|
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 2 | M&L forpoint wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulatedstranded copper conductor cable for continous earthing in & incl casing capping point wiring with accessories having ISI mark for one light/fan/bell point controlled by one switch complete all as specified and directed. |
| 3 | All as per item No 2 here-in-before but for one multipin socket outlet 5 Amp on the same board with other switches |
| 4 | All as per item No 2 here-in-before but for one multipin socket outlet 5 Amp but using 2x 1.5 + 1 x 1.5sqmm multistranded FRLS copper cable onthe independent board |
| 5 | All as per item No 2 here-in-before but for one multipin socket outlet 15 Amp,but using 2 x2.5 +1 x 2.5sqmm multistranded FRLS copper cable, independent board |
| 6 | All as per item No 2 here-in-before but for one earth plug socket,but using 2 x4.0 +1 x 4.0 sqmm multistranded FRLS copper cable, independent board |
| 7 | Supply, laying and drawing in and including 20 mm dia casing caping including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. |
| 8 | S&F in replacement of switch piano type 5 Amp, 230 Volt, flush type single pole one waycomplete all as specified and directed. |
| 9 | S&F in replacement of socket outlet multipin 5 Amp 230 Volt flush typecomplete all as specified and directed. |
| 10 | S&F in replacement of switch piano type 15 Amp, 230 Volt, flush type single pole one waycomplete all as specified and directed. |
| 11 | S&F in replacement of socket outlet multi pin 15 Amp 230 Volt flush type complete all as specified and directed. |
| 12 | S&F in replacement single pole and neutral enclosure with a two pin plug and socket complete with one single pole MCB 32 Amp complete all as specified and directed. |
| 13 | S&F in replacement offorLamp holder, PVC/Polycarbonate type with back plate suitable for Angle/batten fittings complete all as specified and directed |
| 14 | S&Fin replacement of Warm LED bulb9 Watt with base E27 complete all as specified and directed. |
| 15 | S&Fin replacement of Warm LED bulb9 Watt wth base B22 complete all as specified and directed. |
| 16 | S&F in replacement of rechargeable LED bulb minimum 4 Hrs Battery backup 9 Watt complete all as specified and directed. |
| 17 | S&F in replacement of Ceiling rose, 3 terminal, PVC isolated body complete all as specified and directed |
| 18 | S&F in replacement of stepped type electronic fan regulator flush type, complete all as specifiedand directed |
| 19 | S&F in replacement of LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 20 | S&F in replacement of LED light fitting 10W, 220 volt AC, having colour temperature daylight , Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 21 | S&F including flushing in wall MCB distribution board vertical TPN 4 way 415 volt AC doublr door sheet with bus bar neutral earth bar including provision of MCB TPN 63 amp conforming to IP 43 as incomercomplete all as specified and directed. |
| 22 | S&F in replacement MCB TPN 63 amp 415 volt with bearing capacity of 16 KA complete all as sp[ecified and directed. |
| 23 | S&F in replacement ofsheet metal enclosure double door distribution board single pole and neutral, 12 way 240 volt with 100 amps rated bus bar complete with bus and neutral linkcomplete all as specified and directed. |
| 24 | S&F in replacement ofsheet metal enclosure double door distribution board single pole and neutral, 8 way 240 volt with 100 amps rated bus bar complete with bus and neutral linkcomplete all as specified and directed. |
| 25 | S&F in replacement ofsheet metal enclosure double door distribution board single pole and neutral, 4 way 240 volt with 100 amps rated bus bar complete with bus and neutral linkcomplete all as specified and directed. |
| 26 | S&F in replacement of MCB 6 to 32 amp rating 240V, 10KA \"B\" curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 27 | S&F in replacement of MCB SPN 40 amp2 amp rating 240V, 10KA \"B\" curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 28 | S&F in replacement of Building LED street light fitting 35/36Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete. all as specified and directed. |
| 29 | Supplylaying jointing in replacement aluminium service cable 10 sqmm 2 core fixing on wall/ducts etc including necessary fixing arrangement such as cable lugs glands etc completeafter removing/taking out extg unsvcable to the entire satisfaction of Engr in Charge. |
