|
| 1 | BOQ (Comprehensive Maint work of SMQ Area at Maru Vihar in Domestic Area at AF Stn Suratgarh) |
| 2 | Demolition of brick masonry built in cement mortar including all quoins, archesand removing from site etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 completeall as specified and as directed by Engr-in-Charge. |
| 4 | All as per Ser item No 2 here in before but using old bricks |
| 5 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 7 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 8 | M&LforPressedsteelframesofsize105mmx60mmmadeof 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 9 | M&LforPressedsteelframesofsize125mmx60mmmadeof 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 10 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frameincluding necessary form work all asspecified. |
| 11 | S&F 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed. |
| 12 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 13 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plaincolourPVCsheetreinforcedwithMS squaretube,supplied andfittedinopeningsasperspecificationanddrawingshownin SSR Part-II, complete all as specified. |
| 14 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 15 | S&Fbutthinges,mediumweight,coldrolled,mildsteel100mm long (ISI marked), complete all as specified. |
| 16 | S&F Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 17 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 18 | S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, castorexcludedsectionsandfixingboltsandslidingboltsof excluded sections or cast aluminum alloy and fixed, complete all as specified. |
| 19 | S&F galvanised Steelwire cloth0.56 mmnominaldiaofwire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 20 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 21 | Supply and fix in replacement factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,butt hinges ,peg set of three etc including two coat of synthetic paint over primer complete all as specified and directed. |
| 22 | S&Fstainlesssteel 20mmdia curtainrod thickness of pipe not less than 1.0 mm includingstainless steel brackets and stainless steel end knobsfixedwith plugs & screws, complete all as specified and directed. |
| 23 | Taking downcement plasteronbrickorconcrete wallsurfaces etcincludingraking out joints,hackingforkey,scrubbingdown withwater and removing rubbish from the premises etc. complete all as specified and directed. |
| 24 | M&Lfor10mm thick rendering incementmortar 1:6 onfair faces of brick work or concrete surfaces finished even and smoothwithoutusingextracementas on wall completeall as specified and directed. |
| 25 | Material and labour for 15mm thick rendering in cement mortar 1:4 mixed with approved water proofing compoundon fair facesofbricksurfacesor concretesurfaces,surfacefinished even and smooth without using extra cement allas specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 26 | M&L for 5 mmthickrenderingin cement mortar1:3on concretesurfacesofroofprojection/ ceiling andsurfacefinished evenandsmoothwithoutusingextracement,completeallas specified and directed. |
| 27 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 28 | M&Lforpreparationofnew plasteredorunplasteredsurfacesof wallandapplyingtwocoatsofoilemulsiondistemperover 1.5 mmthickJK/Birlawallcareputtyto achievesmoothfinishsurface,completeallas specifiedand directed. |
| 29 | M&L for complete removal of existing treatment from wall surfaces andapplyingtwocoatsofoilemulsiondistemperover 1.5 mmthickJK/Birlawallcareputtyto achievesmoothfinishsurface,completeallas specifiedand directed. |
| 30 | M&Lforpreparationofnew plasteredorunplasteredsurfacesof ceiling andapplyingthreecoatsofwhitewash,completeallas specified and directed. |
| 31 | Applying two coats of exterior acrylic emulsion (weather proof treatment ), in plain patterns, over new plastered surfaces , including preparation and using primer,complete all as specified and directed. |
| 32 | M&L for complete removal of old existing treatment from wall surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, oversurfaces , including preparation and using primer,complete all as specified and directed. |
| 33 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 34 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 35 | Dismantlingfloor,hearthorwalltilingincludingcementmortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 36 | M&L for 1st quality coloured glazed ceramic tiles of approved shade ofsize 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointedinneatcementslurryandpointedinwhiteorcoloured cement to match,laid over and including 10mm thick rendering in cement mortar 1:4,complete all as specified and directed. |
| 37 | M&L for1st quality anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tilesexceeding 0.11 Sqm butn exc 0.18 Sqm,in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6,complete all as specified and directed. |
| 38 | M&L for 1st quality anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tilesexceeding 0.18 Sqm butn exc 0.36 Sqm,in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6,complete all as specified and directed. |
| 39 | M&L for first quality, non skid ceramic coloured tiles, 7mm to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement paste ofhoney like consistancy and pointed in white or coloured cement to match the shadeof tiles, complete all as specified and directed. |
| 40 | Demolition of stone slabs/paver block and tiles of any description or thickness infloors,apronsetc.,laid,beddedandpointedinanymortar, complete all as specified and directed. |
| 41 | M&Lformachinecutpolishedkotastoneslabflooring of size of Kotastone 550 mm x 550 mm and 18-20 mm thickovercementscreedbaselaid andjointedwithgrey cement slurry mixed with pigment to match the shade of the slab,laid over andincluding20mmthick screedbedincement mortar1:6, rubbing,grindingandpolishingtoachievemirrorfinish,complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 42 | M&Lforpolishedkota stoneslab 18-20 mmthick inriser of steps,skirting,dado andpillar laid over cementscreed and jointed with greycement slurrymixed withpigment to match theshade oftheslab, laidoverandincluding10mmthick renderingincementmortar1:4, rubbing,grinding,roundingof edges andpolishingtoachievemirrorfinish,completeallas specified and directed.Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 43 | M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and likeincluding pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external,including demolition of stone slab and tiles of any description or thicknesscomplete all as specified and as directed. complete all as specified and directed. |
| 44 | S&F in replacement vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern andlush pipe). Complete all as specified and directed. |
| 45 | S&F in replacement viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed. |
