|
| 1 | Dismantling old feeder pillar boxes and LT pannels any size complete all as specified and as directed by Engineer-in-charge. |
| 2 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire LT panel , 3.15 mm thick factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, sheet Outdoor double door Partially Type Tested Assembly Type (PTTA) LT cubical panel made out ofCRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with TPN PVC sleeved aluminium bus bar of size 250 Amps incld. angle iron base frame of suitable size. Including Panel mounted/grouted on 150 mm thick PCC (1:4:8) type D2 1 Mtr above ground level and with 500 mm offsets on all 04 sides of the panel complete and including spiral HDPE pipes for all cables under the PCC of panel inclusive of following in accessories fitted in the panel complete all as specified and directed:-(A). INCOMING: - (i) MCCB 160 Amps ,415 V 3 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable , Microprocessor release type including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos(B).OUTGOING: - (i) MCCB 125 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu & spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos(ii) MCCB 100 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu &including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos(iii) MCB TPN 32 Amp - 01 No.(iv) Spare cubicles for expansion as per MCCB 4P- 01 Nos.(v) LED indicators - R/Y/B 240 V AC - 03 Sets of 03 Nos.( for incoming & 2 outgoings)(vi) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as and including suitable size CTs (set of 3) - 01 No. (for Incoming feeder) (vii) MCB SP \"C\" series 10kA 6-32 Amps as protection for LED lampsand multifunction meter - 2 Nos. (viii) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc. |
| 3 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire LT panel , 3.15 mm thick factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, sheet Outdoor double door Partially Type Tested Assembly Type (PTTA) LT cubical panel made out ofCRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with TPN PVC sleeved aluminium bus bar of size 250 Amps incld. angle iron base frame of suitable size. Including Panel mounted/grouted on 150 mm thick PCC (1:4:8) type D2 1 Mtr above ground level and with 500 mm offsets on all 04 sides of the panel complete and including spiral HDPE pipes for all cables under the PCC of panel inclusive of following in accessories fitted in the panel complete all as specified and directed:-A.INCOMING:- (i) MCCB 125 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu & spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 NosB.OUTGOING :-(i) MCCB 100 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu &including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos(ii) MCB SPN 32 Amp - 04 No. (iii) Spare cubicles for expansion as per MCCB 4P- 01 Nos.(iii) LED indicators - R/Y/B 240 V AC - 02 Sets of 03 Nos. For incoming & outgoing(iv) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as per L&T make, Cat No. - WL440010OOOO and including suitable size CTs (set of 3) - 01 No. (01 NO. for Incoming feeder) (v) MCB SP \"C\" series 10kA 60-32 Amps as protection for LED lamps and multifunction meter - 2 Nos. (vi) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc. |
| 4 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire LT panel , 3.15 mm thick factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, sheet Outdoor double door Partially Type Tested Assembly Type (PTTA) LT cubical panel made out ofCRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with TPN PVC sleeved aluminium bus bar of size 250 Amps incld. angle iron base frame of suitable size. Including Panel mounted/grouted on 150 mm thick PCC (1:4:8) type D2 1 Mtr above ground level and with 500 mm offsets on all 04 sides of the panel complete and including spiral HDPE pipes for all cables under the PCC of panel inclusive of following in accessories fitted in the panel complete all as specified and directed:-(A).INCOMING :- (i) MCCB 100 Amps ,415 V 3 pole 16 KA 50 Hz with Ics =100% Icu &including spreader terminals - set of 04 and direct rotary handle -01No as per OEM specifications- 01 Nos(B). OUTGOING :- (i) MCCB 63 amp 16kA, 415V3 pole with Ics =100% Icu & including spreader terminals - set of 03 and direct rotary handle - 01 No,all as per OEM specifications - 01 No.(ii) MCB SPN 32 Amp - 04 No.(iii) Spare cubicles for expansion as per MCCB 4P - 01 Nos.(iv) LED indicators - R/Y/B 240 V AC - 02 Sets of 03 Nos. per incoming & outgoing(v) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, including CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as per L&T make, Cat No. - WL440010OOOO and including suitable size CTs (set of 3) - 01 No. (01 NO. for Incoming feed(vi) MCB SP \"C\" series 10kA 60-32 Amps as protection for LED lampsand multifunction meter - 2 Nos.(vii) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc. |
| 5 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire LT panel , 3.15 mm thick factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, sheet Outdoor double door Partially Type Tested Assembly Type (PTTA) LT cubical panel made out ofCRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with TPN PVC sleeved aluminium bus bar of size 250 Amps incld. angle iron base frame of suitable size. Including Panel mounted/grouted on 150 mm thick PCC (1:4:8) type D2 1 Mtr above ground level and with 500 mm offsets on all 04 sides of the panel complete and including spiral HDPE pipes for all cables under the PCC of panel inclusive of following in accessories fitted in the panel complete all as specified and directed:-(A). INCOMING :- (i) MCCB 63 amp 16kA, 415V3 pole with Ics =100% Icu & including spreader terminals - set of 03 and direct rotary handle - 01 No, all as per OEM specifications - 01 No.(B). OUTGOING :- (i) MCBSPN 32 Amp - 03 No(iii) LED indicators - R/Y/B 240 V AC - 03 Sets of 03 Nos. per incoming & outgoing(iv) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all and including suitable size CTs (set of 3) - 01 No. (01 NO. for Incoming feeder) (v) MCB SP \"C\" series 10kA 6-32 Amps as protection for LED lampsand multifunction meter - 2 Nos(vi) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc. |