| 30 | Supplylaying jointingin replacement aluminium service cable 6 sqmm 2 core fixing on wall/ducts etc including necessary fixing arrangement such as cable lugs glands etc completeafter removing/taking out extg unsvcable to the entire satisfaction of Engr in Charge. |
| 31 | Supply & Fixing in replacement SS combined 15 ampwith Box complete all as specified and directed by Engr-in-charge |
| 32 | Supply & Fixing in replacement SS combined 5 ampwith Box complete all as specified and directed by Engr-in-charge |
| 33 | Supply & Fixing in replacementSinglecore multistranded FRLS copper conductor 1.5 sqmmsize complete all as specified and directed. |
| 34 | Supply & Fixing in replacementSinglecore multistranded FRLS copper conductor 2.5 sqmmsize complete all as specified and directed. |
| 35 | Supply only Singlecore copper conductor multistranded FRLS 4.0 sqmmsize complete all as specified and directed. |
| 36 | S& F in replacement of LED round/square shape ceiling mounted recess light 6 watt complete all as specified & directed |
| 37 | S&F in replacement of LED warm white light fitting 20W, 220 volt AC, having colour temperature daylight (3000K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 38 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free 6500 K complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 39 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glarewarmlight 3000 K complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 40 | S&F in replacement of ceiling fan capacitor 3.15 mfdall specfied and directed. |
| 41 | Taking down ceiling/exhaust fan, ceiling cable complete all as specified and directed. |
| 42 | M&L for rewinding of ceiling fans of any type and make complete with super enamelled copper wire (HTP) in the workshop wire with appropriate gauge suiatble for existing make including necessary lathingmon shaft, capacitor,Bearing,both sides of rewinding covered with high quality varnish, replacement of ball bearing of SKF/NBC make and provisions of new nuts and pins for 1200/1400 mm sweep including taking out old burnt wind of copper/aluminium complete all as specified and directed. |
| 43 | S&F in replacementcanopy for ceiling fans (Set of two) complete all as specified and as directed. |
| 44 | M&L for rewinding exhaust fan of 450 mmsweep of any type & make complete with super enamelled copper wire (HTP) in the workshop including taking out old burnt wind copper/aluminium wire with appropriate gauge for suitable existing make, both sides of rewinding locked with high quantity varnish complete including replacement ofball bearing of SKF/NBC make and provisions of new nuts pin complete all as specified & directed. |
| 45 | M&L for rewinding exhaust fan of 300 mmsweep of any type & make complete with super enamelled copper wire (HTP) in the workshop including taking out old burnt wind copper/aluminium wire with appropriate gauge for suitable existing make, both sides of rewinding locked with high quantity varnish complete including replacement ofball bearing of SKF/NBC make and provisions of new nuts pin complete all as specified & directed. |
| 46 | S&F in replacement of copper winding motor of wall mounted fan for sweep 300mm as per site requirement complete all as specified & directed. |
| 47 | M&L for openingof BLDC ceiling fan 1200 mm sweep including replacement of PCB card and repair the BLDC ceiling fan and deposit to the MES yard with complete running position all as specified and directed. |
| 48 | S&F in replacement of heating unit(element)240 volt AC ISI marked of 2000 watts for Bajaj make geyser any shape rating as required at site including rubber washers complete, all as specified and as directed. |
| 49 | S&F in replacement of capillary type thermostat switch suitable for 25 ltr bajaj make geyser AC 230 volt adjustable range from 0-90 degree Celsius, complete all as specified and directed. |
| 50 | S&F in replacement of heating unit(element)240 volt AC ISI marked of 2000 watts any shape rating as required at site including rubber washers complete, all as specified and as directed. |
| 51 | S&F in replacement of thermostat switch suitable for 25 ltr geyser AC 230 volt adjustable range from 0-90 degree Celsius, complete all as specified and directed. |
| 52 | S&F in replacement of indicator lamp any type suitable for geyser 25 ltr all as per sample AC 230 Volt, complete all as specified anddirected by Enginner-in-Charge. |
