sand & 20 mm stone grite including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) |
| 8 | Mild steel or iron work in plane work in reinforce concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work and including supply of steel |
| 9 | 12 mm Thick plaster in single coat on fair side of single or half brick wall for plastering including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive (1 cement:4 fine sand) |
| 10 | Distempering two coat with oil bound distempering of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as berger, j&n Shalimar, asian paints afterthoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth surface including cost of all materials. |
| 11 | Laying of interlocking tiles of thickness 80 mm thick I shaped Mechanically Compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressed strength of concrete paver blocks shall not be less than 30mpa & by weight @ 4.5 kg/no. including cost of material, labour, T&P etc required for proper completion of work. |
| 12 | S/ Laying of Vitrified tiles in flooring of 600X600 mm size with water absorption less then 0.08% and conferming to IS 15622 As per SI No Flooring Item no 13 New Item |
| 13 | S/f of stainless steel work for railing |
| 14 | RCC brenches |
| 15 | decorative water fountain fabbara |
| 16 | Submersible pump |
| 17 | S/F singn board |
| 18 | s/f of Stainless steel sink 610x510x200 mm Material Extra Item no 33a |
| 19 | S/F and concealing of 20 mm dia 2 mm thick PVC condiut pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 With all Labour and T&P Etc |
| 20 | Providing & fixing on terrace polyththene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipeps but without fittings and the base support for tank capacity 1000 liters chapter as per Miscellanious item no 2 |
| 21 | Providing and fixing white vitreous china water closet squatting pan(indian type w.c pan) with 100 mm sand cast iron p or s trap,10/ liter low level pvc flushing mm dia c.p flush pipe fitting & clamp, mm overflow pipe with special & masquito proof coupling of approved municipal design,painting wherever required including cutting &making good the wall &floor where required. chapter 24Sanitary Installation Item no 1 Please Enable Macros to View BoQ information |
