|
| 1 | Material and lE9:G61ith all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. |
| 2 | One light point, controlled by one way switch,complete all as specified and directed. |
| 3 | One fan point, controlled by one way switch through regulator,complete all as specified and directed. |
| 4 | One bell point, controlled by bell push switch,complete all as specified and directed. |
| 5 | One three pin 5 Amp socket on same board with other switches,complete all as specified and directed. |
| 6 | One three pin 5 Amp socket on independent board,complete all as specified and directed. |
| 7 | Description allas per ItemNo 1 mentionedhere-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mmPVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed. |
| 8 | Material and labour for point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code. |
| 9 | One light point,controlled by one way switch,complete all as specified and directed. |
| 10 | One fan point, controlled by one way switch through regulator,complete all as specified and directed. |
| 11 | One bell point, controlled by bell push switch,complete all as specified and directed. |
| 12 | One three pin 5 Amp socket on same board with other switches,complete all as specified and directed. |
| 13 | One three pin 5 Amp socket onindependent board,complete all as specified and directed. |
| 14 | Description allas per ItemNo 2 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed. |
| 15 | Material and labour forconcealed point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit 20mm dia or higher size complete including factory made MS pressedmodular metal flush boxes with zinc coated duly concealed in wall of thickness 1.6 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. |
| 16 | One light point, controlled by one way switch,complete all as specified and directed. |
| 17 | One fan point, controlled by one way switch through regulator,complete all as specified and directed. |
| 18 | One bell point, controlled by bell push switch,complete all as specified and directed. |
| 19 | One three pin 5 Amp socket on same board with other switches,complete all as specified and directed. |
| 20 | One three pin 5 Amp socket on independent board,complete all as specified and directed. |
| 21 | Description all as per ItemNo 3 mentionedhere-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mmPVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed. |
| 22 | Description all as per ItemNo 3 mentionedhere-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 4.0 sq mmPVC insulated FRLS copper conductor and 4.0 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed. |
| 23 | Material and labourfor sub main wiring using approved colour coding as per IS, with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC concealed conduit and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note :(i) Two run of single core PVC cable with one run of earth conductorand conduit shall be measured as one unit.(ii) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs) |
| 24 | 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire,complete all as specified and directed. |
| 25 | 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire,complete all as specified and directed. |
| 26 | Material and labourfor sub main wiring using approved colour coding as per IS,with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit. |
| 27 | 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire,complete all as specified and directed. |
| 28 | 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire,complete all as specified and directed. |
| 29 | Supply and fixing of switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed. |
| 30 | Supply and fixing of socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed. |
| 31 | Supply and fixing of switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed. |
| 32 | Supply and fixing of socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed. |
| 33 | Supply and fixing of bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed. |
| 34 | Supply and fixing of Modular switch single pole one way 6 Amp complete all as specified and directed. |
| 35 | Supply and fixing of Modular switch single pole one way 16 Amp complete all as specified and directed. |
| 36 | Supply and fixing of Modular socket outlet 2/3 pin combined 6 Amp 240 volts complete all as specified and directed. |
| 37 | Supply and fixing of Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as specified and directed. |
| 38 | Supply and fixing of Modular bell push flush type, 5 Amps complete all as specified and directed. |
| 39 | Supply and fixing of calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. |
| 40 | Supply and fixing of stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size230 volts, 6 Amps 120 watts complete all as specified and directed. |
| 41 | Supply and fixing of ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. |
| 42 | Supply and fixing of energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 43 | Supply and fixing of energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 44 | Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 45 | Supply and fixing of round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 46 | Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting etc complete all as specified and directed. |
| 47 | Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make. |
| 48 | Supply and fixing of distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Amps rated bus bar & including one MCCB 100 Amp 4 pole as incoming including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make. |
| 49 | Supply and fixing of MCB single pole and neutral 240 volt 10 KA 40 Amp \"C\" series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed. |
