Tender For Repairing Of Sofa Set And All Types Of Cushions Chairs, Bed, Charpai At Af Stn Bhuj, Bhuj-Gujarat

TDR : 53046048

Tender Notice
BOQ

18 Days Left

Bhuj , Gujarat

Tender Brief : Tender For Repairing Of Sofa Set And All Types Of Cushions Chairs, Bed, Charpai At Af Stn Bhuj

Document Fees
₹ 500 /-

EMD
₹ 49980.0 /-

Tender Value
Refer document

Submission Date
08-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 6.00 including preparation,S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawingsand as directed by Engineer-in-Charge:
2	REPAIR TO SOFA SET 3 PCS/ 5 SEATER (FD- 258/281/373)
3	Arms made of 1st class hard wood (Teak wood)
4	Wooden batten of seat frame made of 1st class hard wood (Teak wood)
5	Wooden batten of back frame made of 1st class hard wood (Teak wood)
6	Front rail of seat of3 Seater Sofa made of 1st class hard wood (Teak wood)
7	Side rail of seat ofsingle/three Seater Sofa made of 1st class hard wood (Teak wood)
8	Front rail of seat ofsingle Seater Sofa made of 1st class hard wood (Teak wood))
9	Legs made of 1st class hard wood (Teak wood)
10	Back rail of Seat/Back of3 Seater Sofa made of 1st class hard wood (Teak wood))
11	Back rail of seat/Back ofsingle Seater Sofa made of 1st class hard wood (Teak wood))
12	Wooden Bearer of Seat/Back of3 Seater Sofa made of 1st class hard wood (Teak wood)
13	S&F in replacement foam cushion (ISI Marked IS-1741) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22\"x21\"x4\" thick foam of 40 density for seat& back covered withsuperior quality tapestry cloth with Zip opening systemas approved by Engr-in-charge/User. NOTE: The foam cushion in original packing with warranty cardand tapestry cover (with zip opening system) shall be brought separately at furniture yard and after inspection the same shall be fixed.
14	CHAIR EASY CUSHIONED (FD-358)
15	Rear Legs Made of 1st Class hard wood (Teak Wood)
16	Front legs Made of 1st Class hard wood (Teak Wood)
17	Arms Made of 1st Class hard wood (Teak Wood)
18	Front/Back rails for seat Made of 1st Class hard wood (Teak Wood)
19	Side rails for seat Made of 1st Class hard wood (Teak Wood)
20	Top/Bottom rails for back Made of 1st Class hard wood (Teak Wood)
21	Side rails for back Made of 1st Class hard wood (Teak Wood)
22	S&F in replacement of unserviceable seatof chair easy as per existing patternwith 75mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 9mm commercial plywood as specified duly covered with well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
23	S&F in replacement of unserviceable backof chair easy as per existing patternwith 50mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 9mm commercial plywood as specified duly covered with well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
24	S&F Wooden Corner Brackets of size 75x75x25mm
25	CHAIR DINING OFFRS(FD/MAP-II/04)(FD/E6/MAP/10)
26	Rear Legs Made of 1st Class hard wood (Teak Wood)
27	Front legs Made of 1st Class hard wood (Teak Wood)
28	Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood)
29	Front/Side rails Made of 1st Class hard wood (Teak Wood)
30	Stiffners Made of 1st Class hard wood (Teak Wood)
31	Top/Bottom rails for back Made of 1st Class hard wood (Teak Wood)
32	S&F in replacement of unserviceable seatof chair Dining as per existing patternwith 75mm thick foam cushion of 40 density over 12mm commercial plywood BWR grade as specified duly covered with well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
33	S&F in replacement of old/unserviceable tapestry cloth of seatof chair Dining as per existing patternwith new well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
34	S&F Wooden Corner Brackets of size 75x75x35mm
35	DRESSING MIRROR GENTS (FD/E6/MAP/16)
36	S&F in replacement of unserviceable looking mirror 5.5 mm thick with newteak wood beading
37	S&F inreplacement of unserviceable Back ply12 mm thickas per Drg.
38	S&F new Teak Wood Brackets made out of 38x112x112mm with TW legs complete as shown on Drg
