|
| 1 | Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm CM 1:6and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.Make-JKCement/Birla/Ultratech. |
| 2 | Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm CM 1:4and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.Make-JKCement/Birla/Ultratech. |
| 3 | Repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in CM 1:3 on ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.Make-JKCement/Birla/Ultratech. |
| 4 | M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel barincluding plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka.Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying 25mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand)using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note:-(i)After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii)Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in 1:4(iii)Work to be carried out as in patches as directed by Engr-in-charge.(iv)Rate for steel scaffolding as directed to be included in quoted rate.(v) All demolished material removed from MOD land completely. |
| 5 | M&L for Preparation of newor previously undercoated surface of ceiling and applying twocoats of white wash on ceiling all as specified and directed. |
| 6 | Prepration of newsurface of wall and applying two coats of cement based paintwhite or tinted complete all as specified. |
| 7 | M&L Prepration new plastered surfaces and applying two coat of white wash on ceiling all as specified. |
| 8 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but n.exc 4 sqm each all as specified. |
| 9 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area n.exc 1.5 Sqm each all as specified. |
| 10 | S&F 15 mm bore GItubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking downMake: Jindal/TATA. |
| 11 | S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking downMake: Jindal/TATA. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed |
| 13 | M&L Glazed ceramic tiles (coloured) in vertical surfaces 250x375x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 14 | M&LforNon - skid Ceramic colouredtiles 7 to 8 mm thick (square/ rectangular) area of eachtileexceeding 0.11 sqm but notexceeding 0.18 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 15 | S&FsolidPVC door frameof size 50x47mmmade out of 5mm thickplain colour PVC sheet reinforcedwith MS Squaretube etc all as specified and directed. Make: Rajshree/Sintex |
| 16 | S&Ffactory made solidpanelPVC door moulded shutter30mm thick (style) consisting frame made outof MS tubefortop andbottom rail MS frame shall becovered with heat mould plaint colourPVC C channel havinga PVC sheet strip of 20mmwidthstuck inside withsolventcement forstyle and plain colour PVC sheetfor top rail lock andbottomrail on either sideand as gap insert for top railand bottom railplain colour PVCsheet tape fixed inMS frame welding sealed to the styleand rail withsuitablePVC sheet bearing andjointingtogether withsolvent cement etc all as specifiedMake : Rajshree/Sintex |
| 17 | S&F 65x100 mm single rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed.Make: Rajshree/Sintex |
| 18 | S&FFactorymade 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side prelam14 micron Flushdoor shutter wit 10mm deep CNC moulding design ofrequiredsize comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 19 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 20 | S&F 4.8mm thicksheet glass ordinary quality and glazing with oil putty/Aluminium beadsin squareexc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfacesground or obsecured to one sidecomplete all as specified. Make : Modiguard/Saint Gobin/Atul |
| 21 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 22 | S&F 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts all as specified |
| 23 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. |
| 24 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed. |
| 25 | S&F 125 mm size aluminium alloy handles fabricated type extruded section ,ISI marked all as specified |
| 26 | S&F 150 mm size aluminium alloy handles fabricated type extruded section ,ISI marked all as specified |
| 27 | S&F Butt hinges 125 mmstainlesssteel hinges medium weight and fixed |
| 28 | S&F Butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 and fixed to PVC frame |
| 29 | S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ).and trap including connection to drain (or outgoing pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs.Make :Cera/Periware/Hindware |
| 30 | S&F Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed. |
| 31 | S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete including provision of lime concrete bedding. |
| 32 | S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made Make :Parry ware/Slimline/ Cera |
| 33 | Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar |
| 34 | M&L, 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite completeall as specified. |
| 35 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 36 | S&F for Vitreous china (Counter type)WHB White (C, size 445x445x130 mm with waste coupling waste pipe of 32mm dia all as specified and directed. |
| 37 | M&L forVitreous China urinals half stall, pedstalltype (Size 310x300x555 mm)complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe (Make Cera Cat No 54020114) |
| 38 | M&L brick work with sub class B bricks, straight or curved on planexceeding 6 mtr mean radius , built in cement mortar 1:6 |
| 39 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories |
| 40 | S&F in repair110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall including down all as specified and directed. |
| 41 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall all as specified and directed by Engineer-in-charge. |
| 42 | S&F 110mm PVC (SWR) junctionsingle (single T)equal or unequal |
| 43 | S&F 110mm bore PVC (SWR) bends, any radius. |
| 44 | S&F 110mm bore PVC (SWR) bent cowl, any radius. |
| 45 | S&F PVC (SWR) bends any radius of 75 mm dia all as specified. |
| 46 | S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement |
| 47 | S&F GI split clamp/chili clamp (110/75 mm NB PVC Pipe) with fastnor, rod dia not less than 10 mm dia allas specified and directed by Engr-In-Charge. |
| 48 | S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe orfor brass ferrule andfixed bothends foriron pipe or for unions |
| 49 | S&Fin repair 15 mm dia Pillar tapcast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G Ipipe or for brass ferrule all as specified. |
| 50 | S&Fin repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified. |
| 51 | S&F in repair CP concealed stop cock for 15 mm bore pipe fixed. |
| 52 | S&F 15mm diafancy type chromium plated angle valve/cast copper ally screweddown, high pressure, with crutch or butterfly handlescrewed bothendsfor ironpipe or for unions and fixed to GI Pipe. |
