|
| 1 | BOQ (Comprehensive Maint works of OMQ Area at Akash Vihar in Domestic Area at AF Stn Suratgarh) |
| 2 | Demolition of cement concreteunreinforced in groundfloors andpavingsnot exc 15cm thickness below or above ground level and removing rubbish from the premises etc all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for 75 mm thick PCC (1:3:6)type C-2 using 40 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight all as specified and directed by Engr-in-charge |
| 4 | M&L for Plain cement concrete 1:2:4type B-1 (20mm graded stone aggregate) 40 mm thick as flooringfinished even & smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge |
| 5 | Demolition of stone slabs/paver block and tiles of any description or thickness infloors,apronsetc.,laid,beddedandpointedinanymortar, complete all as specified and directed. |
| 6 | M&L for 18-20 mmthick Granite (of any type/colour) as approved by GE/AGE work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.incuding screed bed or bedding layer of mortar 20 mm thick for laying floor finish in CM (1:6). Complete all as specified and directed. |
| 7 | M&Lformachinecutpolishedkotastoneslabflooringwith Kota stone of size not less than 550 x 550x 18-20mm thickovercementscreedbaselaid andjointedwithgrey cement slurry mixed with pigment to match the shade of the slab,laid over andincluding20mmthick screedbedincement mortar1:6, rubbing,grindingandpolishingtoachievemirrorfinish,complete all as specified and directed. |
| 8 | M&Lforpolishedkota stoneslab 18-20mmthick inriser of steps,skirting,dado andpillar laid over cementscreed and jointed with greycement slurrymixed withpigment to match theshade oftheslab, laidoverandincluding10mmthick renderingincementmortar1:4, rubbing,grinding,roundingof edges andpolishingtoachievemirrorfinish,completeallas specified and directed.Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 9 | Demolition of brick workbuilt in cement mortar includingall quoins, arches, pillars etc and removing from site, complete all as specified and directed. |
| 10 | M&L for brick work with sub class \"B\" bricks, straight or curved on planexc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ) and removing rubbish off the premises, complete all as specified and directed. |
| 12 | M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as infloors etc set & jointed in neat cementslurry and pointed in white or coloured cementto match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge. |
| 13 | M&L for Vitrified ceramic tiles 10mm thick (square/ rectangular)area of each tiles not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including provision of 15 mm thick screed bedding in CM (1:6), complete all as specified and directed. |
| 14 | M&L for Vitrified ceramic tiles 10 mm thick ( Square/ rectangular) area of each tiles not exceeding 0.36 Sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including provision of backing coat of 10mm thick in CM (1:4), complete all as specified and directed. |
| 15 | S&F 1st quality glazed ceramic tiles of size 350x250x7mm /450x350x7 mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge. |
| 16 | M & L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding screed bed or bedding layer of 15 mm thick cement mortar(1:6) complete all as specified and directed. |
| 17 | Ditto all as per item Noabove but as indado, riser & skirting over & incl 10mm thick rendering in CM 1:4 |
| 18 | M&L for Chequered cement concrete tiles 300x300x25mm thick, set, jointed and pointed in neat cement slurry in floorswith grey cement and pigmentincluding 20 mm thick screed bed or bedding layer for laying tiles in CM 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L for heavy duty vitrified coloured parking tiles of size n.exc 0.18 sqm each12-15 mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match the shade of tiles,laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises complete all as specified |
| 21 | M&L for rendering 10mm thick plaster on brick or concrete surfaces in cement mortor (1:6) finished the surface even and smooth without extra cement as intrnal surfaces of wall. Complete all as specified and directed. |
| 22 | M&L Rendering 15mm thick using water proofing compound 3% by weight of cement on concrete or brick masonry surfacesin CM (1:4) as in external surfaces of wall. Complete all as specified and directed. (WPC shall be measured and paid seperately). |
| 23 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 24 | M&L for 5 mm thick, plaster in cement mortar (1:3) on surfaces of ceilingand finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge. |
| 25 | Supply only integral water proofing compound. |
| 26 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over 2 mm thick wall care putty all as specified & directed by Engineer-in- Charge. |
| 27 | M&L for two coats of white wash on newly plastered ceilingsurfaces including preparation of surfaces complete all as specified & directed by Engr -in-Charge. |