39	S&F inreplacement of unserviceable 5.5mm glass shelves with glass holder
40	S&Fnew Cabinet complete with Teak Wood Frame for Mirror,all as per Drg but made with 18/19mm thick Prelaminated MDF Board Ext Grade of approved shade
41	TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/251/378/FD/MAP-II/07):
42	S&F, in repair, unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame.
43	S&F Glass panes of shutters made of5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding
44	New 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete including Back Ply.
45	S&F, in repair, unserviceable Back of the Table Made of 12 mm thick Ply woodas shown in Drg.
46	S& F new drawers as per drawing(FD -251)
47	S&F new SS Handles as approved by Engr-in-Charge
48	S&F new SS Knobs as approved by Engr-in-Charge
49	S& F New MDF Sheet of thickness 3mm, on old outer Surface of Table Dressing Ladies/ Side Board etc as directed.
50	REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)-
51	Removing of old unserviceable ply top from existing charpoyand S&F the new 12mm thickBWRcommercial plywood with unpolished edging(ISI marked) suitable for charpoyhaving approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gass welding of existing frame before fixing the ply all as per drg amnd as directed.
52	Repairs of damaged parts,scraping of existing coat of paintsfiling, finishing and painting of Charpoy IP with two coats of synthetic enamel paint of approved shade after giving a primer coat with red oxide and as directed by Engr-in-Charge.
53	S&F hard PVC shoes of best quality as approved by Engr-in-Charge.
54	REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)
55	S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer, including removal of old unserviceable ply top complete all as per specified and directed by Engr-in-charge.
56	M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed.
57	M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 8.02 to the required size for short rail including threading at both ends completeall as specified and directed .
58	Removing of Old unserviceable legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 8.03 here-in-beforeby cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.
59	Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit.
60	Supply and fixing (by welding) flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with long rail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applyingtwo coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge.Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit.
61	M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitablefor GI Pipe med grade 32 mm bore pipecompleteall as specified and directed .
62	S&F in replacement of unserviceable check nut6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make completeall as specified and directed
63	S&F 3mm thick base MS circular plates of 55mm dia duly painted to the legsas directed by Engr - in - Charge.
64	REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) :
65	S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & boltswith washers without having any joints after tightening of frame by welding. shape and size as per drg and as directed by Engr-in-Charge.
66	REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head restto be made of 18 mm thick Ext gradePrelaminated MDFboard of approved shade duly covered with PVC beading 2 mm thick all around of size with suitableScrews with the cleats as specified on drg and asdirected by Engineer-in-Charge.
67	REPAIR TO FOOT BOARD :All as per Srl item No. 9.02 but for foot board.
68	M&L, scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer and as directed by Engr-in-Charge.
69	S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.
70	CHARPOY FOLDING IP WITH HARD TOP
71	S&F in replacement of unserviceable top of Charpoy Folding to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked in two pieces and to be fixed with appropriate sizes of SS nuts & boltswith washers without having any joints after tightening of frame . shape and size as per drg and as directed by Engr-in-Charge.
