|
| 1 | [SCHEDULE \"A\" PART-I [B/R WORKS] |
| 2 | Excavationintrenchesnot exceeding 1.5 Mdeepfor foundation etc and getting out in hard/dense soil all as specified and directed. |
| 3 | M&L for PCC in foundations, plinth beams, filling and mass concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed. |
| 4 | M&L for formwork flat or curved to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter all as specified and directed. |
| 5 | M&L for formwork to sides of square pillars, posts, struts, piers, columns and stanchions fair finished complete all as specified and directed. |
| 6 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | All as above item No. 1.05 above,but 5 mm dia and over upto and including 10mm dia in stirrups , spacers & binders complete. |
| 8 | M&L for reinforced cement concreteM-30 (Using 20mm graded stone aggegate) in foundations, including rafts, footings, foundation beams, plinth beams, lintel beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 9 | M&L for Reinforced cement concreteM-30 (Using 20mm graded aggegate) Ready mix concrete uas as in columns, pillars, piers,posts and struts complete all as specified and directed. |
| 10 | M&L for 100mm thick Ccement concrete type B- 2,1:2:4 (using 40mm graded stone aggregate) as in sub base of flooringcomplete all as specified and directed. |
| 11 | S&F steel work in tubular trusses, pole including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to I. S.1161- complete all as specified and directed. |
| 12 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410- W(Gde E-250) quality-B complete all as specified and directed. |
| 13 | M&L Mild steel screw bolts of 20 mm dia neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed. |
| 14 | M&L for preparation of steel surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of zinc chromateprimer complete all as specified and directed. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated semi corrugated,,trapezoidal or any profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in chajjas, roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | Returning and filling in hard /dense soil, including, spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 17 | Removing excavated soil material not exc. 50m and depositing where directed at a level notexc. 1.5M abovethe starting point all as specified and directed. |
| 18 | M&L for 100mm thick PCC 1:3:6 type D-2 (using 40mm graded stone aggregate) as in sub base for floors complete all as specified and directed. |
| 19 | M&L for chequered cement concrete tiles with grey and any pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and incl cement screed 15mm thick in 1:6all as specified and directed |
| 20 | [SCHEDULE \"A\" PART-II [E/M WORKS] |
| 21 | S&FLED high bay light 200 watt at roof truss level of workshop buildings and other placesall as specified and directed. |
| 22 | S&F modular switch socket outlet 2 in 1, 3 pin 5 amp with modular cover plate for 3 module & PVC boxes all as specified and directed. |
| 23 | S&F Ceiling rose,3 phase /PVC/ polycarbonate,isolated body all as specified and directed. |
| 24 | S&F SP MCB 6 to 32 Amps C Curve complete all as specified and directed |
| 25 | S&F TP MCB 40 Amps C Curve complete all as specified and directed. |
| 26 | S&F MCCB, 36KA, 4 pole, with thermal magnetic trip unit, rated current 125 amps complete with spider link all as specified and directed (Suitable for MCCB incomer DB). |
| 27 | S&Fvertical MCB distribution board suitable for MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way all as specified and directed. |
| 28 | M & L for sub main wiring with 2 runs of 4 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 4 sqmm FRLS grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium gradediawithconduit accessories all as specified and directed. |
| 29 | M & L for sub main wiring with 2 runs of 1.5 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 1.5 sqmm FRLS grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLS ISI marked stove enamalled Steel conduit medium gradediawithconduit accessories,all as specified and directed |
| 30 | M & L for sub main wiring with 2 runs of 2.5 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 2.5 sqmm FRLS grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLS ISI marked stove enamalled Steel conduit medium gradediawithconduit accessories,all as specified and directed. |
| 31 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 4 core complete all as specified and directed. |
| 32 | S&F metal plug and socket board with MCB single pole 20 amps, 16KA all as specified and as directed. |
| 33 | Supply and fix air circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting all as specified and as directed. |
| 34 | M&L earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip32x6 mm by means of nuts, bolts check nuts, washers of galvanised iron or steel all as shown in electrical plate No:5 of SSR Part I connected to earth test point including excavation work in any strata pcc chamber withPCC cover slab with GI protection pipe 40 mm dia light gde upto 7.5 mtr/20 mm dia tunnel pipe med grade all as specified and directed. |
| 35 | S&F PVC junction box of outdoor type, weather proof, with provision of hole at bottom for cable entry, hinged door with locking arrangement, of size not less than 200mm (L) x 100mm(B)x 300mm (H) incl taking down unserviceable one, fixed to pole with MS clamp, nuts, bolts and washers complete including complete connection all as specified and directed. |
| 36 | M&L for supply and fixing of MS Cabinet Outdoor type suitable for wall mounting made up of 3mm MS sheet of suitable size must be dustproof and Water Proof with lock and key for housing 01 Nos VTPN DB 4 way all as specified and as directed |
