Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Routine maintenance ofSTP (Sewage treatment Plant)installed at Vandana and Vishakha complex havingcapacity of treatment 200 KL/day, maintenance of entiresystem, filtration/ dosingsystem carrying out the routine maintenance recommended by the manufacturer for daily, weekly, monthly and quarterly including repairs/ replacement of parts such as bearings, repairs of pumps, filters, welding of cracked/ broken any mild steel items/ foundation,pipes and their fittings, gasket, nut bolts andremoving of blocking/overflow systems,LT panel boards etc completeall as specified & directed by Engineer-in-Chargethe following items : (a) Fine bar screen & Oil Grease tank- 01 Nos(b) Oil and grease trap chamber -01 Nos(c) Equalization tank - 01 (d) ANOXIC chamber-01,(e) Clarified water tank -01, (f) Treated water tank -01 (g) Sludge Holding tank -01 (h) MBBR Tank -01, (j) Raw sewage pump - 02, (k) Sewage reccee pump -02 (l) Filter feed pump -02 (m) Screw pump -02, (n) Treated water pump -02(o) Air blower -02 and all butter fly valve, pipe line inside STP and LT Panel - 02 Nos, complete dosing system including cleaning of STP area daily as directed .(p) The record of lab testing of treated water samples will also maintained in similar way.The cost of same is deemed in the unit rate quoted& the reportsubmitted to the Engineer-in -Charge at every month. |
| 2 | Taking down old rusted and damagedblower filter and supply and fixing blowerfilteras perexistingsizeand sampleat site all as directed. |
| 3 | Supply and usesodium hypochlorite ,( as per Particular specification), liquid specification include a clear, pale yellow- green appearance ,free alkali and free sodium carbonate , in sealed HDPE container of 100% concentration of standard capacity all as specified and directed. [Note : Necessary chemicals and testing kit (residual chlorine & PH) for testing of water samples at lab shall be provided by the Contractor and cost of the same shall be deemedin the unit rate quoted.] |
| 4 | Supply and use chemicalDWPE (Dewatering polyelectrolyte) of 100% concentration of standard grade complete all as specified and directed. |
| 5 | Cleaning of RCCsewagefine bar screen chamber of size 1.2m x 0.5 m x 1.0m including washing removing the scalesdust , removing of sludge etc including plugging the insects dusting washing, internal/ external paint complete all as all as specified & directed. |
| 6 | Cleaning of RCCsewage Oil and Grease trap chamber of size 1.75m x 1.2 m x 2.5 m including washing removing the scalesdust , removing of sludge etc including plugging the insects dusting washing, internal/ external paint complete all as all as specified & directed. |
| 7 | Cleaning of RCC ANOX IC tank of size 2.1 m x 2.1m x 4.5 m including washing removing the scalesdust , removing of sludge etc including plugging the insets dusting washing, internal/ external paint complete all as all as specified & directed |
| 8 | Cleaning of treated water tank of size 4.0m x 3.7 m x 2.5 m by rubbing, washing removing the scalesdust etc including plugging the insets dusting washing and painting complete all as specified and directed |
| 9 | Cleaning of RCC sludge holding tank of size 1.7 m x 6.0 m x 1.5m by rubbing, washing removing the scalesdust etc including plugging the insets dusting washing and painting complete all as specified and directed |
| 10 | Repair and maintenance of filter press with replacement of filter press cloth and minor parts complete all as specified and directed |
| 11 | Repair/Maintenance toChlorine/DWPE dozing system assembly with chlorine injector dozing pump, cleaning, servicing, carrying out minor repairs and testing. [Note : (a) Work is including consumables like cotton waste cloth etc. (b)Parts and spares requied to be replaced make it serviceable condition complete.] |
| 12 | Material and labour for rewinding the3 phase sewageelectric motor of capacity 01HP to 03HP capacity, disconnecting the electric connection of motor, earth connections,removing foundation nuts/bolts and removing the monoblock pump/ motor from its existing position to workshop [Note:- following works deemed to be included in the quoted rates.](a) Removing the split case/body cover of motor, seperate stator/rotar and cutting the complete burnt/defective copper winding.(b) Cleaning the stator body complete by rubbing and paper removal all carbons.(c) Insert insulating materials such as insulating paper sleeves.(d) Rewinding the stator with existing size of super enameled copper winding, varnishing and heating up at desired temperature for achieve the particular Ohm resistance.(e) Clean the rotor and assembling in motor. |
| 13 | As per item No 12.00 here in abovebut 5 HP to 7.5 HP motor |
| 14 | As per item No 12.00 here in above but 10 HP to 12.5 HP motor |
| 15 | As per item No 12.00 here in above but 15 HP to 20 HP motor |
| 16 | As per item No 12.00 here in above but 25 HP to 30 HP motor |