72	Removing of old unserviceable Components of charpoy folding and S&F new with MS pipe of 25 mm bore with wall thickness 1.6mm by welding/Reveting and including minor repair/weldingcomplete directed by the Engineer-in-Charge.
73	S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified.
74	M&L, scraping of existing coat of paints complete filling, finishing and paintingwith two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer and as directed by Engr-in-Charge.
75	Chair Revoving Executive/ Computer with Arms(TP/(FD/E6/MAP/12)
76	Labourfor removing the U/S casterwheeland S & F new twin caster wheel to chair revolving/executive/Computer including welding wherever required to match with the original complete all as directed by Engr-in-Charge.
77	Labour for removing oldheight adjustment mechanism of chair revolving/executive/computer and S&F new height adjustment mechanism including greasing complete all as specified and directed by Engineer-in-Charge.
78	Labour for removing old broken/ damaged rod ofchair revolving/executive/computer and S&F new rod all as specified and directed by Engineer-in-Charge.
79	Labourfor removing the torned/deshaped foam leather/ cloth tapestry/Mesh for seat and back of chair revolving high back / executive and S & F newrexine/cloth tapestry/Mesh cover with foam cushion of required thickness (as directed) of approved quality to match the original complete all as specified and directed.
80	Labourfor removing the torned/deshaped foam leather/ cloth tapestry/Mesh and cushion for seat and back of chair revolving/computer chair Med & low back/Chair Visitor and S & F new foam cushion of required thickness (as directed) and rexine/cloth tapestry/Mesh cover of approved quality to match the original complete all as specified and directed.
81	Labour for removing unserviceablehydraulic gas lift and S/F new hydraulic gas lift to chair revolving /executive/computer /chair Med & low backincluding welding wherever required to match the original complete all as specified and as directed.
82	Labour for removing u/s ABS of chair revolving /executive/computer /chair Med & low back and S&F new ABS of approved quality as Specified and directed by Engr-In-Charge.
83	Labour for removing unserviceable wheel base and S/F new wheel base of steel (including twin castor wheels) with 5 arms tochair revolving /executive/computer /chair Med & low back including welding wherever required to match the original complete all as specified anbd as directed.
84	S&F new moulded cushion Seat & Back complete with12 mm thickHot pressed Plywood and duly upholstered(Both together as one Set) for chair revolving Executive/High Back to match the original complete all as specified and directed
85	Labour for removing old/broken handles and S & F new handles complete in pairs for chair revolving /executive/computer /chair Med & low back to match the original complete all as specified andas directed.
86	REPAIR TO CHAIR WRITING/CHAIR VISITORS (FD/E6/MAP/12)/TP
87	Labour forremoving the existing worn out/ unserviceable seat of chair Writing and S & F new seat frame of size 500x450mm made from 12 mm thickHot pressed Plywood with moulded polyurethane Foam 50mm thick with density 50-55 Kg per cubic Mtr, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge.
88	All as per Sl. No. 12.01 but for Back of Chair Writing of size 500x450mm
89	Labour forremoving the existing worn out/ unserviceable seat cover of chair and S & F new foam cushion of required thickness (as directed) and seat cover of size 500x450mm made fromfabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge.
90	All as per Sl. No. 12.03 but for Back of Chair Writing of size 500x450mm
91	S&F Rubber Stoppers of appropriate size with MS screws
92	S&F iron strip joining seat and back as per existing shape and size with suitable nuts and bolts as directed by Engr-in-Charge.