| 28 | M&L Preparing New Plastered Surfaces of Walls applying Two Coats of Exterior Emulsion Paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer\"s instructions), complete all as specified and as directedby Engineer-in-Charge. NOTE: Rates quoted by the tenderer shall be deemed to beincluded with following application as under :-(a)The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry.(b)All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. |
| 29 | M&L for Complete Removal of existing Treatment and applying 2mm thick wall care putty, rubbing to obtained a Smooth Surface, applying Two Coats of Exterior Emulsion Paint (in Plain/New Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer\"s instructions), complete all as specified and as directedby Engineer-in-Charge.NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a)The surfaces shall be cleaned to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry.(b)All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. |
| 30 | Supply and fix rotational moulded polyethylene water storage tanks white coloured three layered (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity with & including, 20mm dia Ball brass valves, high pressure, with polyethylene float, fly nut and dismatling of existing tank complete, screwed for iron pipe or brass ferrule and fixed |
| 31 | Supply and fix rotational moulded polyethylene water storage tanks white coloured three layered (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float, fly nut and dismantling of existing tank complete, screwed for iron pipe or brass ferrule and fixed |
| 32 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittingsfixedto walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site.complete all as specified and directed |
| 33 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittingsfixedto walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe and removal from site.complete all as specified and directed |
| 34 | S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in replacement to 20 mm bore pipe. |
| 35 | S&F in repair PVC tank lid (cover) Suitable for 500/1000 Ltrs capicity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on building, complete all as specified and directed. |
| 36 | S&F in replacement for stop/angle cock copper alloy but fancy type and chrominum platedscrewed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore. |
| 37 | S&F in replacement bib taps cast copper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs |
| 38 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each and removing from site. |
| 39 | All as per item above but size not execeding 1.5 Sqm. |
| 40 | Taking down door shutter exc 1 sq. m and n exc 2 sqmeach and removing from site. |
| 41 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels with 0.9mm Decorative laminate type 1 of surface finish on boith sides/faces, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as per direction of Engineer-In-Charge. |
| 42 | S & F, 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge. |
| 43 | S & F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. Complete all as specified and as directed by the Engineer-in-Charge |
| 44 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm. complete all as specified and as directed by the Engineer-in-Charge |
| 45 | Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screwwithdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width ofrofile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 46 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel buttinges and necessary S S screws shall be paid separately) |
| 47 | S&Fmild steelbutt hinges medium weight 100mm size as specified & directed by Engineer-in-charge. |
| 48 | S&F300mm longaluminium alloy, anodised, sliding door bolt with harp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed. |
| 49 | S&F Aluminium handle, cast type, anodised of size 125 mm & fix to shutter complete all as specified & directed by Engineer-in-Charge. |
| 50 | S&F Aluminium anodised, barrel tower bolt of extruded sectionof length 200mmcomplete all as specified & directed by Engineer-in-Charge. |
| 51 | S & F in replacement Vitreous china wash basin white flat back 550 x 400 mm with pedestal including fitting of stainless steel waste coupling 32mm suitable size ,PVCwaste pipe ,angle iron brackets with painting of brackets etc including Cp grating completeall as specified and directed. |
| 52 | S & F inreplacement 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Complete all as specified and directed. |
| 53 | S& F in replacement Soap dish, any type, fixed to plugs with chromium plated brass screws |
| 54 | S&F in replacement towel rail 600 mm long of Brass C.P \"D\" type fixed with and including chromium plated brass screws and wooden /plastic cheats in repairs |
