|
| 1 | Dismantling,repairing and Re-installation of Modular HDPE cubical units 0.50 x 0.50 x 0.40 mtr fixed in existing jetty at Elephanta Beach by the new fittings,Hand Rain,Pins,fender,etc. excludingcost of any new assosaries/fittings including cost ofall skilled /un skilled labour charges, etc all complete. ( Payment for Required Neww asosaries shall be made separtly ) |
| 2 | Supplying of HDPE cubical (0.50 m X 0.50 m X 0.40 m) by assembling & fixing at shore / workshop including the cost of HDPE cubical, connecting pins & other fittings and fixtures as per the directions of Engineer in charge including all labour charges minor tools required at site etc. (Modular HDPE cubical units,reinforced type or equivalent, weight not less than 8.5 kg/ unit (+/- 5%), Capacity: 360 Kg/sqm, Materials: HDPE lupolen 5261Z or equivalent MFR grade, Dimensions: 0.50m X 0.50m X 0.40m, Top cover thickness of 15mm to ensure sufficient protection, top cover should be fitted inside the cervix of the module to ensure sufficient protection of the cover, lug thickness of 22 mm, side surface to be 3 dimensional male female interlocking system cost of units including cost of all taxes and other liabilities as per the rates in force by assembling & fixing at Shore/workshops including the cost of HDPE cubical, connecting pins, minor tools & plants, labour charges, incidental charges etc all complete as per the direction of Engineer-in-charge (Note: 1. OEM Authority Certificate should be submitted along with technical bid2. Test certificate of Melt Flow Rate (MFR) of Raw material should be submitted showing MFR value less than 3 g /10 min at 21.6 kg weight and 190°C from CIPET India or any reputed research centers which are accepted internationally |
| 3 | Supplying of materials and accessories required for assembling and fixing of floating jetty and hand rails etc upto inlcuding transportation upto work site of Elephanta Beach, Swaraj Dweep |
| 4 | Side fixation unit with nut SA 402 [Material should be made from virgin density polyethylene weight not less than 0.90 kg used for double layer floating soulation] |
| 5 | Short connecting pin SA 202 [Material should be made from virgin density polyethylene weight not less than 0.90kg used for double layer floating soulation] |
| 6 | D Shackle GI 20mm 4T on capacity |
| 7 | PP Rope 20mm dia |
| 8 | Anchor chain [GI] 16mm |
| 9 | Boat cleat with nut Stainless Steel Grade - 316 or Equivelent, weight not less than 1.00 kg used for mooring the vessel less than lemgth of 88 feet |
| 10 | Stainless Steel belaying pin, Single type, [SS Gr-316 Mrine Grade Single type for mooring vessels less than 65 feet length or 35 Tonnage |
| 11 | PE Fender HDPE weight not less than 2.65 kg |
| 12 | Providing RCC 1:1.5:3 precast anchors blocks/anchors of size 0.50 x 0.50 x 0.25M cast with (1 cement, 1.5 Pulverised Stone Sand & 3 Stone Chips 20mm nominal size) including cost of cement (OPC Gr-43 IS 8112:1989), pulverised stone sand and stone chips from the approved quarry , screening and washing of both the aggregates, mixing of concrete, conveying and placing the same, consolidation and curing, cost of steel reinforcement (10mm dia @ 150mm c/c top,middle & bottom), cost of centering and shuttering, cost of all other materials, removal of form work, lifting and stacking the anchor blocks, cost of all labour charges, cost of minor tools etc., complete. |
| 13 | Supplying and fixing of stainless steel of 316 grade hand rails made with 3mm thick SS pipe 40mm dia, SS base plate 10mm thick, and 6mm thickness with stiffener, 16mm SS bolt, 3\" length full threaded with SS nut, SS plate washer 3mm thickness and 9cm dia.(1. Size- width 130cm, height-120cm including bolt, 2. Stainless steel welding to be carried out, 3. Staineless steel should be of 304 grade), includingtransportationinstallation of the same on the Floating Jetty,etc.all complete. as aproved by E-in-C |
| 14 | Providing manpower for fixing of fenders and other accessories as per direction of Engineer-in-charges |
| 15 | Divers (High skilled) |
| 16 | Semi skilled labour including watch and ward |
