|
| 1 | CHAIR EASY (FD-229) |
| 2 | M & L for replacement of damaged front legs of chair easy with well seasonedteakwood, all as per drawing including taking out old leg complete all as specified and as directed. |
| 3 | All as per item No.1.01 above but rear legs |
| 4 | All as per item No. 1.01 above but back strip. |
| 5 | All as per item No.1.01 above front/ back rail /side rail. |
| 6 | All as per item No.1.01 above but stiffner |
| 7 | CHAIR WRITING (FD-280) |
| 8 | M & L for replacement of damaged front legs of Chair writing made out of well seasoned 1st class teak wood, all as per drawing including taking out old leg complete all as specified and as directed. |
| 9 | All as per item No. 2.01 above but rear leg. |
| 10 | All as per item No. 2.01 above but side rail |
| 11 | All as per item No. 2.01 above but back strip. |
| 12 | All as per item No. 2.01 above but front or back rail. |
| 13 | All as per item No. 2.01 above but stiffner |
| 14 | CHAIR WOODEN BOTTOMWITHOUT ARMS (FD-285) |
| 15 | M&L for replacement of seat of chair wooden bottom, made out of 6mm thick commercial plywood, BWR grade, (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing including taking out old seat complete all as specified and as directed. |
| 16 | M & L for replacement of damaged front legs of chair wooden bottom with new leg of required size and shape, made out of well seasoned teak wood, allas per drawing including dismantling of old leg complete all as specified and as directed. |
| 17 | All as per item No. 3.02 above but rear legs. |
| 18 | All as per item No. 3.02 above but side rail. |
| 19 | All as per item No. 3.02 above but front/back rail. |
| 20 | All as per item No. 3.02 above but back strip. |
| 21 | All as per item No. 3.02 above but stiffener. |
| 22 | CHAIR DINING & CHAIR DINING JCO/ORS (FD-279 & FD/MAP-II/05) |
| 23 | M&L for removal of old existing unsvPVC seat of chair dinning JCO/ORS, S&F new PVC seat 4mm thick with holes screwed with rails complete all as specified and as directed by the Engr-in-Charge. |
| 24 | M & L for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing including taking out old leg complete all as specified and as directed. |
| 25 | All as per item No. 4.02 above but rear leg |
| 26 | All as per item No. 4.02 above but back strip |
| 27 | All as per item No. 4.02 above but stiffener |
| 28 | All as per item No. 4.02 above but side rail |
| 29 | All as per item No. 4.02 above but front rail/back rail |
| 30 | TABLE 900 x 600 mm without drawer & with drawer (FD-284/FD-223 & FD-283/FD-224) |
| 31 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round all as per drawing complete all as specified and as directed. |
| 32 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing complete all as specified and as directed. |
| 33 | All as per item No. 5.02 above but front rail |
| 34 | All as per item No. 5.02 above but side rail |
| 35 | All as per item No. 5.02 above but stiffener |
| 36 | Replacement of drawer of table including one number of CP knob of size 40 x 40 mm fixed to each drawer completeas per drawing including taking out old drawer, complete all as specified and directed. |
| 37 | TABLE CENTRE (FD-274/FD-393) |
| 38 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing complete all as specified and as directed. |
| 39 | Taking out broken legs of table and S&F new leg of required size made out of well seasoned 1st class teak wood, all as per drawing complete all as specified and as directed. |
| 40 | All as per item No. 6.02 above but front rail |
| 41 | All as per item No. 6.02 above but side rail |
| 42 | PEG TABLE (FD-384/FD-236) |
| 43 | M & L for replacement of top of peg table with 18 / 19 mm thick pre-laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all round, all as per drawing including taking out old top complete all as specified and as directed. |
| 44 | M & L for replacement of leg ofpeg table with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & including taking out ofold broken legs complete all as specified and as directed. |
| 45 | All as per item No. 7.02 above but side / front rail of peg table |
| 46 | All as per item No. 7.02 above but stiffener/bottom rail of peg table |
| 47 | TEAPOY (FD-382) |