| 55 | S & F in replacement brass CP mixerfancy type,for WHB , kitchen sink etc. screwed down high pressure, with or without lettered ‘hot’ & ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed. |
| 56 | S&f in replacement wall mixer 15mm with L bend/telephonic fancy type castcopper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified. |
| 57 | S&F in replacement sinks drtainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1145mm x 510mm bowl size 560mm x 410mm x 250mm including Cp gratingcomplete all as specified. |
| 58 | S&F in replacement European type vitreous China wash down water closet pan (pedestal pattern), white,includingplastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device including Cp grating. complete all as specified and directed. |
| 59 | S&F in replacement Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral footrest (exclusive flusing cistern & flush pipe) including cast iron \"P\" or \"S\" trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair,complete all as specified and directed by the Engineer in Charge. Make |
| 60 | S&F as inreplacement coloured (as approved) vitreous china wash down water closet with cascade type fitting with syphonic action dual type flushing cistern in single piece pattern with inlet, ball valve, float and double push button, incl fixing bolt, plastic water closet seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with one toilet paper holder, one health faucet and one CP jet spray with 2 x 1 m CP flexible tube complete all as specified and directed. |
| 61 | S&F PVC connections 15 mm size with PTMT nuts to length 450 mm as in replacement. |
| 62 | S&F in replacement PVC valveless, syphonicaction type, flushing cistern, 10 Ltr capacity low level, white, with inlet,ball valve, float and handleincluding brackets and connections to pipes andfixing of chain and pull, or lever,complete all as specified and directed by the Engineer in Charge |
| 63 | S&F as in replacement PVC (SWR) pipes of 110 mm dia, single socketed in any length with rubber ring joints fixed to walls |
| 64 | S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof. |
| 65 | S&F PVC (SWR) bends with access door of 110 mm bore any radius complete all as specified and directed. |
| 66 | S&F as in replacement PVC (SWR) pipes of 75 mm dia, single socket in any length with rubber ring joints fixed to walls |
| 67 | S&F PVC(SWR) bends with access door of 75 mm dia, any radius. Complete all as specified and directed. |
| 68 | M&L for factory made steel windows box type using ERW hollow \"P\" section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40mmx4mm complete including grill of 10mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with/Without Cooler Provisioncomplete all as specified and directed.Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit.(ii) Glazing and wire mesh shall be measured and paid for separatley. |
| 69 | S&F 3.00 mm thick sheetglass ordinary quality and glazingwith oilputty and rubber beadings for aluminum window in squaren exc 0.50 sqn in each pane. |
| 70 | S&F 3 mm thick figured glass, pin headed type and glazingwith oilputty in squaren exc 0.50 sqn in each pane. |
| 71 | Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified. |
| 72 | S&F in replacement stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed . |
| 73 | M&L for sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packingexc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge |
| 74 | M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge. |
| 75 | M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge. |
| 76 | M&L for preparing new/previously untreated steel surfaces of any description over10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer |
| 77 | M&Lfor 18-19 mm thick solid HDHMR board with0.9 -1.20 mm thick sun mica laminated sheet both sideof two different colours(colour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc with & including taking down of existing cupboard complete all as specified & dir |
| 78 | M&Lfor 18-19 mm thick solid PVC board with approved pattern/laminated (colour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc with & including existing cupboard complete all as specified & dir |
| 79 | S&F0 degree clip type self closing hinges for cabinets fixed with cadmum coated screws as per sample complete all as specified and directed. |
| 80 | S&F75mm size bright finished chromium plated steel handleof approved shape & design fixed with cadmium coated screws on the kitchen cabinet drawers complete all as specified and directed. |
| 81 | S&F stainless Steel Telescopic Drawer Channel/Runner 18-20 Inch with 3 Ball Bearing Weight Capacity Upto 45 kg complete all as specified and directed make. |
| 82 | M&L in replacement for stainless steel tray as per trade patternof various sizes for drawer to keep the kitchen utensil as directed. |
| 83 | M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 84 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (above or below ground level)and removing rubbish from the premises. complete all as specified. |
