|
| 1 | 115 mm thick brick wall laid in cement sand mortar 1:4 without reinforcement in super structure. |
| 2 | Screed of 50mm thick cement concrete 1:8:16 with stone aggregate to be laid below the topping using mechanical mixer for mixing of material. |
| 3 | Extra Labour for Projected nosing of stair case of any shape and design. |
| 4 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 5 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm |
| 6 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 8 | 15 mm i/d |
| 9 | 20 mm i/d |
| 10 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 11 | 15 mm i/d G.I. Union |
| 12 | 20 mm i/d G.I. Union |
| 13 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laidin the ground or inside buildings including all carriages complete. |
| 14 | 20mm i/d Gun Metal peet valve |
| 15 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 16 | Through wall 22.86 cm thick |
| 17 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. |
| 18 | 15mm internal diametre pipe line. |
| 19 | 20mm internal diametre pipe line. |
| 20 | Providing and installing in position premium range water pressure boosting pump of GRUNDFOS make or equivalent (To the approval of Engineer-in-charge) including all pump accessaries but excluding cost of G.I pipe & specials complete in all respects. |
| 21 | Pressure pump of 0.9 HP with 4700 LPH, 27.3meter head with SS pump & 24 litre capacity TankModel : |
| 22 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 23 | Chinaware wall mounted E.W.C. without cistern including seat cover complete in all respect. |
| 24 | Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect. |
| 25 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 26 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in- charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 27 | Table Top (size 49 x 40 x 15 cm) |
| 28 | Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge. |
| 29 | Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-incharge) complete in all respect. |
| 30 | Providing & Fixing in postion CP Brass bath tub spout with wall flange of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 31 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 32 | CP brass Acrylic Shelf size 560mmx130mm |
| 33 | C.P. brass Glass Corner with rail 8 mmthickness and height 250 mm |
| 34 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 35 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 36 | Size 1500mmx600mm or anyother size |
| 37 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 38 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 39 | C.P. Brass extension piece, 25mm long to 50mm long |
| 40 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 41 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respe |
| 42 | C.P. brass Bib cock with Wall flange |
| 43 | C.P.brass 15mm Angular stop cock with Wall flange |
| 44 | C.P.brass 15mm Concealed stop cock with adjustable wall flange. |
| 45 | C.P. brass 3-Hole Basin Mixer Without Popup Waste System |
| 46 | C.P. brass overhead shower Φ180mm round shape single flow with shower arm with 20mm i/d Inlet and 300mm long round shape with 900 bend with flange. |
| 47 | C.P. Brass Accessories: |
| 48 | C.P brass towel ring |
| 49 | C.P. brass toilet paper holder |
| 50 | C.P. brass towel rack 600mm long |
| 51 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 52 | PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 53 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge) including cutting, jointing, wastage, but excluding cost of lead jointing. |
| 54 | 100mm i/d H.C.I. pipe lines laid complete |
| 55 | 75mm i/d H.C.I. pipe lines laid complete |
| 56 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval ofEngineer in Charge. |
| 57 | 100mm i/d |
| 58 | 75mm i/d |
| 59 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. |
| 60 | With 100mm x 75mm i/d Floor Trap(weighing 5.8 Kg) |
| 61 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 62 | For 100mm i/d pipes |
| 63 | 100mm i/d H.C.I. Heal Rest Bend |
| 64 | 100mm i/d Plain Tee |
| 65 | 100mm i/d Bend plain |
| 66 | 100mm i/d Collars |
| 67 | 100mm i/d off sets 150mm Projection |
| 68 | For 75mm i/d pipes |
| 69 | 75mm i/d Plain Tee |
| 70 | 75mm i/d Collars |
| 71 | Off sets 75mm Projection |
| 72 | Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge. |
| 73 | 100mm i/d H.C.I. pipe |
| 74 | 75mm i/d H.C.I. pipe |
| 75 | Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km. |
| 76 | 100mm i/d H.C.I. specials |
| 77 | 75mm i/d H.C.I. specials |
| 78 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 79 | Eurpoean/Indian/Orissa W.C., |
| 80 | PVC / China Ware Cistern |
| 81 | Wash Hand Basin / Urinal Pot |
| 82 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 83 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 84 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 85 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 86 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 87 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 88 | Brass Ball Cock with rod and Plastic Ball |
| 89 | 20mm i/d |
| 90 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 91 | Triple Layer Tanks |
| 92 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 93 | G.I. tank nipple 20mm i/d |
| 94 | Providing and fixing MS Angle Iron Shed for Electrial Motor with fibre sheet on top fixing with rivets as per approval of Engineer in charge including cost of material and labour complete in all respects. |
| 95 | Making RCC slab for WHB including material and labour complete in all respect. |
| 96 | Carriage of Malba from site of work to dumping ground. |
| 97 | Renovation of Kitchen |
| 98 | Screed of 50 mm thick cement concrete 1 : 8 : 16 with stone aggregate to be laid below the topping (using mechanical mixer for mixing of material). (A&C-11). |
| 99 | Extra Labour for Projected nosing of stair case of any shape and design. |
| 100 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 101 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 102 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete . |
| 103 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 104 | 15 mm i/d |
| 105 | 20 mm i/d |
| 106 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 107 | 15 mm i/d G.I. Union |
| 108 | 20 mm i/d G.I. Union |
| 109 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laidin the ground or inside buildings including all carriages complete. |
| 110 | 15mm i/d Gun Metal peet valve |
| 111 | 20mm i/d Gun Metal peet valve |
| 112 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 113 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 114 | Through wall 22.86 cm thick |
| 115 | Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 116 | Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in allrespect. |
| 117 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1 mm thick, grade-304 (18/8) with waste coupling complete in all respect. |
| 118 | Double bowl Sink without drain board Overall size 1114 x 490mm with bowl size 460x385x200mm including waste coupling |