93	Removing of unserviceable arms in any position, S&F new armswith nuts and bolts as per drg as directed by Engr-in-Charge.
94	S&F new base plate duly black painted of existing shape and size of arms as directed by Engr-in-charge.
95	Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed by the Engr-in-Charge.
96	BED HARD WITH PLY TOP ( FD-213/246/247) :
97	S&F in replacement of unserviceable top of bed Hard Plytop/Newar to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with 25 mm long steel screw without having any joints, Make of ply :Kit Ply/Green ply/Century shape and size, as per drgand directed by Engr-in-charge.
98	S&F in replacement of unserviceable long rail shall be First class hardwood well seasonedteak wood free from cracks and dead knots, shape and size, all ason drg and as directed by Engr-in-Charge.
99	All as per Srl ItemNo. 13.02 above but Short Rail/Stiffener.
100	HEAD REST : Unserviceableply to be replaced by 3 mm thick ply wood both sides of Head Board one side teak facedand other side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI markedincluding teak wood beading all around and 1/2 cut 12 mmdia beading made to shape as shown on drg or directed byEngr-In-Cahrge.
101	FOOT REST : All as per Srl ItemNo. 13.04 above but foot rest.
102	HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4\"x4\"x6mm, suitable type of MS Screws. All as per drg and as directed by Engr-in-Charge
103	FOOT REST : All as per Srl ItemNo. 13.06 above but foot rest.
104	S&F Wooden Corner Brackets of size 100x100x35mm between legs and long rail.
105	M&L for Removing old unservicableupholstery including subsidiary itemslike FRC sheet,Markeen cloth, Hassian cloth, Spring, Cushion100mm thick and tapestry cloth ofSofa Setsand S&F thenew approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Hassian cloth, New Spring and Cord , Cushion100mm thick of 40D and tapestry cloth ofSofa Sets with Melamine polish on wooden surfaces exposed to view after completion of upholstery work. Note : Colour, shade,texture, design/pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. Complete all as directed by Engr-in-Charge for the followings :
106	REPAIR TO FULLY UPHOLSTRED SOFA SET (SINGLE SEATER) (TP)
107	REPAIR TO FULLY UPHOLSTRED SOFA SET (TWO SEATER) (TP)
108	REPAIR TO FULLY UPHOLSTRED SOFA SET (THREE SEATER) (TP)
109	S&F SS Legs of height 75mm as approved by Engr-in-Charge
110	CHAIR CBA STEEL WITH ARMS (FD-75)
111	Labour forremoving the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made fromcommercial plywood 12 mm thick and 50 mm thick 40 Dfoam cushion, duly coveredwith cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge.
112	All as per Sl. No. 15.01 but for Back of Chair CBA Steelof size 460x380mm
113	M&L for welding with 25 x 3.0 mm MS flat iron 510 mm long with holes to fixscrews to seat/back frame for fixingsheet/back frame including screws complete all as specified and as directed for Chair CBA Steel (FD 75 (M)
114	S&F new PVC Caps.
115	S&F new IInd class hard wood/PVC arms as per sample.
116	CHAIR CB STEEL WITHOUT ARMS (FD-75)
117	Labour forremoving the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made fromcommercial plywood 12 mm thick and 50 mm thick 40 Dfoam cushion, duly coveredwith cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge.
118	All as per Sl. No. 16.01 but for Back of Chair CBA Steelof size 460x380mm
119	S&FMS flat iron 25 x 3 mm duly welded to seat/Back frame of chair CB/CBA steel for fixingseat/back frame including screws complete all as specified and as directedby the Engineer-in-Charge.
120	S&F new PVC Caps.
121	Labourfor cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty including tightening of loose joints if any and applying two coats of french polishfor the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site)
122	Bed plywood top FD - 213/246
123	Sofa set 5 seater FD - 281/373/258
124	Sofa set seater single chair ( FD-281/373/258)
125	Chair Easy Cushioned
126	Chair Dining Offrs
127	Dressing Mirror Gents
128	Table dressing Ladies