| 50 | Supply and fixing of MCB single pole and neutral 240 volt 10 KA 32 Amp \"C\" series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed. |
| 51 | Supply and fixing of MCB single pole 240 volt 10 KA 6- 32 Amp \"C\" series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed. |
| 52 | Supply and fixing of MCB TPN 415 volt 10 KA 63 Amp \"C\" series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed. |
| 53 | Material and labour in replacement of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board andtesting on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GIlight grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded crushedstone aggregate) 75mm thick cover,reinforced with 8mm dia deformed or TMT bars 100mm C/Cboth way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed.NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item.(ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.(iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost. |
| 54 | Material and labour for laying, jointing and testing in replacement undergroundXLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes:(a)Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately.(b)Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses.(c)Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor. |
| 55 | 10.0 Sqmm, 4 core, complete all as specified and directed. |
| 56 | 16.0 Sqmm, 4 core, complete all as specified and directed. |
| 57 | 25.0 Sqmm, 4 core, complete all as specified and directed. |
| 58 | Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etcand getting out complete all as specified and directed. |
| 59 | Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed. |
| 60 | Material and labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed. |
| 61 | Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed. |
| 62 | Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 63 | Supply and laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed. |
| 64 | Attending internalElectric complaint in the blocks/lines/offices at different areas of Garhi Cantt and Beachers Road due to any reason like no supply, any fualt/complaints rectifications with supply & replacement of the following electricstores as mentioned in item No 39 to 81 here in after by trained person complete all as specified and directed. Notes :-(a) This item shall be measured and paid only when store requirement for attending and resolving the complaint is NIL(b) Incase, stores are required to attend and resolve the complaint, this item will not be measured and payment to the contractor shall be done under relevant items from 39 to 81.(c) All T&P and safety tools required to above job are included in the unit rate.(d) Unit rates also include the conveyance and communication faicility is requried the complete the job.(e) The complaint register,complaint slips for each area/zone ,materials issue register for each complaint slips will be maintain by the contractor or rep/supervisor and daily produced all documrnts to the JE/MCM / AGE E/M(f) Materials will provided by the contractor through this contract & neccessary unserviceable or replaced items/unuseditems deposited back to complaint cell. unserviceable/ replaced items will be credited in the Sch of credit items. |
| 65 | Supply and fixing of wall mounted LED tube light fitting 1x20 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. |
| 66 | Supply and fixing of wall mounted LED tube light fitting 1x10 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. |
| 67 | Supply and fixing of LED building securitylight fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete all as specified and directed. |
| 68 | Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, 6500K, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with profiled and flat diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking out old u/s fitting complete all as specified and directed. |
| 69 | Supply and fixing of round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 18 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size all as directed including taking out old u/s fitting complete all as specified and directed. |
| 70 | Supply and fixing ofround shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 15 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size all as directed including taking out old u/s fitting complete all as specified and directed. |
| 71 | Supply and fixing in repair of surface mouting PVC gang box of super quality for one switches with two /four holes complete all as specified and directed. |
| 72 | Supply and fixing in repair of surface mouting PVCgang box of super qualityfor threeswitches withtwo /four holes complete all as specified and directed. |
| 73 | Supply and fixing in repair of surface mouting PVC gang box of super qualityfor five to seven switches withtwo /four holes complete all as specified and directed. |
| 74 | Supply and fixing in repair of surface mouting PVC gang box of super quality for eight to twelveswitches withtwo /four holes complete all as specified and directed. |
| 75 | Supply and fixing in repair ofPlug Top, 3Pin, 5A with indicator ISI Marked complete all as specified and directed. |
| 76 | Supply and fixing in repair ofPlug Top, 3Pin,15 A with indicator, ISI Marked complete all as specified and directed. |
| 77 | Supply and fixing in repair ofCasing & caping 25mm width, ISI Mark complete all as specified and directed. |
| 78 | Supply and fix in repairPVC insulated & unshethedcopper multisranded FRLSH cable of size 1.5 sqmm complete all as specified and directed. |
| 79 | Supply and fix in repair PVC insulated & unshethedcopper multisranded FRLS cable of size 2.5 sqmmcomplete all as specified and directed. |