| 17 | As per item No 12.00 here in abovebut 40 HP to 60 HP motor |
| 18 | Opening the bottom and top cover of the cylinderical type activated carbon filter and taking out the complete carbon from the vesel.Cleaning the complete internal surface area of the plant with wire brush,removing all the deposited sludge,mud dirt etc and cleaning the vesel with water.Washing complete sand filter media, screening with suitable size mesh stainer removing all the vegetation and making free from unwanted material.The scope of work includes the following :-(a)Supply and filling New/Fresh activated carbon- 2000 Kg or (as required to fill)(b) Supply and fix 8 mm thick rubber fiber gasket joints with nuts,washer, as existing size at top and botton cover of plate.(c) Painting complete external surface of filter media, valves and connecting lines after completion of work.(d)Fixing of top and botton cover testing and commissioning complete. |
| 19 | Openig the bottom and top cover of the cylinderical type sand pressure feed filtration plant and taking out the complete filter media from the vesel.Cleaning the complete internal surface area of the plant with wire brush,removing all the deposited sludge,mud dirt etc and cleaning the vessel with water.Washing complete sand filter media, screening with suitable size mesh stainer removing all the vegetation and making free from unwanted material.The scope of work includes the following :-(a) Filling only washed sand filter mdia into the vessel - 300 Kgs(b) Supply and filling New/Fresh barakar sand filter media into the plant- (c) Supply and fix 8 mm thick rubber fiber gasket joints with nuts,washer, as existing size at top and bottom cover of plate.(d) Painting complete external surface of filter media, valves and connecting lines after completion of work.(e) Fixing of top and botton cover testing and commissioning complete |
| 20 | Supply and fix in replacement of unserviceable / wornout \"V\" belt as per existing type and size of Air BlowerSludge sump complete all as specified and directed. |
| 21 | S&F in repair overload relay assembly for 5 to 10 HP pump set complete all as specified and directed |
| 22 | Supply and fix power contactor MNX-A1suitable for 5 to 12.5 HP pump set including taking down old complete all as specified and directed. |
| 23 | Removing old unserviceable power contactor MNX A2andsupply & fixing new power contactor MNX A2all as specified & directed. |
| 24 | supply& fixAuxilary contactor MNX 0 , 22E suitable for 5 to 12.5 HP pump set including taking down old complete all as specified and directed. |
| 25 | M&L for preparation of each RCC tankof capacity 0.5 Lakh ltr plastered surfaces of wall and applying two coats of oil bound distemperincluding primer all as specified and directed. |
| 26 | Repair to unserviceable sluice valve of size80 mm to 150 mm dia.Opening the nut,boltsboth side flanged ,after taking downunscrew thetop coverand taking out the spindle , gate with check nut and with fix new spindle set alongwith new rubber gasket if requirede at site complete all asspecified & directed. |
| 27 | Taking down oldsubmersible cablecopper conductor and Supply & fixing flat type 2.5 sqmm 3 core complete all asspecified & directed. |
| 28 | Taking down old unserviceable submersible starter and supply and fixing 3 Phase, 3 HP submersible motor straterin sheetsteel enclosure fully overload protectionwith all accessories complete all asspecified & directed. |
| 29 | Material and labour for attending Raw water supply complaints and rectification as mentioned below here in afterInternal complaint (in side Room) Including Flush tank Cleaning 2 nos[Note :- for item no 29.00 to 33.00(a) Scaffolading if any requiredduring the progress of work the contractor shall provide the same with out any extra cost to the department the rates quoted shall bedeemed inclusive ofthis provision(b) Necessary complaint book shall be provided and maintained by the contractor, complaint slip shallbe deposited very next day in the complaint cell of Vishakha/ Vandana w/s duly signed by the occupant(c) Rates for small fittings and parts are deemed to be included in item rate however pipes, valves, PVC connection shall be measured and paid for separately under relevent items of schedules.] |
| 30 | Ditto as per item No 29.00 here in above but External complaint upto 4th floor |
| 31 | Ditto as per item No 29.00 here in above but External complaint upto 8th floor |
| 32 | Ditto as per item No 29.00 here in above but External complaint upto 12th floor |
| 33 | Ditto as per item No 29.00 here in above but External complaintupto 16th floor |
| 34 | Supply and fix25 mm bore steel water tubing galvanised medium grade (ISI Marked) of following size, with all fitting fixed complete to walls and ceilings or laid in floor/wall/ceiling (in high rise building including scafolding) including taking down old complete all as specified and directed . |
