|
| 1 | Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge. |
| 2 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 3 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorbtion less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigements etc. complete. Size of tile 600x600mm |
| 5 | Supply and fixing of anodized aluminium partition/ aluminium door having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and 11.40x44.45 as bottom and horizontal member with all fitting, glass panes of 4mm thick handle and locks complete. |
| 6 | Providing and fixing wall lining flat pressed three layer (medium density) pariicle board or grade wood pre laminatedone side decorative grade 1, Type ii IS 12823 marked including priming of unexposed arragement and srews etc complete 25 mm thick |
| 7 | Supply and fixing of float glass panes of nominal thickness of 5mm (weight not less than 12.50 Kg/Sqm) |
| 8 | Wiring point for light with 1.5sq mm FR PVC insulated single core aluminium conductor cable im heavy cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 8 SWAG GI earth continuity wire piono type switch & cealing rose/angle/batten holder on 3mm thick pheolic laminated baklite sheet etc, complete in all respect as directed including matching colour wash, |
| 9 | Wiring point for light with 1.5sq mm FR PVC insulated single core aluminium conductor cable im heavy cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 8 SWAG GI earth continuity wire piono type switch & cealing rose/angle/batten holder on 3mm thick pheolic laminated baklite sheet etc, complete in all respect as directed including matching colour wash, |
| 10 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser ofSpecial Polycarbonate meterial and driver set complete in all respect.CAT-AAA PWD Schedule Item No.1406 |
| 11 | Supply and fitting of ceiling fan Usha, Khetan, Bajaj I.S.I mark including all complete. |
| 12 | Supply and fixing of electronic fan regulator( Modular) 120-280 V |
| 13 | Supply and fixing of switch box 250 x 250 x 65 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet |
| 14 | supply of 2.00 ton capacity window type air conditioner confirming to IS specification suitable for operation on 230V, 50 Hz singlr phase, AC supply with all accessories. |
| 15 | Supply installation testing & commissioning of Voltage Stablizer 5.00 Kva For 2.0 Tr Air Conditioner. |
| 16 | Supply of Revolving chair |
| 17 | Supply of visitor chair |
| 18 | Supply of Almirah full size. |
| 19 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
