|
| 1 | Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil, including removal of the rubish upto 50m, complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified. |
| 3 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete etc., complete all as specified and as directed. |
| 4 | M&L for Reinforced Cement Concrete M–25 (Design Mix) with admixtures, as in Foundations including Rafts, Footings, Foundation Beams, Plinth Beams, Bases for Columns etc., complete all as specified and as directed. |
| 5 | M&L for Reinforced Cement Concrete M–25 (Design Mix) with admixtures, as in Columns, Pillars, Piers, Posts & Struts etc., complete all as specified and as directed. |
| 6 | M&L for Reinforced Cement Concrete M–25 (Design Mix) with admixtures, as in floor beams, roof beams, cantilevers, bressumers, middle beams, lintels over 1.5m span and lintel bands etc., complete all as specified and as directed. |
| 7 | Steel formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed. |
| 8 | Steel formwork to sides and soffits of floor or roof beams, cantilevers, bressummers, lintels, shelves, lintel beams, RCC bands, complete all as specified. |
| 9 | Steel formwork to sides of pillars, posts, struts, columns, stanchions and the like, for fair finished surfaces of concrete, complete all as specified and as directed. |
| 10 | M&L for Reinforcement using TMT bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 11 | M&L for Reinforcement using TMT bars of Grade Fe-500D of 8mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified. |
| 12 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, complete all as specified and as directed. |
| 13 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, complete all as specified and as directed. |
| 14 | M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 with and including mixed with water proofing compound @2% of weight of cement and finish the surface even and smooth without using extra cement, complete all as specified and as directed. Note: Quoted rate shall be inclusive of water proofing compound. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type of soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 16 | Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 17 | M&L for Moorum/Red bajri filling brought from out side MD land including filling in floors or pavings or in foundations laid in layers n.exc. 15cm thick spread, levelled and rammed including watering, complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 18 | M&L for Hardcore of gauge not exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 19 | M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base, complete all as specified and as directed. |
| 20 | M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.11 Sq.m. but n. exc. 0.18Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed. |
| 21 | M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.36Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3, complete all as specified. |
| 22 | S&F Machine cut Granite stone 18-20mm thick (of any type), table rubbed & polished, as in skirting, dado, steps, window cills, cooking platform and the like, laid over and including 20mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, complete all as specifed and as directed. |
| 23 | S&F Steel ventilator with top hung shutter with and including hinges, steel peg stay and all fittings, complete all as specified. |
| 24 | M&L for Rolled Mild steel as in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel, hollow or flat sections ) including distance pieces, cleats etc., conforming to grade Fe 410-W Gde E - 250 quality \"A\", complete all as specified and as directed. |
| 25 | M&L Framed work such as grills, gratings, rungs etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railings, and similar work confirming to Gde Fe-290 Gde E-165, complete all as specified and as directed. |
| 26 | M&L for Rolled Mild steel sections for hold fasts, wind tiles and similar articles, conforming to grade Fe 290-W Gde E - 165, complete all as specified and as directed. |
| 27 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 28 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 29 | M&L for Preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: Quoted rate shall be inclusive of necessary scaffolding/shoring and other safety measures to be undertaken during execution of work. |
| 30 | M&L for Preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: Quoted rate shall be inclusive of necessary scaffolding/shoring and other safety measures to be undertaken during execution of work. |
| 31 | M&L for applying three coats of white wash on newly plastered surfaces of walls with and including preparation of new surfaces, complete as specified and as directed. |
| 32 | M&L for applying Two coats of cement base paint (white or tinted) on newly plastered surfaces of walls with and including preparation of surfaces, complete as specified and as directed. |
