|
| 1 | Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed. |
| 2 | M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. |
| 3 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed. |
| 4 | Supply only Liquid water proofing compound ISI Marked complete all as specified as directed. |
| 5 | M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement in RCC ceiling complete all as specified as directed. |
| 6 | M & L preparation new plastered surfaces of any description , including cornices and applying three coats of whitewash on ceiling complete all as specified and as directed. |
| 7 | M&L for preparation ofnew plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of white cement primercomplete all as specified as directed. |
| 8 | M&L for preparation ofnew plaster surfaces of wall and applying two coats of cement base paintover a coat of white cement primer complete all as specified as directed. |
| 9 | M&L for providing and applying minimum 1mm thick wall careputty over prepared surface to achive the surface even and smooth for painting. complete all as specified and as directed with necessary scaffolding |
| 10 | M&L for preparation of old distempered and painted surfaces of wall and applying two coats of Oil Bound Distemper with rollercomplete all as specified and as directed with necessary use and waste of form work complete. |
| 11 | M&L for complete removal of existing treatment,by scrapping existing painted surfaces of wall and applying two coats of cement base paint over a coat white cement primer for smooth surface complete all as specified and as directed.Note :- Cost of scaffolding and its removal is deemed to be included in unit rate quoted. |
| 12 | M&L for preparation of old plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10+E35 sqm over new surfaces. complete all as specified and directed. |
| 13 | M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 14 | M&Lpreparation ofold painted steel surfaces of any description,over 10cm width or girth and apply one coat of synthetic enamel paintcomplete all as specified and as directed . |
| 15 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white basesynthetic enamel paint,all as directed. |
| 16 | M&L for Removing /cutting trees vegetation, digging out roots from concrete or brick wall filling the holes on buildingwall/roof/cajja/water tank staging area with PCC 1:2:4 etc and making good with cement mortar 1:4 complete. |
| 17 | M&L for preparation of old surfaces of wall and applying one coats of oil bound distemper with roller complete all as specified as directed with necessary scaffolding. |
| 18 | M&L for preparation of old surfaces of wall and applying one coats of cement base paint complete all as specified as directed.Note :- Cost of scaffolding and its removal is deemed to be included in unit rate quoted. |
| 19 | M&L for preparation of old surfaces of walls and applying two coats of white wash complete all as specified as directed with necessary scaffolding. |
| 20 | M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified as directed with necessary scaffolding. |
| 21 | Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 22 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm and n.exc 4 sqm each and removing from site complete all as specified and directed. |
| 23 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed. |
| 24 | Taking down and Refixing in same opening or easing & adjustingshutters of any description n.exc 1 sq.m each complete all as specified and directed. |
| 25 | Taking down and Refixing in same opening or easing & adjustingshutters of any description exc 1 sq.m &n.exc 2sq.m each complete all as specified and directed. |
| 26 | S&F 2nd class HW plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 27 | S&F factory made pressed steel frames section 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 28 | S&F factory made pressed steel frames section 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 29 | M&L for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed. |
| 30 | S&F factory made 35mm thick 2nd class HW glazed skeleton shutters open rebated and preparedto receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed. |
| 31 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 32 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 33 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 34 | S&F Solid PVC Wall panelling & lining consisting of 5mm thickprinted PVC sheet inclusive of solvent cement and fixing at site complete all as specified and directed. |
| 35 | M&L for Anodised aluminium snap grid frame work for false ceiling, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified. |
| 36 | M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework fixed in ceiling flat or sloping complete all as specified . |
| 37 | S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed. |
| 38 | S&F factory made solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC \"C\" channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specificationcomplete all as specified and directed. |
| 39 | S&F butt hinges medium weight cold rolled mild steel 100mmcomplete all as specified and directed. |
| 40 | S&F in repair butt hinges medium weight cold rolled mild steel 100mmcomplete all as specified and directed. |
| 41 | S&F 125mm aluminium anodised of extruded section barrel tower boltscomplete all as specified and directed. |
