|
| 1 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 2 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 3 | Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed. |
| 4 | Taking down shutter of any description area not exceeding 1 sqm each and removing to store complete all as specified and directed. |
| 5 | M&L Second class hard woodplain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 6 | M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 7 | M&L Second class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 8 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 9 | S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 10 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 11 | Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed |
| 12 | Taking down shutter of any description exceeding 1 sqmbut not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed |
| 13 | M&L Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 14 | S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 15 | M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and makinggood dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as requiredcomplete all as specified and directed. |
| 16 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed. |
| 17 | S&F 100 mm long aluminium handles cast type, anodized complete all as specified and directed |
| 18 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed |
| 19 | S&F 75 mmButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed |
| 20 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed |
| 21 | S&F in repair 100 mm long aluminium anodized handles fabricated typecomplete all as specified and directed |
| 22 | S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed. |
| 23 | S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed |
| 24 | S&F in repair 75 mmButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 25 | S&Fin repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 26 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 27 | S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 28 | Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed. |
| 29 | S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 30 | S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 31 | S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 32 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm longfasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and including5mm thick glazing with selected quality glass all as specified and directed. |
| 33 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories and including5mm thick glazing with selected quality glass all as specified and directed. |
| 34 | Providing and fixing factory made uPVC white colour fixed or lovoured window/ ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profileOnevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick,galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- and including5mm thick glazing with selected quality glass all as specified and directed. |
| 35 | S&F 7mm thick aluminium grills of make \"Decogrill\" model DG 104 surrounded by aluminium \"C\" channel with mesh size 75 X 75mm all as specified and directed. |
| 36 | S&F in repair PVC Pre - laminated factory made almirahs cupboard andtoilet cabinet WHB under counter-type & washbasin cabinet shutter with frameof 18 mm thick approved colour /shed quality and make made from PVC one side pre laminated sheet .The exposed edges shall be sealed with PVC edges beading of same shed and colour, the shuttershall be fire retradent having necessary screws & sliding chennals forholding capacity,Shutter shall be fixed to frame using approved hinges with necessary stain less steel screws,andincluding taking down toilet cabinet/ cub bord shutters with frameof any description etccomplete all as specified andas directed. |
| 37 | S & F in repair built in cupboards & CB shutter with frame and shelves made of solid uPVC foam profile withhomogenoud fine cellular structure having smooth outer integral skin having 45mm width and 18 mm thickness as vertical & horizontal stiles, joints are made and shall be fixed to walls using required size sheet metel screw and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mm x 17mm. the panel shall be filled with accucel polank profile of size 250mm width and 6mm thick complete all as specified by manufacturer instruction and as directed. |
| 38 | S&F continuous (piano) hinges ofbrass width of flaps (when open) 40 mm,bright finish or electrogalvanised with cadmium plated screws complete all as specified and directed. |
| 39 | S & F 100mm size stainless stell handle fabricated type anodised complete all as specified and directed. |
| 40 | S & F 100mm size stainless anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and |
| 41 | S & F stainless steel slipon soft closing concealed hinges for cabinet doors, smooth operating hinges for full overlay door and window complete all as specified and directed |
| 42 | S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete al |
| 43 | S & F 40 mm dia, cupboard knobs polished, hard wood knobs fixed with screws for kitchen cabinet & below platform complete all as specified and directed. |
| 44 | S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end brackets and fixed with screw complete all as specified and as |
| 45 | S & F in repair Stainless steel fancy type curtain rod 25 mm dia including bracket/wall to wall and latto on each end complete all as specified and directed. |
