Name of Work:- Xzke Jgsmh Ls Xzke Ttusj Ds E/; Fdeh0 1 Esa Flfkr Fg.Mu Unh Ij Lsrq ¼Lsrq La0 1@1½ Dh Ejeer Dk Dk;Za
Sl. No.
Item Description
1
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
2
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification
3
Providing and laying boulder pitching for bed protection with stone boulders of minimum size and weight (25kg) laid dry complete as per drawing and technical specification (MORD 1300)
4
Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification
5
Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy
6
Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.
7
Applying epoxy mortar over leached, honey combed and spalled concrete surface and exposed steel reinforcement complete as per technical specification.
8
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR No. 13.62.1)
9
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3
10
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR No. 4.1.8)
11
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR No. 6.4.1)
12
12 mm cement plaster: (1 cement : 4 fine sand) complete as per direction of Engineer Incharge (DSR No. 13.1.1)
13
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR. No. 4.1.3) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