| 42 | S&F in repair 125mm aluminium anodised of extruded section barrel tower boltscomplete all as specified and directed. |
| 43 | S&F 150mm long alumiunium handles cast type anodisedcomplete all as specified and directed. |
| 44 | S&F in repairs 150mm long alumiunium handles cast type anodisedcomplete all as specified and directed. |
| 45 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 46 | S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 47 | S&F floor door stopper of aluminium alloybody and tongue with hard drawn steel springwith 140mm overall length of cover platecomplete all as specified and directed. |
| 48 | S&F mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller platecomplete all as specified and directed. |
| 49 | M&L in repair powder coated aluminium (sliding/ hangingtype) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grillwith all fittings & fixture complete all as specified and directed . |
| 50 | S&F in repairs mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller platecomplete all as specified and directed. |
| 51 | S&F in repairs door seal brush to provide safety from snakes/incestscomplete all as specified and directed. |
| 52 | M&L for preparation of new painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 53 | S&F in repair stainless steel harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers but of anodised aluminium alloy etc complete al as specified and directed. |
| 54 | Hacking out old broken glasses any thickness size, quality or description from metalframes including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg hight complete all as specified and as directed. |
| 55 | M&L for 5.5mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 56 | M&L for 3mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 57 | M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed. |
| 58 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all specified and as directed. |
| 59 | S&F in repairs Steel rolling shutters, 1.25 mm thickness of laths, with outball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete: push pull or manual type complet all as specified and directed. |
| 60 | M&L in repairspowder coated aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50mm and bottom rail150.00X 44.50 X 2.50mm andstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mmincl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed. |
| 61 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 62 | S&F in repairsDoor closer hydraulically regulated, designation No.3, universal type, Aluminium (extruded section body) suitable for door shutters fixed complete all as specified and directed. |
| 63 | S&F in repairs15 mm bore bib tap chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairsall as specified and directed. |
| 64 | S&F in repairs15 mm bore Bib tap standard of PTMT fancy type any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms) complete all as specified and directed by Engr in Charge. |
| 65 | S&F in repairs15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. |
| 66 | S&F in repairs15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed. |
| 67 | S&F in repairs15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and directed. |
| 68 | S&F in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and CP wall hook including making connections and fixed in position complete in all respect as specified. |
| 69 | S&F in repair angle valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 70 | S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 71 | S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union fixed to pipe all as specified and directed. |
| 72 | S&F in repair vitreous china ware wash hand basin 550mmx 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracketand making good all connections. |
| 73 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or strap ,seat cover , including connection to trap /drainand to flushingpipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed. |
| 74 | S&F in repair vitreous chinasquating pan orissa pattern size 580X 440mmwhite with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed. |
| 75 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete all as specified and directed. |
| 76 | S&F in repairs 15 mm bore PVC connection600 mm long withbrass nuts and washers on both ends all asin repairs specified and directed. |
| 77 | S&F in repairsstainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on todwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160mm complete all as directed . |
| 78 | S&F in repair 15 mm dia Brass CP wall mixer, sink mixer, WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specifies and directed. |
| 79 | S&F in repair Soap dish, chromium plated, fancy type aprroximate size 160x 160x90mm complete all as specified and as directed. |
| 80 | S&F rotational moulded polethylene three layered water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoistedand fixed in position all as pacific SSR Part- I including dismantling ofexisting water tanks capacityn exc 1000 ltr complete all as specified and directed. |
| 81 | S&F rotational moulded polethylene three layered water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacityn exc 500 ltr complete all as specified and directed. |
| 82 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to . |
| 83 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. |
| 84 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to . |
| 85 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. |