| 33 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frame/ Chowkhat of size 45mm x 70mm with virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibbers (wood powder/ rice husk/ wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) with mitre joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, and fixed in position with andincluding MS hold fast/lugs/SS dash fasteners as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 34 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-in-Charge. |
| 35 | S&F Stainless Steel butt hinges, medium weight, 100mm size, ISI marked, complete all as specified andas directed. |
| 36 | S&F 150mm long Extruded aluminium alloy \"D\" type handles, fabricated type, anodised complete all as specified and as directed. |
| 37 | S&F 150mm long Extruded aluminium alloy \"D\" type handles, fabricated type, anodised complete all as specified and as directed. |
| 38 | S&F Aluminiumanodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified andall as directed. |
| 39 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), ISI Marked, three layered, 1000 Litres capacity, hoisted and fixed in position all as specified in SSR Part I, with and including 25mm dia PTMT ball valve, complete all as specified. |
| 40 | M&L for 75mm thick plain cement concrete 1:3:6type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, complete all as specified and as directed. |
| 41 | S&F 600mm x 450mm bevelled edge mirror 6mm thick of selected quality glass mounted on 6mm thick commercial plywood/ AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror, complete all as specified and as directed. |
| 42 | S&F Minimum 4.0mm thick sheet glass of ordinary quality of approved brand fixed in position with and including PVC/Neoprene gasket for glazing, glazing clips in doors, windows, partitions etc., as in squares exceeding 0.50 Sqm in each pane etc., with all required accessories, complete all as specified and as directed by Engineer-in-charge. |
| 43 | S&F Vitreous china Wash down water closet pan EWC (Pedestal pattern), white with\"P\"or \"S\" trap étc,(excluding flushing cistern and flush pipe) including plastic water closet seat cover closed pattern with flat bottom cover, mild steel chromium plated or aluminised hinging device, fixing bolts etc, complete all as specified and as directed. |
| 44 | S&F Vitreous china squatting pan 580mm x 440mm (Orissa pattern), white with\"P\"or \"S\" trap étc,(excluding flushing cistern and flush pipe) including integral foot rest, fixing with cement concrete bedding, complete all as specified and as directed. |
| 45 | S&F ABS body Health faucet, CP with 1.2m long flexible type steel tube and wall hook, complete all as specified.Make: Jaquar Model No. ALD-573 or its equivalent as specified here in after. |
| 46 | S&F Brass 2 Way Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. |
| 47 | S&F Vitreous china white half stall type urinal with grating and unions for discharge pipe line including 32 mm dia PVC polythene pipe of suitable length from the urinal to trap of below including necessary jointing,with and including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified.Make: JAQUAR Model no URS-WHT 0701 or its equivalent all as specified and directed. |
| 48 | M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including supply & fixing powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface,complete all as specified and as directed. |
| 49 | S&F uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed. |
| 50 | S&F uPVC (SWR) Gully trap 125/110mmsize, setting and jointing with solvent, complete all as specified and as directed. |
| 51 | S&F uPVC (SWR) Vent Cowl suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed. |
| 52 | S&F PVC connections 15 mm size with PTMT nuts 600mm long, completeall as specified and as directed. |
| 53 | S&F Vitreous china wash hand basin, Oval Type, white, of size 550x440mm, with and including waste coupling and porcelain stopper, fixing brackets, cutting for and pinning in ends of brackets, 40mm dia CP brass waste fittings, complete all as specified and as directed. |
| 54 | S&F Tubular Towel rail 20mm dia, 600mm long, D type, Brass chromium plated, fixed with CP brass screws, wooden / plastic cleats, completed all as specified. |
| 55 | S&F PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe, fixed with CP brass screws, complete all as specified and as directed. |
| 56 | S&F Unplasticised PVC (uPVC) pipe of 20mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, complete all as specified and as directed. |
| 57 | S&F Unplasticised PVC (uPVC) pipe of 25mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, complete all as specified and as directed. |
| 58 | S&F Unplasticised PVC (uPVC) pipe of 15mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, complete all as specified and as directed. |
| 59 | S&F Stop Valve, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. |
| 60 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends, suitable for iron pipe of 25mm bore, complete all as specified and as directed. |
| 61 | S&F 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 62 | S&F Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. |