| 35 | Supply and fix in repair gun metal gate valve 25 mm bore,ISI marked with iron wheel head, screwed both ends for GI pipe of following sizes, with union, (ISI Marked) fixed in existing line and in position complete all as specified and directed . |
| 36 | Supply and fix in repair gun metal gate valve 20 mm bore, ,ISI marked with iron wheel head, screwed both ends for GI pipe of following sizes, with union, (ISI Marked) fixed in existing line and in position complete all as specified and directed. |
| 37 | Supply and fix in repair gun metal gate valve 15 mm bore, ,ISI marked with iron wheel head, screwed both ends for GI pipe of following sizes, with union, (ISI Marked) fixed in existing line and in position complete all as specified and directed. |
| 38 | Supply andfixin repairs 15 mm bore angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union.all as specified and directed |
| 39 | Supply and Fix in repairsPVCValveless, syphonic action type,flushing cistern low level all accesories complete all as specified and directed. |
| 40 | Supply and fix in repair 450 mm long PVC connectors with brass adapters, washers etc complete all as specified and directed |
| 41 | Supply and fixin repair 15 mm boreconcealed stop valvescrewed downforGI pipe complete all as specified and directed. . |
| 42 | Supply and fixin repair15 mm bore stop valve screwed downforGI pipecomplete all as specified and directed . |
| 43 | Material and Labour for cleaning of GI pipes by opening of fittings, removing mud, sludge, etcand refixing as stated above for pipes of size.25 mm bore[NOTE:for item No 44 to 45 for attending compaints contractor has to arrange one qualified Plumber with one Helper daily report to Complaint Cell for repair/replacement of pipe line including plumbing works, attending complaints of leakage, air lock in pipe line ect (including Sunday & holiday) and rates to be included in Unit Rate.] |
| 44 | Ditto as per item no 43.00 here in abobe but 20 mm bore |
| 45 | Ditto as per item no 43.00 here in abobe but 15 mm bore |
| 46 | Earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead strip of 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC 1:2:4 in pit with pre- cast RCC 1:2:4 cover reinforced with XPM not less than 4 Kg Sqm, test pointetc. all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified and directed |
| 47 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant including taking down old post top lantern LED complete with driver and lamp complete all as specified and directed . |
| 48 | M&L for attending underground pipe line leakage complaints of pipe of dia 40 mm to 80 mm upto 2 mtr depth line in any type of soil/ hard standing/ under road including earth work/welding work and labour charges complete all as specified and directed by Engr in Charge. [Note : any pipe/ pipe fittings/rubber packing/any type of joint required for stop the leakage up to 5 mtr length of pipe included in the same rate.] |
| 49 | M&L for attending underground pipe line leakage complaints of pipe of dia 100 mm to 150 mm upto 2 mtr depth line in any type of soil/ hard standing/ under road including earth work/welding work and labour charges complete all as specified and directed by Engr in Charge. [Note : any pipe/ pipe fittings/rubber packing/any type of joint required for stop the leakage up to 5 mtr length of pipe included in the same rate.] |
| 50 | M&L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) for filling in hard standing/ plinth protectionofsemi under tank and suporttomain raw water supply lineallas specified and directed. |
| 51 | Taking out old unserviceable membranes and supply & fix new Reverse Osmosis membrane for RO plant of cap 40000 LPD (as per existing) all as specified and directed. |
| 52 | Taking down old pipe and supply & lay CPVC pipes medium grade with all fittings laid in floors or fixed to walls and ceilings etc of size 32 mm complete all as specified and directed. |
| 53 | Taking down old pipe and supply & lay CPVC pipes medium grade with all fittings laid in floors or fixed to walls and ceilings etc of size 40 mm complete all as specified and directed. |
| 54 | Disconnecting and taking out unserviceable sand core fromfilter vessel and supply fix with new sand core in Filter vessel of RO plant complete to match the existing and connecting up with existing system including all accessories complete all as specified and directed . |
| 55 | Disconnecting and taking out unserviceable carbon media from FRP filter and supply fix with new carbon media for water softner in FRP Filter of RO plant complete to match the existing and connecting up with existing system including all accessories complete all as specified and directed . |
| 56 | Supply only Antiscalant chemical for RO Plant (Make : As approved ) |
| 57 | Supply only cleaning Chemical for RO Plant(Make: As approved ) |
| 58 | Disconnecting and taking out unserviceable multiple valve and supply fix with new multiple valve of RO plant complete to match the existing and connecting up with existing system including all accessories complete all as specified and directed by Engineer-in-Charge.Make :- As approved |