| 80 | Supply and fix in repair PVC insulated & unshethedcopper multisranded FRLS cable of size 4.0 sqmmcomplete all as specified and directed. |
| 81 | Supply and fix in repair PVC insulated & unshethedcopper multisranded FRLS cable of size 6.0 sqmmcomplete all as specified and directed. |
| 82 | Supply and fixing of GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete incl taking out old u/s fitting completeall as specified and directed. |
| 83 | Supply and fixing of flood light, 50 W, Outdoor type with high power LED\"s as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protectionincluding taking out old u/s fitting completeall as specified and directed. |
| 84 | Supply and fixing of flood light, 80 W, Outdoor typewith high power LED\"s as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete including taking out old u/s fitting completeall as specified.and directed. |
| 85 | Supply and fixing of flood light, 120 W, Outdoor type with high power LED\"s as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete including taking out old u/s fitting complete all as specified.and directed. |
| 86 | Supply and fixing of energy saving, surface mounted, LED 10 watt Bulk head luminaire with decorative ovaldiffuser comprrising of high brightness LEDs completeincluding taking out old u/s fitting complete all as specified.and directed. |
| 87 | Supply and fixing of decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, including suitable type of 9/15 Watts LED Lampcomplete including taking out old u/s fitting complete all as specified.and directed. |
| 88 | Supply and fix in repair of distribution box MCB Protected socket with Plastic enclosure (Surface mounting) 20 Amp MCB DBOXX Combo DP including Plug topcomplete all as specified and directed. |
| 89 | Supply and fixing of distribution boardVertical type TPN 4 Way double door,IP -43protection suitable for MCCB 100 to160 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make and paid separetaly |
| 90 | Supply and fixing of distribution boardSPN 8 Way double door,IP-43 protection for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make and paid separetaly |
| 91 | Supply and fixing of distribution boardSPN 4 Way double door,IP-43 protection for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make and paid separetaly |
| 92 | Supply and fix in repair MCCB 415 Volt, 16 KA, 4 pole 63 Amp thermal magnetic type 1CS=100% ICS complete including connection with suitable size copper lugs/thimbles complete all as specified and directed. |
| 93 | Supply and fix in repair MCB, single pole 240 Volt,C curve 10 KA ISI Marked5 to 32 Amps complete including connection with suitable size copper lugs complete all as specified and directed. |
| 94 | Supply and fix in repair MCB, SPN, 240 Volt, C curve 10 KAISI Marked, 20-32 Amps in existing DBs complete including connection with suitable size copper lugs complete all as specified and directed. |
| 95 | Supply and fix in repair MCB , TPN, 415 Volt, C curve 10 KA ISI Marked, 63Ampscomplete including connection with suitable size copper lugs complete all as specified and directed. |
| 96 | Supply and fix in replacement of new water tank steel inner shell with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity of cap 25 ltr geyser having wall thickness not less than 1 mm complete all as specified and directed |
| 97 | Supply and fixing in replacement of heating element square/ triangular/ fine threaded type or an existing shape of cap 1.5 KW ISI mark complete all as specified and directed. |
| 98 | Supply and fixing in replacement of heating element square/ triangular/ fine threaded type or an existing shape of cap 2 KW ISI mark complete all as specified and directed. |
| 99 | Supply and fixing in replacement of thermostat assembly of range 200 C to 850 C of any description suitable for25/50Ltr cap geysers ISI mark complete all as specified and directed. |
| 100 | Supply and fix in replacement of indicator lamp 230 Volt of red and green (circular/rectangular type) complete all as specifiedand directed. |
| 101 | Supply and fix in replacement of new flange assembly of any description made up of copper/brass any type or hole (6/7/9 hole) complete with safety valve for geyser of cap 25 ltr ISImark complete all as specified and directed. |
| 102 | Supply and fixing of exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louversshutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep completeand connecting up ceiling rose to connectorblock of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill. |
| 103 | Description all as per item No 76 above but fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed. |
| 104 | Supply and fixing of electric water heater, storage type ABS body with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etccomplete all as specified and directed. Note : Old geyser shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill. |
| 105 | Supply and fixing of electric water heater( Instantaneous electric heating), storage type steel body with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity and heating elementcapacity 3 ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Note : Old geyser shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill. |
| 106 | Supply and fixing of wall fan 400 mm 230 Volt single phasecomplete all as specified and directed. Note : Old fan shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill. |
| 107 | Supplyand fixing of BLDC Ceiling Fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz complete all as specified and directed. Note : Old fan shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill. |
| 108 | NOTE:- Amount of credit ofRs. 145716.00for retrieved materials is mentioned in Schedule of Credit Page No 28 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