| 48 | M & L for replacement of top of teapoy with 18 / 19 mm thick pre-laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all round, all as per drawing including taking out old top complete all as specified and as directed. |
| 49 | M & L for replacement of leg of teapoy with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & including taking out ofold broken legs complete all as specified and as directed. |
| 50 | All as per item No. 8.02 above but side / front rail of teapoy |
| 51 | All as per item No. 8.02 above but stiffener/bottom rail of teapoy |
| 52 | TABLE DINING 6 PERSONS (FD-273/FD/MAP-II/03) |
| 53 | Taking down old unseviceable top from table dining and S&F new top of table dining 6 persons made out of exterior grade prelaminated MDF board 18mm thick complete all as specified and as directed. Make : Green Panel Max of green ply Durotuff. |
| 54 | M & L for replacement of damaged long rail of table dining 6 persons with well seasoned 1st class teakwood, all as per drawing including taking out old long rail complete all as specified and as directed. |
| 55 | All as per item No. 9.02 above but short rail of table dining 6 persons |
| 56 | All as per item No. 9.02 above but new leg of table dining 6 persons |
| 57 | All as per item No. 9.02 above but support stiffner of table dining 6 persons |
| 58 | TABLE DINING 8 PERSONS (FD- 273/ FD/MAP-II/03) |
| 59 | Taking down old unsv top from table dining and S&F new top of table dining 8 persons made out of exterior grade prelaminated MDF board 18mm thick complete all as specified and as directed. Make : Green Panel Max of green ply Durotuff. |
| 60 | M&L for replacement of damaged long rail of table dining 8 persons with well seasoned 1st class teakwood, all as per drawing including taking out old long rail complete all as specified and as directed. |
| 61 | All as per item No. 10.02 above but short rail of table dining 8 persons |
| 62 | All as per item No. 10.02 above but leg of table dining 8 persons |
| 63 | All as per item No. 10.02 above but support stiffner of table dining 8 persons |
| 64 | TABLE DINING 4 PERSONS (JCOs/ORs) 1200 X 900 MM (FD-273 & FD/MAP-II/03) |
| 65 | Taking down old unseviceable top from table dining and S&F new top of table dining 4 persons made out of exterior grade prelaminated MDF board 18mm thick complete all as specified and as directed. Make : Green Panel Max of green ply Durotuff. |
| 66 | M&L for replacement of damaged long rail of table dining 4 persons with well seasoned 1st class teakwood, all as per drawing including taking out old long rail complete all as specified and as directed. |
| 67 | All as per item No. 11.02 above but short rail of table dining 4 persons |
| 68 | All as per item No. 11.02 above but leg of table dining 4 persons |
| 69 | All as per item No. 11.02 above but support stiffner of table dining 4 persons |
| 70 | TABLE WRITING (FD-275) |
| 71 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing complete all as specified and as directed. |
| 72 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing complete all as specified and as directed. |
| 73 | All as per item No. 12.02 above but stiffener of Table writing. |
| 74 | M & L for replacement of shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock complete all as per drawing complete all as specified and as directed. |
| 75 | Replacementof drawer of table writingincluding one no CP Knob as per sample fixed to each drawer complete as per drawing complete all as specified and as directed. |
| 76 | M & L for replacement of back side of table writing with 6 mm thick one side teak faced plywood of verious size fixed to wooden frame as per existing and as per drawing complete all as specified and as directed. |
| 77 | BOARD NOTICE 8\"X4\" (FD-99(M), 1042) |
| 78 | Taking out existing unsv back side old ply wood notice board and S&F new commercial ply wood 12mm thick ply wood with suitable screw shall be provided all as shown on drg complete all as specified and as directed. |
| 79 | Removing of old existing unsv cloth and S&F new cloth as approved, fixed with removable as specified in drg complete all as specified and as directed. |
| 80 | Removing of old existing unsv Glass form notice board and S&F new Glass of 8\"x4\"x8mm thick shall be fixed to the frame of teak wood and polishing as shown on drg complete all as specified and as directed. |
