|
| 1 | Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame). Complete all as specified and as directed. |
| 2 | Taking down chowkat or frames not exc 1.5 sqm each with shutter (without taking off shutters from the frame). Complete all as specified and as directed. |
| 3 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.Complete all as specified and as directed. |
| 4 | Demolition of Brickworkmasonry, built in cement mortar at ordered portions including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. Complete all as specified and as directed. |
| 5 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6). Complete all as specified and as directed. |
| 6 | M&L Rendering 15mm thick on fair faces of brick work or concrete sur faces in CM 1:4, finished even and smooth without using extra cement. Complete all as specified and as directed. |
| 7 | M&L Rendering 10mm thick in cement mortar 1:3 finished even and fair on vertical surfaces on walls for fixing of dado / skirting tiles. Complete all as specified and as directed. |
| 8 | M&L screed or bedding layer 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed. |
| 9 | M&L Light Shade Virified Ceramic tiles 10 (+/- 1) mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed. |
| 10 | M&L Light Shade Virified Ceramic tiles 10 (+/- 1) mm thick (square/ rectangular) polished, area of each not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed. |
| 11 | M&L rendering 20 mm thick (8 mm top coat mixed with WPC over 12 mm backing coat)on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction complete all as specified and as directed.Note:- Liquid water proofing comound shall be measured & paid separately |
| 12 | M&L Rendering 10 mm thick on fair faces of brick work or concrete sur faces in CM 1:6, finished even and smooth without using extra cement.Complete all as specified and as directed. |
| 13 | M&L preparation of newly plastered surfaces of walls and applying two coats of acrylic emulsion distemper over a coat of alkaline resistant primer and 1.5mm thick wall care putty.Complete all as specified and as directed |
| 14 | M&L complete removal of existing treatment on surfaces of walls and applying two coats ofacrylic emulsion distemper over a coat of alkaline resistant primer and 1.5mm thick wall care putty complete all as specified and as directed |
| 15 | M&L applying two coat of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approve by GE) over and including a coat of weather proof wall primer to new plastered of wall (including chajja, facia & ceiling surface) including preparation of surface of any height including all necessary scaffolding complete all as specified and as directed. |
| 16 | Dismanting of wrought iron or mild steel work af any description not otherwise provided for complete all as specified and as directed by Engineer-in-charge |
| 17 | S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde E-250 Quality A). Complete all as specified and as directed. |
| 18 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410W Gde E-250 Quality \"A\".Complete all as specified and as directed. |
| 19 | M&L preparation of new steel surfaces over 10cm width / girth and applying two coat of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer surface of any height including all necessary scaffolding complete all as specified and as directed. |
| 20 | S&F Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and includes frame. Net opening will be measured for payment purpose.) |
| 21 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 22 | S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.Complete all as specified and as directed. |
| 23 | S&F Anodised aluminium snap grid frame work size of grid 605x605 mm for false ceiling.Complete all as specified and as directed. |
| 24 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long.Complete all as specified and as directed. |
| 25 | M&L 4mm thick non asbestos fibre cement building boards fixed or laid / inserted to aluminium frame work as in ceiling (Designer type). Complete all as specified and as directed. |
| 26 | S&F Sheet glass 4.8 mm thick, tinted type, ordinary quality & glazing with oil putty in squareexc 0.5 sq.m in each pane. Complete all as specified and as directed. |
| 27 | S&F Two shutter sliding windows made of galvanized steel (base steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM) using factory made section powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for sliding shutter section, the outer frame for two tracks with grill provision size of 90 mm x 50 mm and the window shutter section of 58 mm x 36 mm and the outer frame with two integrated guide tracks of 12 mm width and 24 mm deep for provision to slide the shutter / sash frame and facilitates with a water drain outlest component made of PVC and the shutter frame fitted with 5 mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window system at site using anchor fasteners, inclusive of conveyance of all materials and accessories, labour charges and erection at site with complete finished item of work. including 10 mm square bars with 150 mm pitch complete all as specified and directed. Make: Elixir (2-Track Sliding Window with Grill Provision) / equivalent of Tata Pravesh. |
| 28 | S&F Steel Door with Frame Double Leaf, RAL finished Plain Steel Door 1500mm x 2100 mm with the following specifications: Frame profile 100 mm x 58 mm along with 1.2 mm sheet thiclness which is infilled with PUF Shutter thickness 46 mm, shutter sheet 0.80 mm (both side) infill with honeycomb Accessories included - Mortise lock 1No, SS Hinges 8 Nos, Tower Bolt 1 No, Door Stopper 2 No and D Handle 01 Pair.Complete all as specified and as directed. |