| 46 | Taking down rolling shutters including all hardware fittings at any height (upto 12 Mtr) complete all as specified & directed |
| 47 | S & F in repair Complete rolling shutter including 1.00 mm thick mild steel rolling shutter strips duly pressed on both ends of vertical sides for interlocking locks for the required length of existingsteel rolling shutter including oiling and greasing to required necessary fitting to functionall shutters as required bush, Spring. MS pipe , rod .lock. ball bearing,top cover, anchoring rod, hasp and staple andpush pull or gear operating system, bevel gear box and crank handleetc at any height (upto 12 Mtr)complete all as specified.and directed. as directed by Engg-in-Charge |
| 48 | M&L Cutting holes in brick walls exc one brick but not exc two brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and makinggood dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required at any height (upto 12 Mtr)complete all as specified and directed. |
| 49 | M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed. |
| 50 | Taking down cover hood of existing rolling shutters(gear operated/ manually size any type ) carefully and completely over hauling the shutters by applying grease and oil in bearing, springs, guide cannels, operating rods, shaft gear boxes, gear wheel etc straightening thoroughly shutter blades, guide channels anchoring rods etc and fixing back the over hood in position and ensure smooth functioning of shutters at any height (upto 12 Mtr) complete all as directed.(Note : worn out part for replacement will be measured and paid separately.) |
| 51 | Supply and fixing in repairsMS gear box complete incl handle and anchoring rod as of approved quality of steel rolling shutters at any height (upto 12 Mtr)complete all as specified and directed |
| 52 | All as per item no. 51 but forBall bearing suitable for rolling shutter |
| 53 | All as per item no. 51 but forGuide channel 3\" (3.50 mm thick) |
| 54 | All as per item no. 51 but forCover hood made of 1 mm thk plain GI Sheet pattern |
| 55 | All as per item no. 51 but forBottom plate 5\" (2.25mm) |
| 56 | All as per item no. 51 but for C Class pipe 50 mm dia in shaft |
| 57 | All as per item no. 51 but forAnchoring rod of 25 mm dia of MS pipe |
| 58 | All as per item no. 51 but for Safety lever locks MS with 4 levers |
| 59 | M&L for preparation of old steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer and including removing old paints complete all as specified and directed. |
| 60 | M&L for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, thickness of metal to be welded exc 3 mm but n exc 6 mm complete all as specified and directed. (Note : Taking down the article and refixing in position after welding shall be measured separately) |
| 61 | M&L for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, thickness of metal to be welded exc 6 mm but n exc 9 mm complete all as specified and directed. (Note : Taking down the article and refixing in position after welding shall be measured separately) |
| 62 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed by Engineer-In-Charge |
| 63 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 64 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc at any height (upto 12 Mtr) all as specified and directed |
| 65 | M & L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 at any height (upto 12 Mtr)completed all as specified and directed. |
| 66 | Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc at any height (upto 12 Mtr) complete all as specified and directed. |
| 67 | M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) at any height (upto 12 Mtr)complete all as specified and directed. |
| 68 | M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement at any height (upto 12 Mtr) complete all as specified and directed . |
| 69 | M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered walls surfaces/matching to old surface of walls making absolutely even and smooth, rubbing with sand paperat any height (upto 12 Mtr)complete all as specified and directed |
| 70 | M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on newly prepared surfaces/matching to old surface of walls including, rubbing with sand paper at any height (upto 12 Mtr)complete all as specified and directed. |
| 71 | M&L for preparation of newly plastered surfaces of walls/matching to old surface of walls and apply three coat of white wash at any height (upto 12 Mtr) complete all as specified and directed. |
| 72 | M&L for preparation of newly plastered surfaces/matching to old surface of walls of ceilings and apply three coat of white wash at any height (upto 12 Mtr)complete all as specified and directed. |
| 73 | M & L for two coats of cement based paint over a coat of primer on new plastered surface of wallsor matching to old surface of walls including preparation of surface complete all as specified and directed. |
| 74 | Excavation in trenches n .exc 1.5 mtr wide and not exec 1.5 mtr depth and getting out in looses/soft soil complete all as specified |
| 75 | Excavating in trenches not exceeding 1.5 meter wide andexceeding1.5 meter and not exceeding 3meter in depth for foundation for erection of poles, stays, laying cables, stays etc and getting out in soft/loose soil all as specified and directed. |
| 76 | Returing filling in incl spreading leveling, watering and well ramming in layer not less than 25 cum each layer all as specified. |
| 77 | Removing excavated material to a distance not exc 50M anddepositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified |
| 78 | Supply and fix double wall corrugated HDPE pipe 50mm outer dia for protection of UG cable complete all as specified and directed |
| 79 | M&L PCC 1:4:8 type D 2 using 40 mm graded stone aggregate for fillingof pole & stay complete all as directed |
| 80 | M&L PCC 1:3:6 type C 2 using 40 mm graded stone aggregate for fillingof pole & stay complete all as directed |
| 81 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for copining of pole complete all as directed |
| 82 | M & Lfortubelightgrade galvanisedwithallfittingslaidalong the pole/intrenches / underroadorfloorof50mmbore including removing the rusted old one completeallasspecifiedanddirected. |
| 83 | Taking out old unserviceable PCC/steel tubularpole 9 mtrs long and supply and fixing steel tubular swaged poles with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and erecting in position all as specified and directed with shifting of conductors and insulators including painting the exposed portion with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer with and including marking of pole number with black paint in yellow circle, complete, all as specified and directed. |
| 84 | Taing out old usserviceable PCC pole of any size and supply and fixing in repairs Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and l02mm x 279mm at bottom, class 10 and erecting in position all as specified and directed with shifting of conductors and insulators including painting the exposed portion with two coats of weather proof paint complete, all as specified and directed. |
| 85 | M & L stay assembly complete with accessories as shown in electrical plate No 1 (Loop type insulator, stay clamps, excavation and concrete only measured separately) using diameter of stay rod 16 mm and MS stay plate 230mm x 230mm including taking down complete all as directed. |
| 86 | Taking out old UNSV and Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for 10 Sqmm 2 Core , including taking down old, complete, all as specified and directed . |
| 87 | All as per item no. 86 but for 16 Sqmm 2 Core. |
| 88 | All as per item no. 86 but for 16 Sqmm 4 Core. |
| 89 | All as per item no. 86 but for25 Sqmm 3.5 Core. |
| 90 | M/L for replacement of Earthing complete with GI earthplate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point all as specified and as directed by Engr-in-charge. |
| 91 | M/L for replacement of Earthing complete with GI earthplate 60x60cmx6mm thick electrode and using galvanised iron strip 32 x 6 mm as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI strip 32x6 mm as earthing leadmeans of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 40 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point all as specified and as directed by Engr-in-charge. |
| 92 | Supply and fixing of moulded case circuit breaker Four pole 100 Amps 16 KA capacity 415V 50Hz with Ics = 50% Icu as per IEC 60947-II suitable for isolation class II front face fixed overload and fixed short circuit setting. taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 93 | S & F in replacement of new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedde PC coverhaving bottom opening seperate driver compartment with IP 66 protection and impact resistance of IK08 with suitable for pole dia 42 mm of capacity 45 watts complete all as specified and directed. |
| 94 | S & F in replacement of new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedde PC coverhaving bottom opening seperate driver compartment with IP 66 protection and impact resistance of IK07 with suitable for pole dia 42 mm of capacity 60 watts complete all as specified and directed. |
| 95 | Supply and fixing in replacement of LED driver for suitable for 45W to 60 W,complete all as specified and directed. |
| 96 | Supply and Fix in repair for PVC junction box of size 270 x 225 x 135 mm with Aluminium bus bar 200 Amps capacity -4 No\"s. MCB SP 6 Amp - 1 No and having provision of cable hole in bottom for two to three armoured cables of size 25 Sqmm 3.5 core, connection box shall be fitted on street light pole and fixing arrrangements i.e. MS clamps etc deemed to be provided by the contractor all as specified and directed . |
| 97 | Taking down and replacement ofexisting unserviceable street light fitting bracket with new brackets made out of 32mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primer,complete all as specified and directed. |
| 98 | S&F of Cable jointing kit for 1.1 KV (Earthed)grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 16 to 25 sqmm,complete all as specified and directed. |
| 99 | Checking of street/security lights breakdown maint of overhead lines/9 mtr pole/swan neck polesby checking out the cables/carbon removel /connectors/mcbs etc and locating the fault and replacing with necessary cables for jumpers/ clamps & connectors/terminal box etc, making good, cleaning and lubricatingtheparts etc complete all as specified and as directed : Note 1: quoted rate inclusive of vehicle with ladder and manpower job card received from power house and after completion of work job card return to power house .Note 2 Drivers/PCBs/cables/fittings/terminal box/ disc/pin insulators, are measured and paid separately under relavent items |