| 81 | Removing of old existing unsv knob from the notice board and supply and fixing new knob as per sample, shape and size as per drg complete all as specified and as directed. |
| 82 | HAT STAND WITH MIRROR (FD-233) |
| 83 | Removing old existing unsv plywood from front frame of hat stand and S&F new 04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and as directed. Make :- Greenply/Kitply (Vista)/National Ply |
| 84 | Removing old existing unsv plywood from back side of hat stand and S&F new 04mm thick commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and as directed. Make :- Greenply/Kitply (Vista)/National Ply |
| 85 | Removing of old existing unsv looking mirror from hat stand and S&F new looking mirror of size 300 x 440 x 5mm of modi-gurard duly fixed in position as shown on drawing complete all as specified and as directed. |
| 86 | Removing old existing unsv beading fromhat stand and S&F new 06x35mm thick teak wood beading all as perdrawing including french polishing to match the other parts complete all as specified and as directed. |
| 87 | Removing of old existing unsv pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) to hat stand all as per drg complete all as specified and as directed. |
| 88 | SOFA SET 04/05 SEATER WITH CUSHION(FD-281/373/ 258) |
| 89 | Supply pair of seat & back foam cushion density thick foam of size 530mm X 500mm X 100mm covered with tapestry cloth (not less than Rs.200/- per mtr cost of cloth) as approved by GE. Cushion cover shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting complete all as specified and directed. Make : Sleepwell / Kurlon or equivalent |
| 90 | M & L for replacement of damaged front legs ofSofa setwith well seasoned Teakwood, all as per drawing including taking out old leg complete all as specified and as directed. |
| 91 | All as per item No. 15.02 above but rear legs of Sofa set |
| 92 | All as per item No. 15.02 above but arm-rest ofSofa set |
| 93 | All as per item No. 15.02 above but front/back rail of seat and back of Single seater Sofa. |
| 94 | All as per item No. 15.02 above but front/back rail of seat and back of Large Three Seater Sofa. |
| 95 | All as per item No. 15.02 above butside rail of seat and back ofSofa set |
| 96 | All as per item No. 15.02 above but stiffenerseat and back of sofa set |
| 97 | SIDE BOARD (FD-241/372) |
| 98 | Repairs to Side Board by taking down the existing broken /unsv topand S&F of new top of suitable size made of 18/19 mmthick prelaminated MDF board one side teak face & other side balancing white including all around teak wood beading of 6mm thick fixed with adhesive and panel pins complete all as specified and as directed as shown on drawing . |
| 99 | All as per serial item No.16.01 above but for door shutter including replacement of hinges as per the existing specification and ditto complete all as specified and as directed. |
| 100 | All as per serial item No.16.01 above but for replacement ofdrawer of side board as per the existing size and specification including one no CP knob as shown on drawing and ditto complete all as specified and as directed. |
| 101 | Repairs to Side Board by taking down the existing unsv backand S&F of new back of suitable size made of 6mm thick commercial plywood grade BWR as shown on drawing complete all as specified and as directed. |
| 102 | Removing of old existing unsv legsfrom Side board and S&F new Ist class hard wood teak legof side board as shown on drawing complete all as specified and as directed. |
| 103 | TABLE DRESSING LADIES WITH MIRROR & INCLUDING STOOL (FD-251, 378, FD/MAP-II/07) |
| 104 | Repair of old existing unsv mirror from table dressing ladies of 5.5mm thick of selected quanlity glass fixed with well seasoned 1st class teak wood framing of suitable size with 6mm thick commercial plywood BWR grade for back as shown on drawing complete all as specified and as directed. (Make of mirror: Atul, Goldfish, Modiguard) |
| 105 | Repairs of old existing unsv Top from table dressing ladies and S&F new Top of suitable size made of 18/19 mmthick commercial type particle board, exterior grade with 1mm thick plastice laminated sheet, teak vaneered pested over with approved adhessive as shown on drawing complete all as specified and as directed. |