| 59 | Disconnecting and taking out unserviceable FRP Housing ofmembraneand supplyfix with new FRP Housing of membrane for supporting and balanceing existing membrane of RO plant of cpacity 40000 LPD complete to match the existing and connecting up with existing system including all accessories complete all as specified and directed . |
| 60 | Cleaning and painting external surface with cement based paint complete, colour as existingSemi under ground RCCsump of cap 01 lakh ltrs after draining out scraping out bottom and side of wall with wire brush and bleaching powder, removing scaling fungus, flushing thoroughly with clean water, applying on coat of white washing after drying inside, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 20mm size on external surface of wall with white enamel paint over black paint surface all as specified anddirected |
| 61 | Supply and fix in replacementof new butterfly valve of PN 1.0 ofdia 50mmcomplete all as specified and directed |
| 62 | Taking down old leakage carbon media filter vesseland supply and fix carbon filter vessel polyethylene material, volume 450 Ltrs, pressure 10 bar for RO plant of capacity 40000 LPD complete all as specified and directed. |
| 63 | Taking down old leakage sand media filter vesseland supply and fix sand filter vessel polyethylene material, volume 450 Ltrs, pressure 10 bar for RO plant of capacity 40000 LPD complete all as specified and directed . |
| 64 | M & L for dismantling the rusted foundation bed of the motor and pump set, andfabrication of the forundation beds with MS channels angle of the required as per pump set capacity( 5 HP to 10 HP) andduly applying one coat of red oxide primer and two coat of bitumen paint of approved quality and errction the pump and motor testing to the entire satisfaction of Engineer-in-Charge.Note:- (a) However quoted rate is deemed to be included for welding work,nuts, bolts, washer and MS fasteners including Concrete required for foundation |
| 65 | Excavationin trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out soft/loose soil for laying of cable /evection of pole/stay pit excavation/pipe line complete all as specified and directed |
| 66 | Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed |
| 67 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed |
| 68 | M&L for construciton of brick masonry valve pit of size75 x 75 x 75 cm (finished internal dimensions ) and 15 mm thick on internal wall surface finished even and smooth external using extra cement and plasterin cement mortar 1:4and pointedincluding 50 mm thick PCC 1:2:4 type B-1 forcopping and fixing newangle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side openwith 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint over a coat of red oxide primer on steel surface including necessary excavation in any type of soil,complete all as specified and directed. |
| 69 | M&L for construciton of brick masonry valve pit of size105 x 105 x 105 cm (finished internal dimensions ) and 15 mm thick on internal wall surface finished even and smooth external using extra cement and plasterin cement mortar 1:4and pointedincluding 50 mm thick PCC 1:2:4 type B-1 forcopping and fixing newangle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side openwith 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint over a coat of red oxide primer on steel surface including necessary excavation in any type of soil,complete all as specified and directed. |
| 70 | Repair tobroken brick masonry valve pit of approx size 0.75 x 0.75 x 0.75 mtrto 1.1 x 1.1 x 1.1 mtr and remove the old plaster andusingmortor for plaster in in cement mortar internally and painter flush externally as posible and PCC 1:2:4 type B-1 forcopping and providing new MS sheet4 mm thick cover of suitable size made of angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side openwith 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic blackpaint and a coats of red oxide paint on steel surface including necessary excavation in any type of soil, earth work in any type of soil all as specified and directed. |
| 71 | M & L for repair and replacementofrusted /broken rubber packing both side of non return valve of CI body 80/ 100/150mm bore openingboth sideflanged with rubber packing including nuts bolts and wahsers etc complete as directed. |
| 72 | Taking down oldunserveciable power contractor of any make and supply and fix 3 pole power contaractor ML-4 suitable for motor upto 40 HP complete all as specified and directed. Make- as approved, all as specified and directed. |
| 73 | Taking down oldunserveciable power contractor of any make e and supply and fix 3 pole power contaractor ML 6 suitable for motor upto 40 to 70 HP complete all as specified and directed. Make- as approved, all as specified and directed. |