| 100 | Supply and fix in replacement of Timer panel, made of MS Enclosure factory made consisting Astronomical timer with max load of 12 KW with 65 A TP contactor with MCB 63 Amp TPN three phase 415 volts conforming to IS/IEC 60947-4-1, provided with protection degree IP 54 with internal wiring FRLS copper cable, in built shor-circuit-protection, class H insulation complete as as specifed and directed with suitable size of angle iron frame and necessary PCC Wk all as specified and as directed by Engr-n-charge |
| 101 | M&L for taking down the motorised / manual High Mast Lights circular grid accomodating MH/MV light fittings any cap over a ht of 15 mtrto the ground, taking aside, replacing the unsv control gears/ light fittings with LED fixtures and raising back to its original position upto 15 mtr etc complete all as specified and as directed (Rates quoted shall be incl of replacing required accessories where specifically not mentioned but required to complete the Job except LED fixtures) |
| 102 | S&F in replacement astronomical + digital time switchcomplete all as specified and directed. |
| 103 | Supply and fix in replacement of automatic modular contactor with 3NO+1NC, 40A, 3 module, 50HZ suitable for timer switch of street light complete all as specified and directed |
| 104 | Boring of holes horizontally for laying of 40mmdia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed. |
| 105 | Supply and fix post-top lantern 25 watt ruby clearenergy saving, environmental friendly, long life aesthetically designed with IP 65 symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source |
| 106 | M&L in replacement ofnew generation energy saving and environmental friendly, long, life pressure die cast aluminium housing flood light with PC diffused lens enclusre over LED for glare free light of capacity 120 watts, 240 volts, 50Hz ,complete all as specified and directed. |
| 107 | M & L for Cutting and trimming of tree branches 3 mtr all around of any size which is obstructing illumination of street light and touching LTOver head line by using required tools and plants incl removing trimmed tree branches. (Note : Each cleaning will be measured and paid separetely) |
| 108 | Supply and fixing in repairs SP 5-32 amp rating 240V, 10KA \"C\" curveminiature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning,complete all as specified and directed. |
| 109 | Supply and fixing in repairs SPN 32-40 amp rating 240V, 10KA \"C\" curveminiature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning,complete all as specified and directed. |
| 110 | Supply and fixing in repairs TPN 40-100 rating 415, 10KA \"C\" curveminiature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning,complete all as specified and directed. |
| 111 | S&F in repairs PVC insulated and FR PVC round sheathed copper conductor(flexible), 1100 volts, conforming to IS 694 of size1.0 Sqmm 3 core complete all as specified and directed |
| 112 | M&L for in repairs service wire sheathed flat 2 core aluminium conductor of size 4 Sqmm, 1100 volts grade complete all as specified and directed |
| 113 | M&L for in repairs service wire sheathed flat 2 core aluminium conductor of size6 Sqmm, 1100 volts grade complete all as specified and directed |
| 114 | M&L for in repairs service wire sheathed flat 2 core aluminium conductor of size10 Sqmm, 1100 volts grade complete all as specified and directed |
| 115 | S&F in repairs PVC conduit pipes 19 mm outer dia corrsion free, thermal resistance -5 degree to +60 degree celcius, self extinguishing complete all as specified and directed |
| 116 | S & F in repairs Galvanaised Iron cross arms channel, bracing, support, clamps etc fabricated structured steel, sections, including nuts, bolts, washers etc and cutting to required length beat to any shape drilling holes, fixed on poles or jointed by means of elect welding complete incl painting with 2 coats of aluminum paint over a coat of red oxide primer after preparation of surfaces incl taking down / dismantling the old items complete all as directed. |
| 117 | S&F in repairs energy saving environmental friendly long life bamboo LED bollard light of capacity 8 watts, 240 volts, 50 Hz with IP 65 complete all as specified and directed |
| 118 | M&L for painting steel tubular/ RS Joist/ Rail pole 11/9 mtrs long alongwith bends with two coats of aluminium paint over a coat of red oxide primer, including four layers of zebra painting 30 cm each layer with black and yellow in alternative from copping with and including marking of pole number with black paint in yellow circle, complete, painting of copping with two coats of weather proof paint of white colour all as specified and directed. |
| 119 | M&L for painting PCCpole 9 mtrs long alongwith bends with two coats of weather proof paint and two coats of black bituminous paint, aluminium painting to the bends clamps including four layers of zebra painting 30 cm each layer with black and yellow in alternative from copping and including marking of pole number with black paint in yellow circle, complete, painting of copping with two coats of weather proof paint of white colour all as specified and directed. |
| 120 | Taking out old UNSV PCC/ Steel pole and Supply and errectingGalvanised Octaganol pole of section Length 9 Mtr,Top 70 mm bottom 155 mm and thickness 3 mm with base plate 260x16 mm of hot dip galvanised 65 micron with single out reach arm , fdn bolts ,nuts, screws and excavation earth work ,PCC fdn, dismantling of ug cables from existingold poles and connecting the same to newly errected octogonal pole,removing existing light fittingsfromold poles and re-fixing the same to octoganol poles and testing for smooth functioning all as directedNOTE:- Extra cables/wires reqd will be measured and paid seperately |