| 85 | M&L 75mm thick Cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in flooring. complete all as specified. |
| 86 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved design & pattern as in footpath or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand complete all as specified and directed by Engr-in-charge. |
| 87 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 88 | S&F mild steel rolled sections as in framing for cladding and the like fixed with angle cleats and connecting plates. complete all as specified and directed by Engr-in-Charge |
| 89 | Dismantling of plain or corrugated Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coveringscomplete all as specified. |
| 90 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour by Engrs-in-charge having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 91 | S&F 300 mm ,mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified & as directed. |
| 92 | S&F Health faucet (ABS body) mild steel chromimum plated auitale for 15mm dia pipe with 1.25m long long flexible tube ABS wall hook including making connections and fixed and complete all as specified |
| 93 | Supply and fixing in replacement cutrain rod 20mm dia of thickness not less than 1.0 mm stainless steel with fixingbrackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed. |
| 94 | S&F in replacement brass chromium plated shower roses with swivel joints, 125 mm sizein square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 95 | S&F in replacement glass corner shelf 12\" with brass brackets of heavy duty and thickness of glass min 6mm and railing 60cm long fixed all as directed |
| 96 | M&L for Raking out cement/cement mortar in joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc. with and including Flush pointing tobricks laid flat or brick tiles in CM 1:3mixed with liquid water proofing compound @ of 2% in pavings Complete all as specified and directed |
| 97 | Supply & fixing powder coated aluminium (minimum thickness of powder coating not less than 50 micron) sliding windowthree track with frame &two numbers glass shutters using 4 mm thick glass (tinted ) and one number shutter with stainless steel wire gauge wire cloth 0.31 mm nominaldia of wire and width of aperture 1.61 mm complete window using aluminium powder coated sections including aluminium cleat, PVC track, bearing, handle lock, rubber beading, beading for securing the wire cloth etc complete fittings as approved and directed. Size of aluminium sections for frame and shutters shall be as under :-(A)Three Track Frame :-(a)Bottom frame :- Jindal 2010, Section 20620 orTechno commercial equivalent as approved by GE.(b) Top and vertical frame -Jindal 2010, Section 20621 or Techno commercial equivalent as approved by GE |
| 98 | Supply only chain link MS galvanised fencing,any type or sizeas approved by Engr-in-charge complete all as specified and directed by E-in-charge. |
| 99 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by E-in-charge |
| 100 | Supply and fix as in replacement mild steel cupboards shutters with 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle , two shelve sbuttt hinges ,peg set of three,etc including two coat of synthetic paint over primer with wardrobe complete all as specified and directed. |
| 101 | M & L prepration of surface and providing Waterproofing membrane moisture cured, Polyurethane elastomeric liquid membrane waterproofing coating cold applied with brush/roller, with an elongation of >500% and tensile strength of 2 MPa as per ASTM D 412, 90 % Solid Content, shore A Hardness of min 50 as per ASTM D 2240, The system includes final base preparation as per note given below, PU primer application at8Sqm/L andapplying Home Sheild PU ELASTOSEAL NON-UV 1K or approved equivalent in two coats at 1.8 kg per Sqm providing 1.5 mm DFT, complete as per Manufacturer specifications, Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300mm aboveFFL whichshould be sealed with Polymer Mortar complete all as specified and directed for work in building/structure.complete with and cleaning of existing treatment free from dust,durt and unwanted vegitation Complete as per manufacturer instruction. |
| 102 | Note for item no. 100:-Surface Preparation:a)The surface to be treated should be sound and free from all types of dirt, dust and debris. Clean surface by brushing, scraping or chipping to eliminate all defective materials and foreign matter. Proper surface preparation needs dry mechanical grinding to expose base Substrate. Making of angle fillets(75mmx75mm) all around the periphery of the wall with polymer modified mortar using SBR Latexb) All construction joints and cracks >1mm shall be treated by cutting V groove and filling with polymer modified SBR Latex and reinforced with geotextile membrane dipped in PU liquid Membrane before the 1st coat application. |
| 103 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents. |