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Gujarat Tenders

Furniture Tenders

Seating Facility Tenders

Sofa Set Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repairing Of Sofa Set And All Types Of Cushions Chairs, Bed, Charpai At Af Stn Bhuj, Bhuj-Gujarat

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 6.00 including preparation,S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawingsand as directed by Engineer-in-Charge:
2	REPAIR TO SOFA SET 3 PCS/ 5 SEATER (FD- 258/281/373)
3	Arms made of 1st class hard wood (Teak wood)
4	Wooden batten of seat frame made of 1st class hard wood (Teak wood)
5	Wooden batten of back frame made of 1st class hard wood (Teak wood)
6	Front rail of seat of3 Seater Sofa made of 1st class hard wood (Teak wood)
7	Side rail of seat ofsingle/three Seater Sofa made of 1st class hard wood (Teak wood)
8	Front rail of seat ofsingle Seater Sofa made of 1st class hard wood (Teak wood))
9	Legs made of 1st class hard wood (Teak wood)
10	Back rail of Seat/Back of3 Seater Sofa made of 1st class hard wood (Teak wood))
11	Back rail of seat/Back ofsingle Seater Sofa made of 1st class hard wood (Teak wood))
12	Wooden Bearer of Seat/Back of3 Seater Sofa made of 1st class hard wood (Teak wood)
13	S&F in replacement foam cushion (ISI Marked IS-1741) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22\"x21\"x4\" thick foam of 40 density for seat& back covered withsuperior quality tapestry cloth with Zip opening systemas approved by Engr-in-charge/User. NOTE: The foam cushion in original packing with warranty cardand tapestry cover (with zip opening system) shall be brought separately at furniture yard and after inspection the same shall be fixed.
14	CHAIR EASY CUSHIONED (FD-358)
15	Rear Legs Made of 1st Class hard wood (Teak Wood)
16	Front legs Made of 1st Class hard wood (Teak Wood)
17	Arms Made of 1st Class hard wood (Teak Wood)
18	Front/Back rails for seat Made of 1st Class hard wood (Teak Wood)
19	Side rails for seat Made of 1st Class hard wood (Teak Wood)
20	Top/Bottom rails for back Made of 1st Class hard wood (Teak Wood)
21	Side rails for back Made of 1st Class hard wood (Teak Wood)
22	S&F in replacement of unserviceable seatof chair easy as per existing patternwith 75mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 9mm commercial plywood as specified duly covered with well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
23	S&F in replacement of unserviceable backof chair easy as per existing patternwith 50mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 9mm commercial plywood as specified duly covered with well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
24	S&F Wooden Corner Brackets of size 75x75x25mm
25	CHAIR DINING OFFRS(FD/MAP-II/04)(FD/E6/MAP/10)
26	Rear Legs Made of 1st Class hard wood (Teak Wood)
27	Front legs Made of 1st Class hard wood (Teak Wood)
28	Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood)
29	Front/Side rails Made of 1st Class hard wood (Teak Wood)
30	Stiffners Made of 1st Class hard wood (Teak Wood)
31	Top/Bottom rails for back Made of 1st Class hard wood (Teak Wood)
32	S&F in replacement of unserviceable seatof chair Dining as per existing patternwith 75mm thick foam cushion of 40 density over 12mm commercial plywood BWR grade as specified duly covered with well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
33	S&F in replacement of old/unserviceable tapestry cloth of seatof chair Dining as per existing patternwith new well finishedtapestry cloth/Rexine of approved shade and quality as directedby Engr-in- charge/GE.
34	S&F Wooden Corner Brackets of size 75x75x35mm
35	DRESSING MIRROR GENTS (FD/E6/MAP/16)
36	S&F in replacement of unserviceable looking mirror 5.5 mm thick with newteak wood beading
37	S&F inreplacement of unserviceable Back ply12 mm thickas per Drg.
38	S&F new Teak Wood Brackets made out of 38x112x112mm with TW legs complete as shown on Drg
39	S&F inreplacement of unserviceable 5.5mm glass shelves with glass holder
40	S&Fnew Cabinet complete with Teak Wood Frame for Mirror,all as per Drg but made with 18/19mm thick Prelaminated MDF Board Ext Grade of approved shade
41	TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/251/378/FD/MAP-II/07):
42	S&F, in repair, unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame.
43	S&F Glass panes of shutters made of5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding
44	New 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete including Back Ply.
45	S&F, in repair, unserviceable Back of the Table Made of 12 mm thick Ply woodas shown in Drg.
46	S& F new drawers as per drawing(FD -251)
47	S&F new SS Handles as approved by Engr-in-Charge
48	S&F new SS Knobs as approved by Engr-in-Charge
49	S& F New MDF Sheet of thickness 3mm, on old outer Surface of Table Dressing Ladies/ Side Board etc as directed.
50	REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)-
51	Removing of old unserviceable ply top from existing charpoyand S&F the new 12mm thickBWRcommercial plywood with unpolished edging(ISI marked) suitable for charpoyhaving approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gass welding of existing frame before fixing the ply all as per drg amnd as directed.
52	Repairs of damaged parts,scraping of existing coat of paintsfiling, finishing and painting of Charpoy IP with two coats of synthetic enamel paint of approved shade after giving a primer coat with red oxide and as directed by Engr-in-Charge.
