|
| 1 | Supply in replacement, laying, jointing and leakage testing GI Pipe 50 mm bore medium grade (ISI marked) including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc complete all as specified and directed.Notes: (i) The laying and jointing of pipes are required to be carried out in short/ long streches catering to specific requirements of a particular quarter, building block or a group of blocks.(ii) Excavation & earth work shall be measured & paid seperately under respective item of BOQ. |
| 2 | Takingdown steel tubing 50mm diaand connections all as directed by engineer in charge. |
| 3 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 50 mm dia GI Pipes all as per directed by Engineer in charge . |
| 4 | Cutting existing steel tubing for alterations or additions (Each cut measured) of size 50 mm dia GI Pipes all as per directed by Engineer in charge . |
| 5 | Refixing old steel tubing50MM diaand connections in new or old position all as specified and directed by engineer in charge. |
| 6 | S&F in replacement of Gun metal Gate valve (ISI Marked) with iron wheel head, screwed both ends for iron pipe of the size 50 mm bore complete all as specified and directed. |
| 7 | M & L for repairs to Centrifugal pumpset of capacity 25 HP including replacing the worn out nuts, bolts, rubber gasket, gland packing with cup, ball bearing-02 Nos., gun metal shaft key,hard rubber coupling bush, etc and making serviceable condition complete servicing all as specified and directed |
| 8 | All as per item No 07 above but horizontal type of capacity 20 HP |
| 9 | All as per item No 07 above but vertical type of capacity 20 HP |
| 10 | All as per item No 07 above but of capacity 7 HP |
| 11 | S & F in replacement of Star-delta starter suitable to 25/20 HP pump set incl suitable relays, connection with existing pump set and testing to the satisfaction of Engr-in-Charge. |
| 12 | M&L in replacement of contactor 3 pole, 415 Volts suitable for 25/20 HP Auto Star Delta Starter. |
| 13 | M&L in replacement of Overload Relay of range 20 to 32 amps suitable for 3 Phase 20/25HP Auto Star Delta Starter. |
| 14 | M&L for Spray painting to motor and pump set of 20/25 HP capacity incl foundation frame with one coat of synthetic enamelled paintetc all as specified and directed by engineer in charge. |
| 15 | M&L for Spray painting to motor and pump set of 7 HP capacity incl foundation frame with one coat of synthetic enamelled paintetc all as specified and directed by engineer in charge. |
| 16 | M&L Rewinding of motor of centrifugal pump set of25 HP capacity by using super enamelled copper wire of suitable gauge to match with the existing including varnishing, drying,and replacement of UNSV parts of existing size/approved make such asbearing of appropriate size, nuts, bolts and washers,packing , etc complete all as directed. |
| 17 | M&L Rewinding of motor of centrifugal pump set of20 HP capacity by using super enamelled copper wire of suitable gauge to match with the existing including varnishing, drying,and replacement of UNSV parts of existing size/approved make such asbearing of appropriate size, nuts, bolts and washers,packing , etc complete all as directed. |
| 18 | M&L Rewinding of motor of centrifugal pump set of7 HP capacity by using super enamelled copper wire of suitable gauge to match with the existing including varnishing, drying,and replacement of UNSV parts of existing size/approved make such asbearing of appropriate size, nuts, bolts and washers,packing , etc complete all as directed. |
| 19 | M & L for taking down/removing u/s foot valve, supply and fix foot valve heavy duty 50 mm size ofBrass body with screwed/flanged ends as required at site |
| 20 | All as per item No 53 above but for 65/80 mm dia |
| 21 | Supply only chlorine test kit with coloured Sample complete with all testing filament and Two Reagent Namely Sodium chloride(100 ML) and sulphuric acid (75 ML) solution in rexine finish box all as specified and directed. |
| 22 | Supply and fix Chloring dozing pump tube all as specified and directed ,Cat part No MCCP207-B of Declibec or Equivalent |
| 23 | Supply and Chlorine dozing duckbill only all as specified and directed .Cat part No MCCVDBO of Declibec or Equivalent |