| 46 | S&Finreplacement,PVCvalveless,dualtype,syphonicactiontype flushingcistern,10litrescapacity,plungertype,lowlevel,white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 47 | Supply and fixingin replacement, wash hand basin vitreous china flat back 550 x 400 mm size white, first quality, with and including PVC waste coupling 32mmsize,PVCwastepipe32mmbore,bracketsofMildSteel angle iron (35mmx35mmx5mm) of suitable size including two coat ofsyntheticenamelpaintoveracoatofprimeroverangleiron brackets to walls complete all as specified and as directed. |
| 48 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 49 | S&F as in replacement 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and flynuts, screwed for iron pipe |
| 50 | S&Finreplacement stop/anglevalves,15mmbore,fancytype,chromium plated,castcopperalloy, screwed down,highpressurewith crutchor butterfly handle,both endsscrewed foriron pipe orfor union etc., complete all as specified and directed. |
| 51 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washersat both ends, complete all as specified. |
| 52 | S&F in replacement Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified. |
| 53 | S&F in replacementbib tap,15mm bore,fancy type,chromium plated, castcopperalloywithcrutchorbutterflyhandlescreweddown, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 54 | S&F in repairsbrass chromium plated grating 125mm dia with hole wate, complete all as specified and directed. |
| 55 | S&F in replacement and laying of 16 mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings laid in trenches, to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge. |
| 56 | S&F in replacement and laying of 20mm outer dia CPVC pipes SDR 13.5 & PlainCPVC SDR 11 fittings laid in trenches, to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge. |
| 57 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including20mmfor ball valve brass high pressure, with polythene float and fly nutcomplete all as specified and directed. |
| 58 | M& L in replacement for 18mm thick solid HDHMR board with 0.9-1.20mm thick sunmica leminated sheet on both side of two different colours (colour finish) as in kitchen cabinet shutter,jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel pianohinges suitable for 18/19 mm HDHMRBoard (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome DoorHandle 100mm long (01 Nofor each leaf of shutter), complete all as specified and as directed.Note: (a) Quoted unit Rates are inclusive of PVCboard, hinges, screws and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. |
| 59 | Dismantlingfor Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified. |
| 60 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mmthick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructionscomplete all as specified and directed. |
| 61 | M & L rolled mild steel as in framing for cladding and the like fixed with angle cleats and connecting plates Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge |
| 62 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 63 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish from the premises. complete all as specified and as directed. |
| 64 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. |
| 65 | M&L for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching, complete all as specified & directed. |
| 66 | M&L for Plain cement concrete 1:2:4type B-I (20mm graded stone aggregate) 50 mm thick as flooring finished, complete all as specified and directed by Engineer-in-Charge |
| 67 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 68 | S& F in replacement factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section. Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill and necessary formwork complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of \"Z\" section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing wire gauge to gauge window Glass pane, wire gauge and synthetic enamel painting work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respectiveii) Design shall be got approved from the Engineer-in-charge |
| 69 | M&L for vitrified coloured chequred tiles of size 300 mm X 300 mm x 9-10 mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match the shade of tiles,laid over 15 mm thick screed bed in CM 1:6 including coping at sides pcc 1:2:4 & including dismantling of existing tiles.complete all as specified and directed by Engineer-in-Charge. |
| 70 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and fixing as in replacement informatory Sign board of size 600mmx400mm made of ACP Sheet 3 mm thick with stainless steel rectangular frame 25 x 15 mmall around retro reflective high intensity 400 micron thick blue/white colour sheet pasted with heating process on both bsides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter and in proper manner incidating Shed Noas directed by Engr in charge.02 Nos 50 mm dia stainless steelpipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided the board and overall height of 1.0 m (top levelof board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300mmx300mmx600mm. complete all as specified and directed. |
| 72 | Waterproofingmembrane:Supplying and applying water-based ,single component UV resistant elastomeric PU liquid membrane coatingapplied with brush/roller having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240. The system includes final base preparation as per note given below, applying Home Sheild PU ELASTOSEAL BTD or approved product in three coats at 1.85 kg per Sqm providing min 1 mm DFT , complete as per Manufacturer specifications along with 45 GSM Fiber mesh sandwiched between 1st and 2nd coat . Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300mm aboveFFL whichshould be sealed with Polymer Mortar. Additional layer of geotextile membrane for the protection of waterproffing membrane .The application will be executed by company authorised applicator upon verification from the company.Before tratment, repair of roof should be done by contractor as required (CM pointing 1:4 and PCC 1:2:4) |
| 73 | Surface Preparation: i) The surface to be treated should be sound and free from all types of dirt, dust and debris. Clean surface by brushing, scraping or chipping to eliminate all defective materials and foreign matter. Proper surface preparation needs dry mechanical grinding to expose base Substrate. Making of angle fillets(75mm*75mm) all around the periphery of the wall with polymer modified mortar using SBR Latex Plus.ii) All construction joints and cracks >1mm shall be treated by cutting V groove and filling with polymer modified SBR Latex and reinforced with geotextile membrane dipped in PU liquid Membrane before the 1st coat application. |
| 74 | M&L for Raking out cement/cement mortar in joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc. with and including Flush pointing tobricks laid flat or brick tiles in CM 1:3mixed with liquid water proofing compound. Complete all as specified and directed |
| 75 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. |