| 53 | S&F in repair health feucet to EWC CP brass with minimum 1500mm long CPflexible pipe connection etc, complete all as approved Make : Parryware Cat No T9940A1 or equvailent . |
| 54 | S&F in repairs15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner all as specified.Make: Jaguar /ESS-ESS/Prayag |
| 55 | S&F125 mm dia CP brassshower rose with orwithout swivel joints any size includingfixing to steel pipe or unionadd if fixed in repair all as specified and directed. |
| 56 | S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screwsall as specified. |
| 57 | S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats |
| 58 | S&F Hat pegs set of three, solid body,125mm to 175 mmbrass fancy type, all as specified fixed |
| 59 | S&F in repairs bevelled edge mirror of selected quality 5mm thickglass mounted on fixed to stainless steel fastener 50mm long spacer/wooden plugs with chromium platated brass screw and cup washers all as specified |
| 60 | S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair. |
| 61 | S&F in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) |
| 62 | Demolition of sunken floor treatment of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:-(a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical \" PIDIPROFF LW of Dr Pidilite or equivalent \" as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia GI Pipe 650mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalentgrout as directed(d) Make anglefillets by PCC 1:2:4 and slop towards spout pipe(e) supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Suprema Damp block 2K Suprema or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048 rediction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.20mm as per ASTM 4548.50 The coating shall have food grade certificate from laboratories like CFTRI, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., Complete as per manufactures specifications. (f) Fill the sanitary gaps with sealing compounds complete |
| 63 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete,all as specified. |
| 64 | M&Lcement concrete type F2 1:7:12(40mm brick aggregate)/cinder filling in sunken floor portion in WC/Bath as specified and directed by Engr-in Charge |
| 65 | M&L for 40mm thick PCC 1:2:4,type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, complete, all as specified & directed. |
| 66 | M&L for pre-cast RCC 1:2:4 Type B1 set in cement mortar as in cover slab and similar articles with plain face |
| 67 | M&L for reinforced cement concrete 1:1.5:3 (Nominal mix)using 20 mm graded aggregates as in slabs for WHB supported on walls, beams, column etc complete all as specified and directed. |
| 68 | S&F mild steel TMT bar 10 and over,cut to legth bent to shape required incl cranking, binding with mild steel wire (aneaiied) not less than 0.9mm etc |
| 69 | Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) completeincluding all electrical fittings & fixtures(DBs,submain,cables etc)all as specified and directed by Engineer-in-charge. |
| 70 | Taking down carefully Submain wiring any size completeincluding all electrical fittings & fixtures etcall as specified and directed by Engineer-in-charge. |
| 71 | Taking down carefully any Light fittings/fixtures/Ceiling fan/wall fan/Ex fan any size completeincluding all (electrical fittings & fixtures etc)all as specified and directed by Engineer-in-charge. |
| 72 | Material and Labourfor point wiring complete with 1.5 sqmm (nominal area) FRLS gradePVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduitwith accessories including 1.5 sqmmFRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified. |
| 73 | All as per Item No 72 hereinbefore but forOne 5 A socket outlet on independent Board all as specified and directed. |
| 74 | All as per Item No 72 hereinbefore but forOne 5 A socket outlet onsameBoard all as specified and directed. |
| 75 | All as per Item No72 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmmFRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed. |
| 76 | Supply and fix frame plate with match cover three module all as specified and directed. |
| 77 | All as per item No.8 above but six module all as specified and directed. |
| 78 | All as per item No.8 above but eight module all as specified and directed. |
| 79 | Supply and fix terminal box suitable three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed. |
| 80 | All as item No 79. above but six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc. all as specified and directed. |
| 81 | All as item No 79. above but eight modular plat of including cutting, grooving and plastering etc. all as specified and directed. |
| 82 | Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified. |
| 83 | Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified. |
| 84 | Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified. |
| 85 | Supply and fix Modular socket 6A/16A2/3 pin combined 230V AC 50 HZ SP two module all as specified. |
| 86 | Supply and fix PVC Ceiling rose all as specified. |
| 87 | Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, Make- Philips or Eqv to Havells/Bajaj |
| 88 | Supply and fix Mirror light/ wall spot/Display/picture light with adjustable head and colour changing fucntion 10Wall as per directed. |
| 89 | Supply and fixin rep[air ofMCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. |
| 90 | Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door,AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:-(a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No.(b) MCB, SP, AC, 240 volt of 06 to 32 Amp, \"C\" curve, 10 KA breaking capacity - 12 Nos. |
| 91 | Supply and fix MCB SP 230V, 6-32 Ampscapacity all as specified and directed. |
| 92 | Supply and fix MCBSPN 230V, 6-32 Ampscapacity all as specified and directed. |
| 93 | Material and Labour for Submain wiring with 2 runs of FRLSgradePVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & includingPVC Conduit pipe 20 mm dia with all fittings all as specified and directed. |
| 94 | Material and Labour for Submain wiring with 2 runs of FRLS gradePVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and includingPVC Conduit pipe 20 mm dia with all fittings all as specified and directed. |
| 95 | Material and Labour for Submain wiring with 4 runs of FRLS gradePVC copper conductor cable 10 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and includingPVC Conduit pipe 20 mm dia with all fittings all as specified and directed. |
| 96 | Supply and fix Modular type AC box single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB all as specified and directed |
| 97 | Supply and fixing steel body Exhaust fan 300 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make:- Bajaj/Havells/Crompton/Usha |
| 98 | Material and labour Earthing complete with galvanized steelearth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion. |