| 74 | Taking down oldunserveciable power contractor of any make and supply and fix 3 pole power contaractor MNX 80 suitable for motor upto 60 HP complete all as specified and directed. Make- as approved, all as specified and directed. |
| 75 | Taking down oldunserveciable power contractor of any make and supply and fix 3 pole power contaractor MNX type suitable for motor upto 40 HP Make- as approved, all as specified and directed. |
| 76 | Cleaning of raw water OHT tanks of capacity 500 to 2000 ltrs in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker or writing with paint on tank showing the date of cleaning complete all as specified and directed |
| 77 | Cleaning of raw water OHT tanks of capacity 2000 to 5000 ltrs in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker or writing with paint on tank showing the date of cleaning complete all as specified and directed |
| 78 | Taking down old unserviceable PVC water tank andSupply & firxingrotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including PTMTfloat valve 200 mm, GI fitting and fixed in positioncomplete all as specified and directed. |
| 79 | Taking down old unserviceable PVC water tank andSupply & firxingrotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including PTMTfloat valve 200 mm, GI fitting and fixed in positioncomplete all as specified and directed. |
| 80 | Taking down old unserviceable PVC water tank andSupply & firxingrotational moulded polyethylene water storage tanks of 2000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including PTMTfloat valve 200 mm, GI fitting and fixed in positioncomplete all as specified and directed. |
| 81 | Taking down old unserviceable PVC water tank andSupply & firxingrotational moulded polyethylene water storage tanks of 3000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including PTMTfloat valve 200 mm, GI fitting and fixed in positioncomplete all as specified and directed. |
| 82 | Taking down old unserviceable PVC water tank andSupply & firxingrotational moulded polyethylene water storage tanks of 5000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including PTMTfloat valve 200 mm, GI fitting and fixed in positioncomplete all as specified and directed. |
| 83 | Supply and fix plastic water tank top cover double lock rotational moulded polyethylene water storage tanks of 500 to 2000 Ltrs capacity to provide complete coverage and protection to the water tank and equipped with a closing lid mechanism ensuring secure sealing complete all as specifed and directed. |
| 84 | Supply and fix plastic water tank top cover double lock rotational moulded polyethylene water storage tanks of 2000 to5000 Ltrs capacity to provide complete coverage and protection to the water tank and equipped with a closing lid mechanism ensuring secure sealing complete all as specifed and directed. |
| 85 | M&L for diisconnecting,taking out existing foot valve of any size from underground tank suction pipe and including cleaning and refixingthe sameinpostion complete all as specified and directed. |
| 86 | S&F in replacement sluice valve flanged type with spindle including rubber, packing materials, nut, bolts and washers with locking arrangementISI marked on body conforming to IS-14846 PN-1.6 of size 80 mmdiacomplete all as specified and directed. |
| 87 | S&F in replacement sluice valve flanged type with spindle including rubber, packing materials, nut, bolts and washers with locking arrangementISI marked on body conforming to IS-14846 PN-1.6 of size 100 mmdiacomplete all as specified and directed. |
| 88 | S&F in replacement sluice valve flanged type with spindle including rubber, packing materials, nut, bolts and washers with locking arrangementISI marked on body conforming to IS-14846 PN-1.6 of size 150 mmdiacomplete all as specified and directed. |
| 89 | S&F in replacement sluice valve flanged type with spindle including rubber, packing materials, nut, bolts and washers with locking arrangementISI marked on body conforming to IS-14846 PN-1.6 of size 200 mmdiacomplete all as specified and directed. |
| 90 | Supply & fixin replacementfootvalve, 50 mm sizeISI marked PN-1.6 pressure rating including all joints with rubber or fibre board, bolts, nuts washers, etccomplete all as specifiedand directed. |
| 91 | Supply & fixin replacementfootvalve, 80 mm sizeISI markedPN-1.6 pressure rating including all joints with rubber or fibre board, bolts, nuts washers, etccomplete all as specifiedand directed. |
| 92 | Supply & fixin replacementfootvalve,100 mm sizeISI marked PN-1.6 pressure rating including all joints with rubber or fibre board, bolts, nuts washers, etccomplete all as specifiedand directed. |
| 93 | Supply & fixin replacementfootvalve,150 mm sizeISI marked PN-1.6 pressure rating including all joints with rubber or fibre board, bolts, nuts washers, etccomplete all as specifiedand directed. |