| 53 | S&F in replacement of PVC connection 15mm dia 90 cm Longcomplete with brass flair nuts at both ends. ( ISI marked and suitable for hot water supply upto 100 degree celcius), complete all as specified anddirected by Enginner-in-Charge. |
| 54 | S&F in replacement of anchor bolt 12mmX100mm long complete all as specified and directed (Note:- Anchor bolt shall be grouted with hammer drill only) |
| 55 | S&F in replacement of plug top 15 Amp three pin for geysers, complete all as specified. |
| 56 | S&F in replacement of plug top 5 Amp three pincomplete all as specified. |
| 57 | S&Fcopper winding motor of Fresh air fan for sweep 250mm/300mm as per site requirement complete all as specified & directed. |
| 58 | Supply & Fixing in replacement3 mm thick hylum sheet 9x11 including cutting of suitable for switch/socket/regulator complete all as specified and directed. |
| 59 | Supply & Fixing in replacement 3 mm thick hylum sheet 8x5including cutting of suitable for switch/socket complete all as specified and directed. |
| 60 | Supply & Fixing in replacement3 mm thick hylum sheet 5x5 completeincluding cutting of suitable for switch/socketall as specified and directed. |
| 61 | Supply & Fixing in replacementmetal thick sunken box 4x4 including brass scews and cupcomplete all as specified and directed. |
| 62 | Supply only metal thick sunken box 8x10 including brass scews and cup complete all as specified and directed. |
| 63 | Supply only metal thick sunken box 7x4 including brass scews and cup complete all as specified and directed. |
| 64 | S & F in replacement of Modular switch 1 way 6 Amp, 1 module complete as per site reuirement all as specified and directed. |
| 65 | S & F in replacement of Modular socket 6 Amp, 2&3 pin combined, 2 module complete as per site reuirementall as specified and directed. |
| 66 | S & F in replacement of Modular switch 1 way 16 Amp, 1 module complete as per site reuirementall as specified and directed. |
| 67 | S & F in replacement of Modular socket 16Amp, 2&3 pin combined, 2 module complete as per site reuirementall as specified and directed. |
| 68 | S & F in replacement of Modular fan regulator, 120W-2 module, complete as per site reuirementall as specified and directed. |
| 69 | S & F in replacement of Modular cover plate with frame 3 module, complete as per site reuirementall as specified and directed. |
| 70 | S & F in replacement of Modular cover plate with frame 6 module, complete as per site reuirementall as specified and directed. |
| 71 | S& F in replacement of 3 way modular PVC box complete as per site reuirementall as specified and directed. |
| 72 | S& F in replacement of 6 way modular PVC box complete as per site reuirementall as specified and directed. |
| 73 | S&F in replacementled 10 watt square wi-fi smart ceiling light for home music sync function of cut off size 6 inch complete all as specified and directed. Make:-Phillips/Havells/Bajaj |
| 74 | Supply and fix High quality LED smart batten tubelight 20 W, aesthetically designed LED having extruded aluminum housing with Microwave motion technology for providing an energy efficient solution and with aluminum housing & integrated electronic driver.,internaly pre wired of 1.5 sqmm twin twisted flexible cable of make Havells with cat part no.LUMILINESMART20WLED865PCWH or equivalent, Including marking of CA No on batten all as specified & directed. |
| 75 | S & Fsurface suspended LED luminaire, 36 W, 230 volt, suitable for suspended mounting with extruded aluminium in powder coated housing panel for surface mounting which produces continuous lines of light distribution complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- DESTG250LP/S36WLED840SWH1130 or its equivalent cat part in make Bajaj,Philips. |
| 76 | S & F in repair surface suspended LED circular luminaire, 25 W, 230 volt, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- TORUS600RDP/S25WLED857SPMMAWH or its equivalent cat part in make Bajaj,Philips. |
| 77 | S&F recessed mounted pop -up-led down light with 355 degree rotation and 90 degree tilt for directional adjutment high efficiency, COB used with better product efficiency 95 LPW THD less than 10%.Make Haveels Cat Part No:-UNECOPOPR10WLED830S24WHT OR EQUIVALENT |
| 78 | S&F in replacement of LED bay light fitting 75 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed. |
| 79 | Schedule of Credit |