| 24 | Supply and install in repair MCCB, 4 pole, 415 v, adjustable type, 25 to 100 A and 16 KA, 50 HZ,including spreader links on both sides complete all as specified and directed |
| 25 | Supply and fix NRV 50 mm dia,Class PN1.6,Cast iron body,flanged both ends for iron pipe of size 50 mm dia complete all as specified and directed |
| 26 | Supply only water pressure gauge, 100 mm dial size of range 0 to 7.0 Kg/Sqcmcomplete all as specified and as directed. |
| 27 | M&L for arresting of water leakage from existing pipe line in position from GI pipe of 50/25mm dia sizes ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,furrel, union ,solution,thred etc) and refilling etc complete.All as specifide anddirected by Engineer- In- Charge. Note:- (i) Excavation up to 1x1x6 Mtr will be deem to incl in quoted rate. Moreexcavationwill bemeasured and paid saperately. (ii)Pipe length will be measured and paid saperately. |
| 28 | Taking out / Lifting of defective submersible pump set of 15HP capacity from bore well including motor, column pipes upto 100 mm dia, submersible cable and accessories etc and depositing in AGE E/M store yard complete all as specified and as directed. |
| 29 | Lowering only submersible pump set of 15 HP along with motor, column pipes, submersible cable and accessories etc after repairing including testing commissioning of submersible pump set complete all as specified and as directed. |
| 30 | Dismantling of pump motor set up to 15 HP complete, (Taken out under above item / lying U/S in store yard of AGE E/M) cleaning all dismantled spares parts / winding for inspection of Engineer-in-Charge to ascertian the scope of work for repair / replacement of parts complete all as specified and as directed.Note :- Spare parts shall be measured and paid separately under respective item of BOQ. |
| 31 | Rewinding of submersible motor, 15 HP, 3 Phase, 50 Hz, 415 Volt with PVC insulated / coated super enameled copper winding wire of existing gauge with other winding material such as insulating paper, sleeves, bamboo stick etc. as per standard manufacturers specification including cleaning of stator, slots including replacement of defective parts and testing complete all as specified and as directed . |
| 32 | S&F in replacement epoxy type cable jointing kit 10/6 Sqmm 3 core complete with all the jointing material, ferrule, insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and as directed. |
| 33 | M&L for machining work required for repair to submersible pump set 15 HP by straightning, polishing of pump shaft, making screw and key way, complete including replacement of wornout parts re-assembling pump after repair for smooth functioning of pump complete all as specified and as directed.Note:- Fixing payment shall be deemed to be included in quoted rate. |
| 34 | Supply only SS impellers with key and distance bushes suitable for 15 HP Pumpcomplete all as specified and as directed. |
| 35 | Supply only NRV suitable for 15 HP Pump complete all as specified and as directed. |
| 36 | Supply only Bearing bush upper & lower suitable for 15 HP Pump complete all as specified and as directed. |
| 37 | Supply only Neck ring suitable for 15 HP Pump complete all as specified and as directed. |
| 38 | Supply only Distance sleeve suitable for 15 HP Pump complete all as specified and as directed. |
| 39 | Supply only GM motor bush upper and lower (set of two) for 15 HP complete all as specified and as directed. |
| 40 | Supply only Rotor bearing sleeve upper and lower for 15 HP complete all as specified and as directed. |
| 41 | Supply only Couplingwith key for motor pump for 15 HP complete all as specified and as directed. |
| 42 | Supply only Sand Guard for submersible pump set for 15 HP complete all as specified and as directed. |
| 43 | Supply only Thurst bearing assembly for submersible pump set motor of15 HP complete all as specified and as directed. |
| 44 | Supply only CI Bowl suitable for submersible pump set 15 HPcomplete all as specified and as directed. |
| 45 | Supply And Fix MS iron round End cap 10mm thickness for 150mm dia bore casing pipe with 02 nos of MS clamp for holding 50mm GI pipe including all necessary work complete all as specified and as directed. |