| 29 | S&F Steel Glazed Door with single shutter of wall opening size 1.20 m x 2.10 m with single rebate frame of 100 mm x 58 mm, shutter thickness 46 mm made of 0.80 mm sandwich panels filled with PUF fillers, frame made of 1.20 mm with honeycomb filling, with a glass opening of size 600 mm x 1500 mm fixed with 8 mm thick toughened glass, The frame and shutter finished with powder coating of approved RAL shadewith following accessories.Hinges - 98751006 - 4 Pcs Per Shutter of Make Geze, Door Closer - 1110002 - 1 Pc Per Shutter of Make Geze, H Handle - 8163193 - 2 Pc Per Shutter of Make Geze, Dead Lock - 9000808 - 1 Pc Per Door of Make Geze (One side key one side knob), Door Stopper - 98347327 - 1 Pc Per Shutter of Make Geze. Inclusive of all taxes, transportation and fixing charges |
| 30 | S&F Steel Door with single shutter of wall opening size 1.20 m x 2.10 m with single rebate frame of 100 mm x 58 mm, shutter thickness 46 mm made of 0.80 mm sandwich panels filled with rock wool fillers, frame made of 1.20 mm with rock wool filling. The frame and shutter finished with powder coating of approved RAL shadewith following accessories.Hinges - 98751006 - 4 Pcs Per Shutter of Make Geze, Door Closer - 1110002 - 1 Pc Per Shutter of Make Geze, H Handle - 8163193 - 2 Pc Per Shutter of Make Geze, Dead Lock - 9000808 - 1 Pc Per Door of Make Geze (One side key one side knob), Door Stopper - 98347327 - 1 Pc Per Shutter of Make Geze. Inclusive of all taxes, transportation and fixing charges |
| 31 | S&F Steel Door with single shutter of wall opening size 1.00 m x 2.10 m with single rebate frame of 100 mm x 58 mm, shutter thickness 46 mm made of 0.80 mm sandwich panels filled with rock wool fillers, frame made of 1.20 mm with rock wool filling. The frame and shutter finished with powder coating of approved RAL shadewith following accessories.Hinges - 98751006 - 4 Pcs Per Shutter of Make Geze, Door Closer - 1110002 - 1 Pc Per Shutter of Make Geze, H Handle - 8163193 - 2 Pc Per Shutter of Make Geze, Dead Lock - 9000808 - 1 Pc Per Door of Make Geze (One side key one side knob), Door Stopper - 98347327 - 1 Pc Per Shutter of Make Geze. Inclusive of all taxes, transportation and fixing charges |
| 32 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.Complete all as specified and as directed. |
| 33 | M&L preparation of old treated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed |
| 34 | S&F Roled mild steel as in Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 W Grade E-250 Quality A.Complete all as specified and as directed. |
| 35 | S&F rolled mild steel work confriming to Fe490 Gde E-250 Quality A as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Complete all as specified and as directed. |
| 36 | Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /lose soil.Complete all as specified and as directed. |
| 37 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and as directed |
| 38 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point (soil). Complete all as specified and as directed. |
| 39 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (broken stone/boulders).Complete all as specified and as directed. |
| 40 | M&L 75 mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregates as in Cement concrete in floors, sub-floors, sub-bases etc complete all as specified and as directed |
| 41 | M&L 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate), as in plinth protection etc , finished even and smooth w/o using extra cement.Complete all as specified and as directed. |
| 42 | M&L Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match 1:2:4 type B1 using 20mm graded stone aggregates.Complete all as specified and as directed. |
| 43 | Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green.Complete all as specified and as directed. |
| 44 | Forming Dummy Joints/Contraction Joints with an initial saw cutting of 3mm soon after the concrete has set, upto a depth of 1/3rd to 1/4th the thickness of the slab, widening the first saw cut to 6 mm and 24mm deep by using diamond bit cutter of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air, joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant. Placing of closed cell, medium density, crossed linked polyethylene foam backup rod of 8mm dia, application of bond breaker tape on top of backup rod for complete width of the joint and filled with polyurethane based sealant complying with BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of +/- 30% having minimum 10 year performance guarantee. applying masked tape on the edges of joints and removing the masking tape after filling sealant as per the method specified by the manufacturer complete as specified and as directed |
| 45 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.Complete all as specified and as directed. |
| 46 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link).Complete all as specified and as directed. |
| 47 | All as per Item No 46.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 48 | S&F Ball bearing (including application of grease) to allow for rotational movement of metal rod (as provided in Item No. 12) complete all as specified and as directed |
| 49 | M&L point wiring for One light/Fan point controlled by one way switch 5/6 amps with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed FRLS cable ,single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC medium grade casing caping (Double lock pattern) and accessories (ISI Marked) on walls/other surface etc incl provn of1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable FRLS as earth continuity conductor (green in colour) & PVC switch box heavy duty of appropriate size on wall/other surface (ISI Marked) for housing switches/socket outlet, Fan regulators etc.Complete all as specified and as directed. |
| 50 | All as per item No 49.00 above but One socket out let 5/6 amps point on the independent board |