| 94 | Supply and fixing of water level indicator one Nos of each semi under ground sump with all accessories i.eAngle iron of suitable size including wedlng workwire as required gauge, PVC cane/drum , moving roller ,etcincludingtwo coat of synthetic enamelblack paint front / back side and written/ marking level gauge with white /red paint. ( necessary safety measures and equipment, helmet, ladder, rope, safety belt etc provided bycontractor) , complete all as specified and directed. |
| 95 | M&L for Painting ofCI/GI pipe line 40 mm to 150mminside and out side ofeach pumphouseandall sluice valve, NRV gate valve)with one coat of synthetic enamel black/gray paint of existing colour shadewithspray gun machineand after cleaning and preparation of surfacescomplete all as specified & directed. |
| 96 | Taking down the brokeniron coupling from60 HP to 75 HP motor / pump and fixing the new coupling with cotter pin, rubber pieceand nut bolts in position as per approved makecomplete all as specified and directed. |
| 97 | Taking down the brokeniron coupling from40 HP to 60 HP motor / pump and fixing the new coupling with cotter pin, rubber pieceand nut bolts in position as per approved makecomplete all as specified and directed. |
| 98 | Taking down the brokeniron coupling from5 HP to 30 HP motor / pump and fixing the new coupling with cotter pin, rubber pieceand nut bolts in position as per approved makecomplete all as specified and directed. |
| 99 | Taking down the broken rubber coupling from60 HP to 75 HP motor / pump and fixing the new coupling with cotter pin, rubber pieceand nut bolts in position as per approved makecomplete all as specified and directed. |
| 100 | Taking down the broken rubber coupling from40 HP to 60 HP motor / pump and fixing the new coupling with cotter pin, rubber pieceand nut bolts in position as per approved makecomplete all as specified and directed. |
| 101 | Taking down the broken rubber coupling from05 HP to 300 HP motor / pump and fixing the new coupling with cotter pin, rubber pieceand nut bolts in position as per approved makecomplete all as specified and directed. |
| 102 | Supply & fixing in relacement non return valve (ISI marked) of CI body 80mm to100 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete all as specified and directed. |
| 103 | Supply & fixing in replacement non return valve (ISI marked) of CI body 150mm to 200 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete all as specified and directed. |
| 104 | Supply and fix in replacementFresh water tankcast iron lid, including locking arrangementsblack paint in /out side fixed on RCC water tank on top of buildingcap of tank20000 gallonscapacity complete all as specified and directed. |
| 105 | M&L for disconnectingthe unserviceablepump set of capacity 60 to 75 HP any make fromthe pump foundationafter opening nuts/bolts, transporting from site to workshop, dismantling pump, removing worn out impeller, ball bearing, gasket, and replacementthe unserviceable parts , gland packing, greasing, transporting back to pump house and refixing up on the existing foundation, connecting the electrilc supply to the motror and testing complete to entire satisfaction of Engineer-in-Charge all a speciied and directed.. |
| 106 | All as per item No 105.00 here in before but pump of capacity 40 HP complete all as specified and directed. |
| 107 | All as per item No 105.00 here in before but pump of capacity 30 HP complete all as specified and directed. |
| 108 | All as per item No 105.00here in before but pump of capacity 10/15 HP complete all as specified and directed. |
| 109 | All as per item No 105.00here in before but pump of capacity 5/7.5 HP complete all as specified and directed. |
| 110 | All as per item No 105.00here in before but pump of capacity 2/3 HP complete all as specified and directed. |
| 111 | Material and labour for rewinding the electric motor of capacituy 60HP to 75 HP capacity, disconnecting the electtic connection of motor, earth connections, decoupling motor and pump, removing foundation nuts/bolts and removing the motor from its existing position to workshop (Note:- following workds deemed to be included in the quoted rates.) (a) Removing the split case/body cover of motor, seperate stator/rptar and cutting the complete burnt/defective copper winding.(b) Cleaning the stator body complete by rubbing and paper removal all carbons.(c) Insert insulating materials such as insulating paper sleeves.(d) Rewinding the stator with existing size of super enameled copper winding, varnishing and heaating up at desired temperature for achieve the particular Ohm resistance.(e) Clean the rotor and assembling in motor.(f) Connecting/coupling the motor with pump, connect all electric/earth connection foundation nuts.bolts at its original position and testing on load and complete all as specified and directed. |
| 112 | All as per srl item No. 111 here in before butMotor of capacity 40 HP |
| 113 | All as per srl item No. 111 here in before butMotor of capacity 30 HP |
| 114 | All as per srl item No. 111 here in before butMotor of capacity 10/15 HP |
| 115 | All as per srl item No. 111 here in before butMotor of capacity 2/3 HP |