53	S&F hard PVC shoes of best quality as approved by Engr-in-Charge.
54	REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)
55	S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer, including removal of old unserviceable ply top complete all as per specified and directed by Engr-in-charge.
56	M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed.
57	M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 8.02 to the required size for short rail including threading at both ends completeall as specified and directed .
58	Removing of Old unserviceable legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 8.03 here-in-beforeby cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.
59	Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit.
60	Supply and fixing (by welding) flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with long rail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applyingtwo coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge.Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit.
61	M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitablefor GI Pipe med grade 32 mm bore pipecompleteall as specified and directed .
62	S&F in replacement of unserviceable check nut6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make completeall as specified and directed
63	S&F 3mm thick base MS circular plates of 55mm dia duly painted to the legsas directed by Engr - in - Charge.
64	REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) :
65	S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & boltswith washers without having any joints after tightening of frame by welding. shape and size as per drg and as directed by Engr-in-Charge.
66	REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head restto be made of 18 mm thick Ext gradePrelaminated MDFboard of approved shade duly covered with PVC beading 2 mm thick all around of size with suitableScrews with the cleats as specified on drg and asdirected by Engineer-in-Charge.
67	REPAIR TO FOOT BOARD :All as per Srl item No. 9.02 but for foot board.
68	M&L, scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer and as directed by Engr-in-Charge.
69	S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.
70	CHARPOY FOLDING IP WITH HARD TOP
71	S&F in replacement of unserviceable top of Charpoy Folding to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked in two pieces and to be fixed with appropriate sizes of SS nuts & boltswith washers without having any joints after tightening of frame . shape and size as per drg and as directed by Engr-in-Charge.
72	Removing of old unserviceable Components of charpoy folding and S&F new with MS pipe of 25 mm bore with wall thickness 1.6mm by welding/Reveting and including minor repair/weldingcomplete directed by the Engineer-in-Charge.
73	S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified.
74	M&L, scraping of existing coat of paints complete filling, finishing and paintingwith two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer and as directed by Engr-in-Charge.
75	Chair Revoving Executive/ Computer with Arms(TP/(FD/E6/MAP/12)
76	Labourfor removing the U/S casterwheeland S & F new twin caster wheel to chair revolving/executive/Computer including welding wherever required to match with the original complete all as directed by Engr-in-Charge.
77	Labour for removing oldheight adjustment mechanism of chair revolving/executive/computer and S&F new height adjustment mechanism including greasing complete all as specified and directed by Engineer-in-Charge.
78	Labour for removing old broken/ damaged rod ofchair revolving/executive/computer and S&F new rod all as specified and directed by Engineer-in-Charge.
79	Labourfor removing the torned/deshaped foam leather/ cloth tapestry/Mesh for seat and back of chair revolving high back / executive and S & F newrexine/cloth tapestry/Mesh cover with foam cushion of required thickness (as directed) of approved quality to match the original complete all as specified and directed.
80	Labourfor removing the torned/deshaped foam leather/ cloth tapestry/Mesh and cushion for seat and back of chair revolving/computer chair Med & low back/Chair Visitor and S & F new foam cushion of required thickness (as directed) and rexine/cloth tapestry/Mesh cover of approved quality to match the original complete all as specified and directed.
81	Labour for removing unserviceablehydraulic gas lift and S/F new hydraulic gas lift to chair revolving /executive/computer /chair Med & low backincluding welding wherever required to match the original complete all as specified and as directed.
82	Labour for removing u/s ABS of chair revolving /executive/computer /chair Med & low back and S&F new ABS of approved quality as Specified and directed by Engr-In-Charge.
83	Labour for removing unserviceable wheel base and S/F new wheel base of steel (including twin castor wheels) with 5 arms tochair revolving /executive/computer /chair Med & low back including welding wherever required to match the original complete all as specified anbd as directed.
84	S&F new moulded cushion Seat & Back complete with12 mm thickHot pressed Plywood and duly upholstered(Both together as one Set) for chair revolving Executive/High Back to match the original complete all as specified and directed
