|
| 1 | Spl Repairs to Passanger Lift No- 01 and Lift No- 02 of capacity 1360 Kg for 20 persons of make OTIS installed at Phase -I bldg of MH Khadki with complete overhauling and repairs/replacement of following major parts and accessories :-Note :- The rates are inclusive of any civil work involved in repair/ replacement of the above lifts. |
| 2 | Supply and fix in repairs new control panel with control wiring up to mid way junction comprising with multiple micro controlled programmed chip based link to each other in net work, thermal over load protection comprising with variable voltage, variable frequency drive (VVVF) Make: Yaskawa/Fuji/Icon/INVT or equivalent in Schneider suitable up to 20 HP motor based on micro controller and controlled by pulse with modulation complete with all safety devices such as over current protection, auto phase reverse etc including proper connection with proper lugs, terminal connectors screws and motor connection with galvanished sheet trucking 24 SWG including wiring of main motor with suitable size of stranded copper cable etc. - 01 Job for each lift |
| 3 | M & L in repairs for new shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 volts grade 0.75 Sqmm/1 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire as recommended by OEM duly bunched with wire binding locking strip, drawing through in and including galvanished sheet metal trucking of 24 SWG up to ground floor in hoist for control to all function including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch all as specified and directed by the Engineer-in-Charge. - 01 Job |
| 4 | Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin & providing new main steel wire rope 16 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley & car cabin with clamps, nuts, bolts & washer etc complete all as specified and direct by Engineer-in-Charge. Make: Usha Martin - 220 RM |
| 5 | Disconnecting and taking out old/unserviceable governer rope & providing new steel wire rope of dia 8 mm (8/19 construction) ungalvanished including necessary connection with pully in machine room and shaft pit complete with clamps, nuts bolts, and washers etc for G+3 storey buildings for passenger lifts comlete all as specifed and directed by engnineer-in-charge. Make : Usha Martin - 100 RM |
| 6 | Taking down unserviceable flat/round travelling cable from hoist way, supply and fixing travelling cable, from hoist way PVC insulated 16 core with stranded copper conductor, 1100 volts grade of size 0.75 Sqmm conforming to relevant IS in and including crimping with lugs of appropriate thimbles in building G+3 storey lifts complete all as specified and directed by Engineer-in-Charge. Make: Polycab/Finolex - 01 Job |
| 7 | Dismantling and taking out unserviceable Old landing push button box along with illuminated call button with control wiring and supply and fix landing push button box complete with stainless face plate 1.5 mm thick having 02 pushbutonand combined digital postionindicator with arrow indicator complete incliding cutting walls for fixing of push button unit including making good to disturbed wall surface for G+3 storey building complete all asdirectedby Engineer -in-Charge. |
| 8 | Dismantling and taking out old unserviceable landing door from vairous floors & supply and fixing new landing door comprise of 02 nos power operated auto centre opening by horizontal sliding stainless steel panel of 18 SWG flush type complete with door headers suitable for 20 passengers lifts including necessary cutting opening in masonory work & making good the disturbed surface to match with the existing complete in G+3 building complete all as specified and directed by Engineer-in-Charge. - 01 No (Ground Floor)for each lift |
| 9 | Dismantling and taking out Old Gear box assembly from main machine and Supply & Fix, testing and commissioning of new gear box assy with motor of capacity 15 KW (as recommended by OEM) with all accessories and including suitable size of gear box, bearings, shafts and gear wheels complete all as per the OEMs design and recommendation and as specified and directed by engineer-in-charge. for G+3 storey building.- 01 Job for each lift |
| 10 | Replacement of unserviceable ARDcontrol system commissioning and testing of new ARD system suitableupto 15 KW motor including wiring with connected items in existingG+3 storey building 20 passenger lift 415 V, 50 Hz, 3 phase with a speed of 0.2 mtr/sec comprising with maintenance free battery of cap 12 V , 26/30 AH, Make: Exide/Amaron to match with the existing capacity motor and controller system complete all as specifieid and directed by Engineer-in-Charge. Make: Adcon/Escon/Monarch .Location Lift No 1 & 2 MH Khadki. - 01 Job for each lift |
| 11 | Dismantling/Taking down and Design, Supply, installation, testing and commissioning of new car cabin with platform alongwith 5 mm thick aluminium chequred plate, with aluminium sil & centre auto door in SS hairline finish of 18 gauge with car door track, alongwith SS false ceiling in (lift) as per existing size MH hospital building G+3 storey building all as specified and directed by Engineer-in-Charge. Location Lift No 1 & 2 MH Khadki.- 01 Job for each lift(a) Type of car cabin: as per existing (b ) Load capacity-1360 Kg (20 Persons)(c)Car door type - Centre opening, sliding type, hair line of 18 SWG(d) Door opening inside: As per existing(e) Car enclosure: Standard manufacturing with MS frame & SS panels, with false ceiling with 04 Nos LED fitting on ceiling and concealed fan with fan grill.(f) 3 D infra red sensor for safety edge of door for entire height. (g) Fixing of new COP with overload button and digital car position indicator in COP.(h) Safety insturction board in car(j) Do\"s and Don’t\"s board in car(k) Emergency telephone numbers board in car(l) Flooring - aluminium chequred plate 5 mm thick complete(m) Replacement of PCB card, relay with control wiring for G+3 Storey building. (n) Replacement of over load sensor of capacity 2000 kg |
| 12 | Supplyand fix in repairs hooter with emergency call announciator working on 12 Volts with audibility 90 db @ 1 M distance Make: Kherajwith complete accessories like push button switches, wiring and rechargeable batteries Make :- Exide/Amaron along with box including connecting cables all as specified and directed by Engineer-in-Charge. - 01 Job for each lift |
| 13 | Supplyand fix in repairs limit switch patta with all connected accessories complete all as specified and directed by Engineer-in-Charge. - 06 Nos (for Lift No 1 & 2 MH Khadki) Note :-(i)The work is to be carried out by the authorised OEM of the Lifts.(ii)The rates are inclusive of all the civil work involved in dismantling and fixing Doors, Car cabins etc. (iii) Any damage to govt property will be beared by the contractor and is to be make good at his own cost (iv)Contractor has to visit the site along with the OEM befour quoting the tender, no dispute/conversation/suggestions will be entertained on later stage only decision of Engr-in-charge/GE will be final.(v)The rates are inclusive of cleaning of Lift well and servicing of buffers , counter weights and counter weight guides etc. |