| 116 | All as per srl item No. 111 here in before butMotor of capacity 0.5/1.5 HP |
| 117 | M & L for dismantling the rusted foundation bed of the motor and pump set, andfabrication of the forundation beds with MS channels angle of the required as per pump set capacity( 40 HP to 75 HP) andduly applying one coat of red oxide primer and two coat of bitumen paint of approved quality and re errection the pump and motor testing to the entire satisfaction of Engineer-in-Charge.[Note:- (a) Quoted rate deemed to be included for welding work,nuts, bolts, washer and MS fasteners including Concrete required for foundation] |
| 118 | M & L for dismantling the rusted foundation bed of the motor and pump set, andfabrication of the forundation beds with MS channels angle of the required as per pump set capacity( 20 HP to 35 HP) andduly applying one coat of red oxide primer and two coat of bitumen paint of approved quality and ieerrction the pump and motor testing to the entire satisfaction of Engineer-in-Charge.[Note:- (a) Quoted rate deemed to be included for welding work,nuts, bolts, washer and MS fasteners including oncrete required for foundation] |
| 119 | Supply & fixing in replacement ofhigh pressure single head gear motored adjustable dosing pump with accessories include lead tubing, connecting nuts, injection check valve, clay weight, ferules etc complete all as specifed and directed. |
| 120 | Supply and Fixing in replacement of dosing system consisting 40 ltr-100 ltr PE/FRP Tank with PE/FRP Lid & level gauge along with agitator with shaft & blade in plastic tank complete all as specified and directed. |
| 121 | Supply only Calcium Hypochlorite (stable bleaching powder/High strength bleaching powder). Dry free flowing and free from lumps, toxic & undersirable substance : should not induce substancesbeyoned acceptable limit as given in IS -10500 (2012) in treated and disiinfcted water, packing from in 40-45 Kg drums is prefrefrable to reduce wfire hazards in places of high ambrient rtemperature , specification as tabulated below :- Charasterestic Unit SpecificationAvailable chlorine % by mass , Min 65stabilityloss of Chlorine on basis 1/15Available chloride , max% by mass min0 Practice size (passing through 99.50 1.70 mm IS sieve) % 6 Water in soluble matter, Max%4sodium chloride max % 15 |
| 122 | Disconnecting all electric connections from the chlorine dosizingmotor 1.5 HP & taking outand rewinding the same motor with copper winding and refixing the same postion and testing complete all as specified and directed . |
| 123 | Supply and fix in replacementof butterfly valve( ISI Marked)of PN 1.0 ofdia 80 mmcomplete all as specified and directed. |
| 124 | Supply and fix in replacementofbutterfly valve (ISI Marked)of PN 1.0 ofdia 100mm complete all as specified and directed. |
| 125 | Supply and fix in replacementof new butterfly valve (ISI Marked)of PN 1.0 ofdia 150mm complete all as specified and directed |
| 126 | Supply and fixing in replacement 40 mmof gun metal globe or gate valves, (ISI Marked) with iron whel head, screwed both endes for iron pipe complete all as specified and directed |
| 127 | Supply and fixing in replacement 50mmof gun metal globe or gate valves,(ISI Marked) with iron whel head, screwed both endes for iron pipe complete all as specified and directed. |
| 128 | Supply and fixing in replacement 80 mmof gun metal globe or gate valves,(ISI Marked) with iron whel head, screwed both endes for iron pipe complete all as specified and directed. |
| 129 | M&Lfor disconnecting all electric connections from the submersiblepump & motor03 HP and taking out column assly from bore well and transporting the same to civil workshop for repair including winding etc complete all as specified and directed. |
| 130 | Disconnect the electric connections form starter andtaking out burntsubmersible starter from the existing position and supply and fixing new water sensor,starter3 phase of 10HP , 440 Volt ,front side openable and locking arrangement all as per directed . |
| 131 | Water testing reportof BASIC TEST/ HEAVY METAL TEST /PATHOGENSTEST as per list .Collectionof empty sterlised bottles from the Govt/ authorisedlab Mumbai ,Maharashtraafter taking outwater samplefromuser end / pump house.Water sample filled bottledepositing to the same lab for anaylsis test and collect the samplereport anddeposited to E/M sub divn all as directed by Engr-in-ChargeLocation : Reviera/ INS Shikra/ NT Pool/ Sasson Complex/ Bhagirathi/ Aditi/ Vishakha/Vandana/Foma house pump house |
| 132 | M&Lfor attending leakage complaints in pump house/ high rise building by checking centrifugal pump /NRV / sluice valve/Non return valve/gate valve of pipe line leakage including replacement of unseriviceable component including preventive maintinance spares by replacingminor parts i.egaland packing nut and bolts complete all as specified and as directed.Note:-If the contractorwill notattend the complaintsbyhis trades man in any working day /holiday including sunday the necessaryreovery of Rs.500/- per dayshall beimposedcomplete all as specified and directed . |