85	Labour for removing old/broken handles and S & F new handles complete in pairs for chair revolving /executive/computer /chair Med & low back to match the original complete all as specified andas directed.
86	REPAIR TO CHAIR WRITING/CHAIR VISITORS (FD/E6/MAP/12)/TP
87	Labour forremoving the existing worn out/ unserviceable seat of chair Writing and S & F new seat frame of size 500x450mm made from 12 mm thickHot pressed Plywood with moulded polyurethane Foam 50mm thick with density 50-55 Kg per cubic Mtr, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge.
88	All as per Sl. No. 12.01 but for Back of Chair Writing of size 500x450mm
89	Labour forremoving the existing worn out/ unserviceable seat cover of chair and S & F new foam cushion of required thickness (as directed) and seat cover of size 500x450mm made fromfabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge.
90	All as per Sl. No. 12.03 but for Back of Chair Writing of size 500x450mm
91	S&F Rubber Stoppers of appropriate size with MS screws
92	S&F iron strip joining seat and back as per existing shape and size with suitable nuts and bolts as directed by Engr-in-Charge.
93	Removing of unserviceable arms in any position, S&F new armswith nuts and bolts as per drg as directed by Engr-in-Charge.
94	S&F new base plate duly black painted of existing shape and size of arms as directed by Engr-in-charge.
95	Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed by the Engr-in-Charge.
96	BED HARD WITH PLY TOP ( FD-213/246/247) :
97	S&F in replacement of unserviceable top of bed Hard Plytop/Newar to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with 25 mm long steel screw without having any joints, Make of ply :Kit Ply/Green ply/Century shape and size, as per drgand directed by Engr-in-charge.
98	S&F in replacement of unserviceable long rail shall be First class hardwood well seasonedteak wood free from cracks and dead knots, shape and size, all ason drg and as directed by Engr-in-Charge.
99	All as per Srl ItemNo. 13.02 above but Short Rail/Stiffener.
100	HEAD REST : Unserviceableply to be replaced by 3 mm thick ply wood both sides of Head Board one side teak facedand other side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI markedincluding teak wood beading all around and 1/2 cut 12 mmdia beading made to shape as shown on drg or directed byEngr-In-Cahrge.
101	FOOT REST : All as per Srl ItemNo. 13.04 above but foot rest.
102	HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4\"x4\"x6mm, suitable type of MS Screws. All as per drg and as directed by Engr-in-Charge
103	FOOT REST : All as per Srl ItemNo. 13.06 above but foot rest.
104	S&F Wooden Corner Brackets of size 100x100x35mm between legs and long rail.
105	M&L for Removing old unservicableupholstery including subsidiary itemslike FRC sheet,Markeen cloth, Hassian cloth, Spring, Cushion100mm thick and tapestry cloth ofSofa Setsand S&F thenew approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Hassian cloth, New Spring and Cord , Cushion100mm thick of 40D and tapestry cloth ofSofa Sets with Melamine polish on wooden surfaces exposed to view after completion of upholstery work. Note : Colour, shade,texture, design/pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. Complete all as directed by Engr-in-Charge for the followings :
106	REPAIR TO FULLY UPHOLSTRED SOFA SET (SINGLE SEATER) (TP)
107	REPAIR TO FULLY UPHOLSTRED SOFA SET (TWO SEATER) (TP)
108	REPAIR TO FULLY UPHOLSTRED SOFA SET (THREE SEATER) (TP)
109	S&F SS Legs of height 75mm as approved by Engr-in-Charge
110	CHAIR CBA STEEL WITH ARMS (FD-75)
111	Labour forremoving the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made fromcommercial plywood 12 mm thick and 50 mm thick 40 Dfoam cushion, duly coveredwith cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge.
112	All as per Sl. No. 15.01 but for Back of Chair CBA Steelof size 460x380mm
113	M&L for welding with 25 x 3.0 mm MS flat iron 510 mm long with holes to fixscrews to seat/back frame for fixingsheet/back frame including screws complete all as specified and as directed for Chair CBA Steel (FD 75 (M)
114	S&F new PVC Caps.
115	S&F new IInd class hard wood/PVC arms as per sample.
116	CHAIR CB STEEL WITHOUT ARMS (FD-75)
117	Labour forremoving the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made fromcommercial plywood 12 mm thick and 50 mm thick 40 Dfoam cushion, duly coveredwith cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge.
118	All as per Sl. No. 16.01 but for Back of Chair CBA Steelof size 460x380mm
119	S&FMS flat iron 25 x 3 mm duly welded to seat/Back frame of chair CB/CBA steel for fixingseat/back frame including screws complete all as specified and as directedby the Engineer-in-Charge.
120	S&F new PVC Caps.
121	Labourfor cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty including tightening of loose joints if any and applying two coats of french polishfor the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site)
122	Bed plywood top FD - 213/246
123	Sofa set 5 seater FD - 281/373/258
124	Sofa set seater single chair ( FD-281/373/258)
125	Chair Easy Cushioned
126	Chair Dining Offrs
127	Dressing Mirror Gents
128	Table dressing Ladies

Tender For Repairing Of Sofa Set And All Types Of Cushions Chairs, Bed, Charpai At Af Stn Bhuj, Bhuj-Gujarat

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us