| 106 | Removing old existing unsv knob from table dressing ladies and S&F new 25mm size CP brass knob as per shape and size shown in drawing and as directed complete all as specified and as directed. |
| 107 | Removing old existing unsv sliding glass from table dressing ladies and S&F new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and as directed. |
| 108 | Removing old existing unsv legs from table dressing ladies and S&F new legs ofIst class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified andas directed. |
| 109 | Removing old existing unsv sunmica from the top, sides, and front of table dressing ladies and S&F new 1.6 mm thick teakfaced sunmica of best quality fixed withadhesiveas per shape and size shown in drawing complete all as specified and as directed. |
| 110 | Removing old existing unsv sunmica from the drawer of table dressing ladies and S&F new 1.6 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and as directed. |
| 111 | Removing of old existing unsv leatherite seat of stool dressing cushion and S&F of New seat of foam cushion 75mm thick32 density covered with superior quality leatherite/tapestrycloth as approved, fixed with removable 12mm BWR grade commercial ply wood as specified in drg complete all as specified and as directed. |
| 112 | Removing old existing wheel of stool dressing with cushion and S&F new 50 dia heavy duty revolving nylon wheels complete all as specified and as directed. |
| 113 | CHAIR DINING (Offrs) (FD/E6/MAP/10(R)) |
| 114 | Removing of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class teak all as specified in drawing complete all as specified and as directed. |
| 115 | All as per item No. 18.01 above but front leg |
| 116 | All as per item No. 18.01 above but side rail |
| 117 | All as per item No. 18.01 above but front/ back rail |
| 118 | All as per item No. 18.01 above but stiffner |
| 119 | All as per item No. 18.01 above but back strip |
| 120 | Removing of old existing unsv leatherite seat and S&F of new seat of foam cushion 75mm thick32 density covered with superior quality leatherite/tapestrycloth as approved, fixed with removable 12mm BWR grade commercial ply wood as specified in drg complete all as specified and as directed. Tapestry/leatherite shall be provided as per sample direction of Engr-In-Charge/GE. |
| 121 | TABLE DRESSING GENTS WITH MIRROR & MIRROR DRESSING GENTS (FD-230, FD-379, FD/E6/MAP/16) |
| 122 | Removing of old existing unsv mirror from table dressing gents and S&F new mirror of 5mm thickshall befixedto theframe of teak wood and polishing as shown on drawing complete all as specified and as directed.(Make:- Modi-guard/Saint-Gobain/Swastik). |
| 123 | Removing old existing unsv sunmica from the top (all around as existing) of table dressing gents and S&F new 1.5 mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and as directed. |
| 124 | Removing old existing unsv drawer of table dressing gents and S&F new drawer with 1.6 mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and as directed. |
| 125 | Removing old existing unsv knob from table dressing gents and S&F new brass knob as per sample, shape and size shown in drawing complete all as specified and as directed. |
| 126 | Removing old existing unsv back from table dressing gents and S&F new back of suitable size made of 12 mmthick commercial type particle board, exterior gradeas shown on drawing complete all as specified and as directed. |
| 127 | BED WITH PLY TOP W/O FMN SET (FD-246) |
| 128 | Taking down existing old unsv head board and S&F new head board made out of 19mm thick soft wood batten & covered with 4mm thick teak face ply fixed on both side and 4mm thickteak wood edging around to be fixed with suitable fixing material all as shown on drawing complete all as specified and as directed. |
| 129 | Removing old existing unsv leg from bed plytop and S&F new leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and as directed. |
| 130 | All as per item No. 20.02 above but long rail complete ditto |
| 131 | All as per item No. 20.02 above but Short rail complete ditto |
| 132 | Taking outexisting unsv old ply wood from bed plytop and S&F new commercial ply wood12mm thick ply wood BWR grade commerical with suitable screw shall be providedall as shown on drg complete all as specified and as directed. |