| 51 | All as per item No 49.00 above but wiring with 2.5 sq mm single coremultistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed |
| 52 | S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 53 | S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 54 | S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed. |
| 55 | S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed. |
| 56 | S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 57 | S&F White cover plate with frame, 3 module complete all as specified and directed. |
| 58 | S&F White cover plate with frame, 6 module complete all as specified and directed. |
| 59 | S&F Metal flush box 3 module complete all as specified and directed. |
| 60 | S&F Metal flush box 6 module complete all as specified and directed. |
| 61 | S&F Recess mounting flat panel 34 Watt LED fitting (2\"X2\") for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection complete all as directed by Engineer-in-charge. |
| 62 | S&F Wall fan 400mm sweep BLDC , silent smooth and energy efficient , single phase, 230V, 50 Hz with remote control complete all as specified and directed. |
| 63 | S&F of ceiling fan with all accessories 230 volts 1200 mm sweep BEE 5 Star Ratedconforming to IS-374 :1979 completepre-wired with three core cable all as specified and directed by engr-in-charge. |
| 64 | S&F of industrial Wallfan heavy duty with all accessories 230 volts 750 mm sweep , single phase, 50 Hz completepre-wired with three core cable all as specified and directed by engr-in-charge. |
| 65 | S&F for Sub main wiringwith two run of single core (1 phase) PVC insulated unsheathed cable 1100 volts grade, 1.5 Sqmm size with multistranded copper conductor, FRLSH cable drawn in with andincluding PVC casing capping not less than 25 mm ISI marked includingall accessories ofcasing caping including one run ofPVC insulated unsheathed 1.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed by EIC. (2 x 1.5 sqmm + 1 x 1.5 Sqmm earth wire).Complete all as specified and as directed. |
| 66 | All as per item No 65.00 above but wiring with 6.0 sq mm |
| 67 | All as per item No 65.00 above but wiring with 4.0 sq mm |
| 68 | S&F of Sheet metal enclosures with socket two pin and earth plug top and MCB SP-20 Amp 230 volt complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed. |
| 70 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB\"S/lsolators with complete all as specified and directed. |
| 71 | S&F MCB, Triple pole & neutral 63 amps, 415 volts, ‘C’ curve, 10KAcomplete all as specified and as directed. |
| 72 | S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA allcomplete with and including taking down old unsv one as specified and as directed. |
| 73 | S&F MCB, Single pole, 5 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete all as specified and as directed. |
| 74 | S&F of LED floodlight epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 10000 lumen, system wattage 100 Watt, Ingress protection IP-66 with all acessoriescompleteany type from any hight complete all as specified and directed.all as specified and directed. |
| 75 | M&L Flexible PVC insulatedmulticore FR PVC sheathed multistrandedcopper conductor cable of 2.5 Sqmm x 3 corefor voltage grade up to 1100 V conforming to IS 694 : 2010for connection oflight fittingfrom junction box orfrom over head conductorsto fitting complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Supply , Installation , commissioning and testing Flame proof split AC 2.0 TR, 230 V AC , 50 Hz , single phase , IP 66CIMFR certified ,PESO (Nagpur) with outdoor unit comprising of emerson make hermitically sealed compressorwith flame proof terminal box, suitable for R407C CFC free environment free and non-flammable refrigerant gas and indoor unit copper tube to be fixed on iron staging comprising of cooling motor , copper condensing coil with aluminium blue fins duly coated with specialist chemicalto prevent refrigerant leakage and flame proof control panel comprising of lamps 230 V AC -05 Nos with temp indicator , 2 relay output, MCB , contactor & overload relay for protection of compressor and condensing motor and incommer MCB of suitable rating complete all as specified and as directed by Engineer-in-charge. Note : (i) Flame proof control panel and power cable of suitable size and core as per OEM recommendation shall be included in the unit quoted rate .(ii) Copper tubes ( of size 3/8 & 5/5 or as required at site ) along with wrapping insulation tape and drain pipe of suitable dia of required length and drilling /chasing of existing wallsshall also be incl in the item qouted rate .Tenderer\"s are advised to keep this aspect while quoting the rate .(iii) For fixing indoor unit and outdoor unit ,Iron stagging of standard sizeshall be as per manufacturer recommendation and the same shall deemed to be included in the unit quoted rate . |
| 77 | S&F Flame proof Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 230 V with accuracy of ± 2.5% or as per latest manufacturer recommendation and of capacity 5 KVA with all accessories complete all as specified and directed by Engr -in-charge |
| 78 | Supply and install hi wall split units indoor/outdoor complete (Inverter type) with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum5 star rating and EER 3.2.of capacity minimum 1.5 TR complete with all fixing arrangement on wall /floor including refrirerant line from outdoor unit to indoor unit as required at site with out any extra cost. Make : Daikin/O-General/ Voltas/ Hitachi/LG/Blue Star/ Havells (LLYOD) |
| 79 | Supply and fix Voltage stabilizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 230 V with accuracy of ±2.5% or as per latest manufacturer recommendation and of capacity 5KVA with all accessories complete all as specified and directed by Engr-in-charge . |