| 133 | M&L for attending underground pipe line leakage complaints of pipe of bore 80 mm to 150 mm upto 2 mtr depth line in any type of soil/ hard standing/ under road including earth work/welding work and labour charges complete all as specified and directed by Engr in Charge. Note : any pipe/ pipe fittings/rubber packing/any type of joint required for stop the leakage up to 5 mtr length of pipe included in the same rate. |
| 134 | M&L for attending underground pipe line leakage complaints of pipe of bore 20 mm to 63 mm upto 2 mtr depth line in any type of soil/ hard standing/ under road including earth work/welding work and labour charges complete all as specified and directed by Engr in Charge. Note : any pipe/ pipe fittings/rubber packing/any type of joint required for stop the leakage up to 5 mtr length of pipe included in the same rate. |
| 135 | Taking out sluice valves of dia upto 250 mm and refacing, regrinding and repair the same and refixing in position complete all as specified and directed. |
| 136 | Takingdown of leakage /rustednot grether than of 3 mtrs100 boreGI suction pipe fromthe existing position pump houseand replacewith newGIpipe line of sizeby threading / welding work /bend /, flanged / ,nut, bolts /, labour charge all as directed |
| 137 | Supply and layingGI tubing 15 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 138 | Supply and layingGI tubing 20 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 139 | Supply and layingGI tubing 40 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 140 | Supply and layingGI tubing 50 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 141 | Supply and layingGI tubing 80 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 142 | Supply and layingGI tubing 100 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 143 | Supply and layingGI tubing 150 mm bore medium gradewithall fittingsuch as tee, socket, bend, union etc in wall/trenches including taking down old rusted pipe complete all as specified and directed . |
| 144 | M & Lfor in repair maintenance free chemical earthing of environment friendly earth electrod set comprising of 17.2 mm dia , 3 m long rod low carbon steel molecular copper bounded for a thickness of 250 micro Omhs highly conductive ANS/INSF STD -60 certifiedcarbon bound backfill compound which shall set like concrete accordingly to BS 7430 & IEEE 80 each bag shall contain 50 ibs complete ass as specified and directed. |
| 145 | M&L for Welding work any type Gas welding/ electric welding for any tpye and in any position including cutting jointing completed as directed |
| 146 | Supply and fix bronze impeller suitable for 60/75 HP pump all as per manufacturer\"s design as per staging and eye of the impeller complete all as per specified and directed. |
| 147 | Supply and fix bronze impeller suitable for 40 HP pump all as per manufacturer\"s design as per staging and eye of the impeller complete all as per specified and directed. |
| 148 | Supply and fix bronze impeller suitable for 20 HP pump all as per manufacturer\"s design as per staging and eye of the impeller complete all as per specified and directed. |
| 149 | Dismantling of Damaged/Burnt MCCB and Supply & fixing of MCCB,3 Pole, 630 Amps, 36kA, 415Volts,50Hz AC scomplete all as specified |
| 150 | Dismantling of Damaged/Burnt MCCB and Supply & fixing of MCCB,4Pole, 400 Amps, 25kA, 415Volts,50Hz AC scomplete all as specified and directed |
| 151 | Dismantling of Damaged/Burnt MCCB and Supply & fixing of MCCB,4Pole, 200 Amps, 25kA, 415Volts,50Hz AC scomplete all as specified and directed |
| 152 | Dismantling of Damaged/Burnt MCCB and Supply & fixing of MCCB,4Pole, 160 Amps, 25kA, 415Volts,50Hz AC scomplete all as specified and directed |
| 153 | Dismantling of Damaged/Burnt MCCB and Supply & fixing of MCCB,3 Pole, 200 Amps, 25kA, 415Volts,50Hz AC scomplete all as specified and directed |
| 154 | Dismantling of Damaged/Burnt MCCB and Supply & fixing of MCCB,3 Pole, 160 Amps, 25kA, 415Volts,50Hz AC scomplete all as specified and directed |
| 155 | M & L for areacleaning of water supply installationincluding clearing of veglitation, wild growth and trimming of grass etc around the water storage tanks, valve pits and installation compound and removing rubbish off the premises complete including spreading of suitable chemicals as approved for further growth of weeds and vegtation in the vicinity of installations complete all as specified and as directed. |
| 156 | S&F in repairs PTMT float valve 15 mm dia high pressure with polythene float and fly complete, screwedfor Aluminium rode or PVCfenle and fixed in all as specified and directed . |
| 157 | S&F in repairsPTMT float valve 20 mm dia high pressure with polythene float and fly complete, screwedfor Aluminium rode or PVCfenle and fixed in all as specified and directed . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