| 133 | Taking outbroken damaged stiffener of Bed Plytop and S&F new stiffner of well seasoned 1st class teak wood, free from knot sap wood etc complete of2 Nos to support ply wood as shown on drawing complete all as specified and as directed. |
| 134 | CHAIR EASY with Cushion (FD-358) |
| 135 | M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made outof 1st class teakwood with nails of appropriate size all as shown ondrg complete all as specified and as directed. |
| 136 | All as 21.01 above butfront leg |
| 137 | All as 21.01 above front/ back rail /side rail. |
| 138 | All as 21.01 above but stiffner |
| 139 | All as 21.01 above but back strip |
| 140 | Taking out old unsv pair of rubber foam Seat & back and S&F of new pair of seat & back 75 mm thick foam cushion of 32 density with upholster cover with leatherised rexene attach with new seat made out of 12mm thick ply wood BWR grade commerical. Coverd with approved quality leatherised rexene as shown on drg complete all as specified and as directed.Make Sleepwell/Kuber/Kurlon or other equivalent and approved quality |
| 141 | TABLE BED SIDE (FD-276) |
| 142 | Removing old existing Top from table bed side and S&F new top of suitable size made of 18/19 mmthick prelaminated particle board one side teak face other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins as shown on drawing complete all as specified and as directed. |
| 143 | All as per serial item No. 22.01 above but for sides complete and ditto |
| 144 | All as per serial item No. 22.01 above but for shelf complete and ditto |
| 145 | Removing old existing back ply from table bed side and S&F new back of 6 mm ply BWR grade IS:303as per drg. |
| 146 | BOOK CASE WOODEN (FD-45(M)/237) |
| 147 | M & L for replacement of back of book case with 6 mm thick commercial ply wood BWR grade conforming to IS-303-1989 of ISI marked all other as per existing and as per drawing including taking out old back complete all as specified and as directed. |
| 148 | M & L for replacement of top and bottom of book case with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI markedall other as per existing and as per drawing including taking out old top and bottom complete all as specified and as directed. |
| 149 | M & L for replacement of shutter of book case with 18/19mm thick MDF board commercial type, exterior grade conforming to IS-3087-1989 and ISI markedall other as per existing and as per drawing including taking out old top and bottom complete all as specified and as directed. |
| 150 | Taking out old damaged/decayed leg from its position and S&F new leg of well seasoned 1st class \"Teak Wood’ including applying one coat of French polish over wood surfaces as shown on drawing complete all as specified and as directed. |
| 151 | Removing of old existing unsv knob from the side board and supply and fixing new knob as per sample ,shape and size all as per drawing complete all as specified and as directed. |
| 152 | BIN LINEN MULTIPURPOSE (FD/E6/MAP/09, FD-385) |
| 153 | Repairs to Bin Linen multipurpose by taking down the existing broken /unserviceable topand supply and fixing of new top of suitable size made of 18/19 mmthick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6mm thick fixed with adhesive and panel pins as shown on drawing complete all as specified and as directed. |
| 154 | All as per serial item No.24.01 above but for door shutter including replacement of hinges as per the existing specification and ditto complete all as specified and as directed. |
| 155 | All as per serial item No.24.01 above but for replacement ofdrawer of Bin Linen multipurpose as per the existing size and specification including one no CP knob as shown on drawing and ditto complete all as specified and as directed. |
| 156 | Repairs to Bin Linen multipurpose by taking down the existing broken /unsv backand S&F of new back of suitable size made of 6mm thick commercial plywood grade BWR as shown on drawing complete all as specified and as directed. |
| 157 | Removing of old existing unsv legsfrom Bin Linen multipurpose and supply and fixing new Ist class hard wood teak legof side board as shown on drawing complete all as specified and as directed. |