| 86 | S & Fin repair 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 87 | Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exc 250 and n exc 500 ltr capacity (date of cleaning to be mentioned on PVC tank) complete all as specified and directed. |
| 88 | Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exc 500 and n exc1000 ltr capacity (date of cleaning to be mentioned on PVC tank) complete all as specified and directed. |
| 89 | S&F in repair CP Grating 100mm dia complete all as specified and as directed. |
| 90 | Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and directed by Engineer in Charge.Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one, to make the joinery work functional shall be measured and paid for separately as Supply and \"S&F\" under respective item of this schedule. Old retrieved item(s) as considered in \"Schedule of Credit\" shall become property of the contractor. 1. Rate shall be quoted accordingly against these items, keeping in mind above said provisions.2. The comlaint shall be attended by the contractor within 12 hours, failing which a panel recovery of Rs 200/ complaint shall be recovered from the contractor dues and no dispute will be intertained at later date. |
| 91 | Attending complaint of petty repair of leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pllar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water supply Repair to leaking flushing cistern low/high level, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water supply available upto water taps incl attending the complaints of no water supply.repair to PVC bend, pipe etc . ( Rates are deems to be including replacement washers (hot/cold) ,, flush pipe,GI Nipple,union,Socket,Reducer Socket,bend,Elbow,Reducer Elbow ,Tee,brass spindle, flush syphon, flush handle, pata screwsetc) complete all as specified.Notes:-1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 1.. Rate shall be quoted accordingly, keeping in mind above said provisions.2. The complaint shall be attended by the contractor within 12 hours from the lodge of complaint, failing which a panel recovery 200/ complaint shall be recovered from the contractors dues. |
| 92 | S&F in repairs water tank covers of capacity up to 1000 ltrs complete all as specied and directed. |
| 93 | S&Fin repair transparent PVC waste pipe 32/40mm dia for wash basin/sink/urinal complete all as specied and directed. |
| 94 | Welding in repairs including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges n. exc 25 mm in length, as required complete all as specified and directed. |
| 95 | S&F repair plastic water closet seat cover for pedestal or semi pedestal pattern, white closed pattern with flat botom with PVC nuts and screws complete all as specied and directed. |
| 96 | S&F in repair stainless steel plate rack of minium size 970X770X230mm of standard quality, fixed to wall with wooden gutties and screws, complet all as specified and directed. |
| 97 | S&F in repair prelaminated particle board, 18/19 mm exterior grade and bonded with phynolmormeldehyde resin, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 98 | S&F in repairs Waste coupling for sink, WHB 32/40mm dia chromium plated complete all as specified and directed. |
| 99 | S&Fin repairs aluminium ( Die cast ) body door closer hydraclically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width andofweight between 36 to 60 kg and. complete all as specified and as directed. |
| 100 | S&F in repairs steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded. |
| 101 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises . |
| 102 | Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 103 | M&L for roof treatment using following procedure- (A) Cleaning of roof surfaces using wire brush and remove all the dust, algae,fungus and deposited material and scouring with water and remove the scrapped material out of MOD land. (B) Applying cement slurry @ 3 kg/sqm over the cured surfaces uniformly. (C) Apply 20 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate to maintain the slope and filled the uneven surface. (D) Applying chicken wire mesh made out of GI wire with mesh size 20x20 mm and fixed over PCC with nails and tined foxes complete. (E) Apply PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate over wire mesh by applying liquid WPC as per manufacturer instructions and cured properly by ponding over rrof atleast for 7 days. completeall as specified and directed. |
| 104 | M&L for PCC 40 mm thick 1:2:4 type B-1(20mm graded stone agg) as in flooring finishing even & smooth with using extra cement etc complete all as specified as directed. |
| 105 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 106 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 107 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 108 | M&L for double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 109 | Repair/easing/ readjusting of aluminium door/window shutters by taking down shutters from frame and dismentling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same includingrubber gasket ,hinges , handle, screws etc complete all as specified and directed. |
| 110 | S& F in repairaluminum glazing clips / beading for aluminum door and window complete all as specified and directed by Engr in Charge. |
| 111 | S& F in repairrubber gasket for packing /beading for aluminum door and window complete all as specified and directed by Engr in Charge. |