| 119 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 120 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 50 mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 121 | C.P. Brass extension piece, 25mm long to 50mm long |
| 122 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 123 | C.P. Brass fittings: |
| 124 | C.P.brass 15mm Angular stopcock with Wall flange |
| 125 | C.P brass Sink mixer withswinging spout.(wall mounted) |
| 126 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval ofEngineer in Charge. |
| 127 | 75mm i/d |
| 128 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. |
| 129 | With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) |
| 130 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I. specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 131 | For 75mm i/d pipes |
| 132 | 75mm i/d Plain Tee |
| 133 | 75mm i/d Collars |
| 134 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 135 | Size 75 mm x 75 mm |
| 136 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 137 | Stainless Steel Sink |
| 138 | CP Bib Cock/Angle Cock |
| 139 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 140 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 141 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 142 | Dismantling of Old granite and cabinarty and disposal of malba at a suitable place within a distance of 100 mtrs of the complex complete in all respect. |
| 143 | Drilling hole in Granite of size 1.25\" (32 mm) for making of provision for fixing of Gas pipe complete in all respect. |
| 144 | Carriage of Malba from site of work to dumping ground. |
| 145 | Providing and fixing Chimney of reqputed make complete in all respects. |
| 146 | Providing and placing in position Four Way Burner of Sunflame / Faber make complete in all respects. |
| 147 | Providing and fixing of kitchen cabinetries, depth 550 mm at bottom & 300 mm at top, made out of both side laminated board 18 mm thick with 8 mm thick teak ply on front shutters, along with all accessories such as stainless steel baskets, masala rack (triple shelf), power coated metabox of make \"Ozone/Asian Paint\", telescopic channel 20\" long make \"Ozone\", adjustable legs upto 4\" height for bottom cabinetries and 8 mm thick glass shelf, 5 mm thick glass for shutters and clamps to fix glass in shutters for top cabinetries including rubbers wood Cornish on top, machine moulding for shutters, melamine polish, soft close hinges make \"Ozone\", Stainless Steel Handles 6\" long etc. complete including carriage and labour charges for fixing at site complete in all respects. |
| 148 | Renovation of Servant bathroom |
| 149 | Screed of 50mm thick cement concrete 1:8:16 with stone aggregate to be laid below the topping using mechanical mixerfor mixing of material |
| 150 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete |
| 151 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 152 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 153 | 15mm i/d |
| 154 | 20mm i/d |
| 155 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 156 | 15mm i/d G.I. Union |
| 157 | 20mm i/d G.I. Union |
| 158 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laidin the ground or inside buildings including all carriages complete. |
| 159 | 20mm i/d Gun Metal peet valve |
| 160 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 161 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same& finishing according to existing finish where required. |
| 162 | Through wall 22.86 cm thick |
| 163 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 164 | Extra for providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend. |
| 165 | Providing and fixing jet spray with 2\"-6\" long PVC pipe. |
| 166 | With C.P. Brass nut |
| 167 | Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern. |
| 168 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 169 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 170 | Size 550 mm x 400 mm x 815 mm |
| 171 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 172 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in- charge) fixed in to wall with C.P brass screws complete in all respect. |
| 173 | C.P. brass toilet paper holder |
| 174 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 175 | C.P. brass towel Rails size 15mm dia 610mm long |
| 176 | C.P brass towel ring |
| 177 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-incharge) fixed in with rawl plugs and C.P. brass screws complete in all respect. |
| 178 | C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 179 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-harge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 180 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 181 | Size 550mmx400mm |
| 182 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 183 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 184 | C.P. Brass extension piece, 25mm long to 50mm long |
| 185 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 186 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 187 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 188 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 189 | C.P.brass 15mm Concealed stop cock with flange. |
| 190 | C.P.brass 15mm Angle valve without flange |
| 191 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 192 | PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut |
| 193 | Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. |
| 194 | 100mm i/d H.C.I. pipe lines laid complete |
| 195 | 75mm i/d H.C.I. pipe lines laid complete |
| 196 | Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval ofEngineer in Charge. |
| 197 | 100mm i/d |
| 198 | 75mm i/d |
| 199 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc. |
| 200 | With 100mm x 75mm i/d Floor Trap(weighing 4.0 Kg) |
| 201 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I. specifications of E.L.C. manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 202 | For 100mm i/d pipes |
| 203 | 100mm i/d H.C.I. Heal Rest Bend |
| 204 | 100mm i/d Plain Tee |
| 205 | 100mm i/d Bend plain |
| 206 | 100mm i/d Collars |
| 207 | Off sets 75mm Projection |
| 208 | For 75mm i/d pipes |
| 209 | 75mm i/d Plain Tee |
| 210 | 75mm i/d Collars |
| 211 | Off sets 75mm Projection |
| 212 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and makinggood the same to its original condition. |
| 213 | Size 75 mm x 75 mm |
| 214 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 215 | Eurpoean/Indian/Orissa W.C., |
| 216 | PVC / China Ware Cistern |
| 217 | Wash Hand Basin / Urinal Pot |
| 218 | CP Bib Cock/Angle Cock/StopCock/Shower/Bottle Trap |
| 219 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 220 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 221 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 222 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 223 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge)in PVC Water storage tanks complete in all respect. |
| 224 | G.I. tank nipple 20mm i/d |
| 225 | Carriage of Malba from site of work to dumping ground. |
| 226 | Less Credit for old materialvalve Please Enable Macros to View BoQ information |