| 158 | CANNING OF MISCELLANEOUS WOODEN FURNITURE (FD-15, 16, 17, 20(M), 120(M), 229, 261, 262, 279, 280) |
| 159 | Taking out existing worn out cane plastic from seat & back of misc types of chairs and re-canning the same inexisting design in godrej pattern with new white half round plastic cane 2mm wide for weaving and for bordering 3mm wide as shown on drg complete all as specified and as directed. |
| 160 | POLISHING OF MISCELLANEOUS WOODEN FURNITURE |
| 161 | M&L forPolishing to all exposed/internal wooden surfaces of Table writing with French Polish with high glossy finish with the entire satisafaction of Engineer-in-Charge subject to minimum two coats after scrapping old dirt, stains etc & smoothing the surface with sand paper complete all as specified and as directed. (FD-275) |
| 162 | All as per items Sl No 26.01 here in above but ofChair writing. (FD-280) |
| 163 | All as per items Sl No 26.01 here in above but of Chair wooden bottom. (FD-285) |
| 164 | All as per items Sl No 26.01 here in above but of Chair dining. (FD-279/228) |
| 165 | All as per items Sl No 26.01 here in above but of Table 3\"x2\" with/without drawer. (FD-284/283) |
| 166 | All as per items Sl No 26.01 here in above but of Chair Easy. (FD-229) |
| 167 | All as per items Sl No 26.01 here in above but of Chair Easycushion. (FD-358) |
| 168 | All as per items Sl No 26.01 here in above but of Table 3\"x3\". (FD-88(M)/291) |
| 169 | All as per items Sl No 26.01 here in above but of Table peg. (FD-236/384) |
| 170 | All as per items Sl No 26.01 here in above but of Teapoy (FD-382) |
| 171 | All as per items Sl No 26.01 here in above but oftable centre/ 2tier. (FD-274/393) |
| 172 | All as per items Sl No 26.01 here in above but of table dining 8 persons. (FD-273/ FD/MAP-II/03) |
| 173 | All as per items Sl No 26.01 here in above but of table dining 6 persons. (FD-273/ FD/MAP-II/03) |
| 174 | All as per items Sl No 26.01 here in above but of table dining 4 persons. (FD-273/ FD/MAP-II/03) |
| 175 | All as per items Sl No 26.01 here in above but of table dressing gents. (FD-230/379) |
| 176 | All as per items Sl No 26.01 here in above but of Dressing Mirror gents. (FD/MAP-II/16(R)) |
| 177 | All as per items Sl No 26.01 here in above but of table bed side (FD-276) |
| 178 | All as per items Sl No 26.01 here in above but of side board. (FD-241/372) |
| 179 | All as per items Sl No 26.01 here in above but ofBed With ply top. (FD-/213/246) |
| 180 | All as per items Sl No 26.01 here in above but of table dressing ladies. (FD-251) |
| 181 | All as per items Sl No 26.01 here in above but of Bin soiled linen. (FD-15(M)) |
| 182 | All as per items Sl No 26.01 here in above but of Book case wooden. (FD-45M,237) |
| 183 | All as per items Sl No 26.01 here in above but of Chair dining officer. (FD/MAP-II/04, FD/E6/MAP/10) |
| 184 | All as per items Sl No 26.01 here in above but of Form with/without back. (FD-78(M), 77(M)) |
| 185 | All as per items Sl No 26.01 here in above but of Locker bedside. (FD-54(M)) |
| 186 | All as per items Sl No 26.01 here in above but of Sofa set 4 seater. (FD-281/373/ 258) |
| 187 | All as per items Sl No 26.01 here in above but of Sofa set 5 seater. (FD-281/373/ 258) |
| 188 | All as per items Sl No 26.01 here in above but of Table Office Offr Wooden. (DB-4119) |
| 189 | All as per items Sl No 26.01 here in above but of Table Office Clk Wooden. (DB-4120) |
| 190 | All as per items Sl No 26.01 here in above but of Almirah Mess Utensil. (FD-93(M)) |
| 191 | All as per items Sl No 26.01 here in above but of Hat Stand with Mirror. (FD-233, 361 & 362) |
| 192 | All as per items Sl No 26.01 here in above but of Book Case Open large glazed. (FD-356) |
| 193 | All as per items Sl No 26.01 here in above but of Table Eqpt. (DB-4120) |
| 194 | All as per items Sl No 26.01 here in above but of Table one pcs all purpose. (DB-1092) |
| 195 | All as per items Sl No 26.01 here in above but of Bin Linen Multipurpose. (FD-385, FD/E6/MAP/09) |
| 196 | All as per items Sl No 26.01 here in above but of Board Notice. (FD-366,99(M),1042) |
| 197 | All as per items Sl No 26.01 here in above but of Stool Dressing with Cushion. (FD/E6/MAP/14) |
| 198 | All as per items Sl No 26.01 here in above but of Table 2x2. (FD-95(M)/ 293) |
