|
| 1 | SCHEDULE ‘A’ Part - I (Repair Work ) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Reinforced cement concrete work in beams,lintels, bands above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Providing and laying formwork to sides of concrete including strutting, propping etcand removal of form forLintel Beam etc. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level, in Cement mortar 1:4 (1 cement :4 coarse sand). |
| 7 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).(Internal surfaces of wall). |
| 8 | 20 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand).(External surfaces of wall). |
| 9 | Supply and laying Dry brick pitching half brick thick with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in floor sub base drains including preparing the surface complete. |
| 10 | Providing and laying Vitrified tiles in floor in600 x 600 mm sizes (thickness to be specified by the manufacturer), of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick CM 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. |
| 11 | Providing and laying Vitrified tiles in 800x800 mm sizes (thickness to be specified by manufacturer) of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 12 | Free for fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces. |
| 13 | Finishing walls with Acrylic Smooth exterior paint with silicone additive of required shade on new work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification (Two or more coats on new work). |
| 15 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete. |
| 16 | Providing wood work in frames of doors and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) with Second class teak wood. |
| 17 | Providing and fixing 35 mm thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screwconforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 18 | Providing and fixing 150x10 mm size bright finished brass tower bolts (barrel type) withnecessary screws etc. complete. |
| 19 | Providing and fixing 100mm size bright finished brass handles with screws etc. complete |
| 20 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 21 | Providing and fixing wash basin in built vitreous china pedestal, including cutting and making good the walls wherever require, White Vitreous China Wash basin . |
| 22 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitablebrackets all as per manufacturers specification and direction of Engineer-in-charge |
| 23 | Providing and fixing mirror of superior glass (of approved quality) and of Circcular Typewith plastic moulded frame of approved make and shade with 6 mm thick hard board backing. |
| 24 | Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 75 mm dia. |
| 25 | Providing and fixing 15mm nominal bore C.P. angle stop Cock for basin mixer, flushing cisternand geyser points of approved quality (Make - Hindware, Cat No. F280004). |
| 26 | Providing and fixing stainless steel 600 mm long towel rod with brackets fixed with CP brass screws with concealed fittings arrangement of approved quality and colour (Make - Hindware, Cat No. F580012). |
| 27 | Providing and fixing 15 mm nominal dia CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints in Concealed work etc.complete. |
| 28 | Providing and fixing 25 mm nominal dia CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints for External work etc.complete as per direction of Engineer in Charge. |
| 29 | Free forfixing 40 mm nominal dia CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints for External work etc.complete as per direction of Engineer in Charge. |
| 30 | Providing and fixing stainless steel Pillar Cock Tall (Make - Hindware, Cat No. F360002) . |
| 31 | Supply and fixing of 12 Watt LED Mirror Light fixed to wall , including connection to existing switch board, testing, commissioning etc complete. as required (Make - Havells). |
| 32 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required tank Staging , including use of chequered plate wherever required, all complete |
| 33 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind soil. |
| 34 | Providing and laying in position cement concrete of 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering,All work up to plinth level . |
