|
| 1 | Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.(Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 3 | Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 4 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 5 | Providing, laying and spreading Material on a prepared Sub Base cement @ 4% by weight to the spread Material Manually mixing in place with rotavator and compacting with the road roller at OMC to achieve the desire unconfined compressive strength and to form a layer of base.(Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 6 | Providing and applying tack coat with Bitumen (VG-10) using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.(Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 7 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.(Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 8 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 9 | Reinforced cement concrete M20 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 10 | Reinforced cement concrete M20 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 11 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 12 | Bedding for Pipe (i) Type A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) II. P.C.C grade M 15 (i) Nominal mix (1:2.5:5) (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 13 | Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 (A) Brick Masonry in 1:4 cement mortar (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 14 | Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 15 | Pointing with Cement Mortar (1:3) on brickwork as per technical specification Clause 613.3 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 16 | Plastering with Cement Mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) |
| 17 | White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (Rates are including all materials, Labour, T&P and Taxes but Excluding GST.) Please Enable Macros to View BoQ information |