| 63 | S&F PVC connections 15 mm size with PTMT nuts 450mm long, completeall as specified and as directed. |
| 64 | S&F 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed. |
| 65 | S&F uPVC (SWR) junction single \"T\" equal or unequal, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed. |
| 66 | S&F PVC Flexible pipe of minimum 900mm long (waste pipe) 32mm bore dia, suitable for 32mm bore waste coupling of sink, WHB, etc., complete all as specified. |
| 67 | M&L for PCC type B0 [1:2:4] using 12.50mm graded granite stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, complete all as specified and as directed. |
| 68 | M&L for Rubber coated chequered cement concrete coloured tiles 23-25mm thick, of approved shape and size, as in floor / path, set, jointed and pointed in neat cement slurry with grey cement and pigment, glosy finish on top, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified. |
| 69 | S&F Galvanised steel water tubing 25mm bore dia, medium grade, conforming to IS:1239 (Part I) with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors and including testing, complete all as specified and as directed. |
| 70 | M&L for 150mm dia Reinforced Concrete Pipe NP2, with bends, collars tec., laid in trenches and jointed, with and including cement concrete bed PCC 1:3:6, type C2 (using 40mm graded granite stone aggregate), forming cradles, laid, packing & haunching sides, laid and tested, complete all as specified and as directed. |
| 71 | M&L for PCC 1:2:4 type B1 (using 20mm graded granite stone aggregate) as in surface channels and drains, complete all as specified and as directed. |
| 72 | M&L for Forming extra fair finished drain or channel of 25cm inner grith or width in cement concrete using extra cement with and including forming moulds / stopped ends etc., complete all as specified. |
| 73 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, complete all as specified and as directed. |
| 74 | M&L for Precast RCC (1:2:4), Type B-1, using 20 mm graded stone aggregate as in precast cover slabs, set in CM 1:4, complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately. |
| 75 | M&L for Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm bore dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, complete all as specified. |
| 76 | M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including PVC concealed rigid conduit (minimum 20mm) meadium grade ISI marked, with accessories, junction boxes, tees, terminal boxes with and including factory made Metal boxes with modular top cover plates with frame for modular switches & sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. |
| 77 | All as per Serial Item No. 76 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified. |
| 78 | All as per Serial Item No. 76 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified. |
| 79 | S&F Modular switch 1 way 5/6Amp, 1 Module, 240 Volts, complete all as specified and as directed. |
| 80 | S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed. |
| 81 | S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module,240 Volts, complete all as specified and as directed. |
| 82 | S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed. |
| 83 | S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed. |
| 84 | S&F LED Professional Luminaries batten type fitting 1X20watt, 220Volt, >120 lum/W, PF>0.95, AC, integrated type batten and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. |
| 85 | S&F LED Building Security light fitting 35Watts, 230 volts, >120lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with LED lamp, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. |
| 86 | S&F Exhaust fan, steel body, AC single phase, 230Volt, 300mm sweep, heavy duty with blades, frame, louvers, wire mesh with all accessories and necessary fixing on 12mm thick plywood on wall, complete all as specified and as directed. |
| 87 | S&F Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 230 volt, 8Way, double door, IP-42 protection with 200 Amp rated copper bus bar 415Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified. |
| 88 | S&F MCB SPN 32 to 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 89 | S&F MCB SP 06 to 32Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 90 | Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric FR power cable [heavy duty] of size 4.0Core x 10.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., complete all as specified. Note: Excavation & earth work & cable protection pipe shall be measured and paid separately under respective items. |
| 91 | M&L for Double wall corrugated high density polymer (SDR 17) of ISI marked 63mm outer dia and 50mm inner dia including necessary fittings like couplers, bends, end caps etc., with ISI marked (IS 14930- 2001 ), laid in trenches / floors & fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables / road crossings etc., complete all as specified and as directed. |
| 92 | M&L Earthing complete with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below GL) with top edge of the plate not less than 1.5 metres below normal GL, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. |