| 6 | Supplying, installing, testing and commissioning of 415 Volts 3 Phase 4 Wire LT panel , 3.15 mm thick factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, sheet Outdoor double door Partially Type Tested Assembly Type (PTTA) LT cubical panel made out ofCRCA MS sheet duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with TPN PVC sleeved aluminium bus bar of size 250 Amps incld. angle iron base frame of suitable size. Including Panel mounted/grouted on 150 mm thick PCC (1:4:8) type D2 1 Mtr above ground level and with 500 mm offsets on all 04 sides of the panel complete and including spiral HDPE pipes for all cables under the PCC of panel inclusive of following in accessories fitted in the panel complete all as specified and directed:-(A). INCOMING :- (i) MCCB 63 amp 16kA, 415V3 pole with Ics =100% Icu & including spreader terminals - set of 03 and direct rotary handle - 01 No,, all as per OEM specifications - 01 No. (B).OUTGOING :- (i) MCB SPN 32 Amp - 05 No.(ii) Spare cubicles for expansion as per MCCB 4P Amps - 01 Nos.(iii) LED indicators - R/Y/B 240 V AC - 03 Sets of 03 Nos. per incoming & outgoing(iv) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all and including suitable size CTs (set of 3) - 01 No. (01 NO. for Incoming feeder) (v) MCB SP \"C\" series 10kA 60-32 Amps as protection for LED lamps and multifunction meter - 2 Nos. (vi) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc. |
| 7 | Material and labour for 40 mm bore galvanized steel tubing light garde (ISI marked) forprotection of cable fixed to pole/walls or laid in floors, road and duct crossingwith all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and as directed |
| 8 | Material and labour for 80 mm bore galvanized steel tubing light garde (ISI marked) forprotection of cable fixed to pole/walls or laid in floors, road and duct crossingwith all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and as directed |
| 9 | Dismantling concrete poles/ struts, any size complete all as specified and as directed |
| 10 | Dismantling ofcross arms of MS channel or angle etc complete setting aside for reuse within 50 m or remove from site complete all as specified and as directed. |
| 11 | Dismantling insulators any type any size complete all as specified and as directed. |
| 12 | Dismantling of ACSR or AAC conductor any size and any type complete all as specified and as directed . |
| 13 | Taking down old unserviceable cables/ service cableof anysize etc from poles/struts/walls/ buildings etccomplete all as specified and as directed. |
| 14 | Supply,laying/fixing, jointing,testing and commissioning XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core laid in trenches/ducts/pipes/fixed on wall/pole etc complete all as specified and as directed. |
| 15 | Supply,laying/fixing, jointing,testing and commissioning XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm 3.5 core laid in trenches/ducts/pipes/fixed on wall/pole etc complete all as specified and as directed. |
| 16 | Supply,laying/fixing, jointing,testing and commissioning XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sqmm 3.5 core laid in trenches/ducts/pipes/fixed on wall/pole etc complete all as specified and as directed. |
| 17 | Supply,laying/fixing, jointing,testing and commissioning XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 sqmm 3.5 core laid in trenches/ducts/pipes/fixed on wall/pole etc complete all as specified and as directed. Note for serial item NO.14 to 17,Excavation and Earth worK,sand cushnioning, PCC cover shall be measured and paid separately under respective items of this schedule. |
| 18 | Excavation in trenches in soft/loose soil n exc 1.5m wide and not Exc1.5m deep and getting out including forming bottom surfaces to required level or slope for taking out old cables,brick/PCC tiles coverscomplete allspecified and all as directed . |
| 19 | Material and labour filling, spreading dry sand in trenches in layers for cushioningto under ground cable for protection of cable, 8cm deep before layingand 15 cm after laying the cable and punned to provide required cover complete all as specified and as directed.Note :- For payment Punned depth shall only be measured. |
| 20 | Material and labour for laying in thenches unreinforced cement concrete cable cover ISI Marked IS-5820( Latest Edition) , class LV, type 1, flat size 250mm x 150mm x 40mm for protection of cable complete all as specified and as directed. |
| 21 | Removal of surplus excavated soil to a distance exc 50 m but not exc in 100 m and deposited where directed at a level n\"exc 50 m above the starting point complete all as specified and as directed. |
| 22 | Returning filling in soft/ loose soil in trenches including spreading, leveling watering and well ramming in 25mm thick layer complete all as specified and as specified. |
| 23 | Material and labour for cement concrete 1:4:8 type D- 2 using 40mm graded crushed stone aggregate in foundation, filling & mass concrete for poles/struts/stays assembly etc complete all as specified and as directed. |
| 24 | Material and labour for cement concrete 1:2:4 type B - 1 using 20mm graded crushed stone aggregate in coping, pedestal to poles including necessary frame work finishing the expossed surface even and smooth complete all as specified and as directed. |
| 25 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter deep below normal ground level connected to galvanized earth strip of size 32x 6 mm, 7.5m long means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR part I connecting to earthing test point and testing on completion with and including PCC pit in mix 1:3:6 type c1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 6mm dia MS bars 3 Nos both ways with lifting book made out of 6mm dia bar, watering arrangement with funnel and wire mesh and 20mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete including removing the old unserviceable earthing all as specified and as directed by Engineer-in-Charge |
| 26 | Material and labour for LT cable route indicator/made of RCC M-20 grade with 4 x 6mm round bar with 3 rings of size 450x300x100 mmthick duly embossed of letter likt HT/LT cable including painting with tint as directed with proper finishing and smoothing the surface and embedding of cable rote indicators in foundation concrete PCC 1:2:4 type B-1 complete all as specified and as directed by Engneer-in-charge. |
