Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 2.80 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 2.25 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO.2.25A |
| 4 | Supplying and filling in plinth with river sand under floors including, watering, ramming consolidating and dressing complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 2.27 |
| 5 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 2.34.1 |
| 6 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 2.35.3.1 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 4.3.1 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 4.3.1 |
| 9 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 4.11 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.1 |
| 11 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.2 |
| 12 | Suspended floors, roofs, landings, balconies and access platform. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.3 |
| 13 | Shelves (Cast in situ) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.4 |
| 14 | Lintels, beams, plinth beams, girders, bressumers and cantilevers Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.95 |
| 15 | Columns, Pillars, Piers, Abutments, Posts and Struts. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.6 |
| 16 | Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.15 |
| 17 | Edges of slabs and breaks in floors and wallsUnder 20 cm wide. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.9.16.1 |
| 18 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth & above plinth level. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.22Thermo-Mechanically Treated bars of grade Fe-500D or more. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.22.6 |
| 19 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 5.33.1.1 |
| 20 | All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.33.2.1 |
| 21 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 6.1.2 |
| 22 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super str. :Cement mortar 1:4 (1 cement : 4 Coarse sand). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 6.34.1 |
| 23 | Half brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super str. :Cement mortar 1:4 (1 cement : 4 coarse sand) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 6.13.2 |
| 24 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 6.15 |
| 25 | Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch uInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.Area of slab over 0.50 Sqm.( For Counter). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 8.2.2.2 |
| 26 | Extra for fixing marble / granite stone over and above corresponding basic item, in facia and droInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 8.4 |
| 27 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS etc. including rubbing and polishing of cut edge etc. complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 8.5 |
| 28 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 8.10.2 |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 8.31 |
| 30 | WOOD & PVC WORKProviding and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.21.1 |
| 31 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.23 |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.48.1 |
| 33 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :300x10 mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.97.1 |
| 34 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.97.4 |
| 35 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.96.1 |
| 36 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 9.98 |
| 37 | Providing and fixing aluminium handles of approved make anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessry screws etc. complete.125 mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.100.1 |
| 38 | Providing and fixing aluminium handles of approved make anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessry screws etc. complete.100mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.100.2 |
| 39 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.101.1 |
| 40 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 9.84 |
| 41 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 9.127.2 |
| 42 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 10.2 |
| 43 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile BFixing with adjustable lugs with split end tail to each jamb. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 10.14.1.1 |
| 44 | Providing and fixing bolts including nuts and washers complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 10.20 |
| 45 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS etc. complete.40 mm thick with 20 mm nominal size stone aggregate. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 11.3.1 |
| 46 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 11.26.1 |
| 47 | Extra for pre finished nosing in treads of steInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS of Kota stone/ sand stone slab. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 11.31 |
| 48 | Extra for Kota stone/ sand stone in treads of steInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS and risers using single length up to 1.05 metre. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 11.32 |
| 49 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 11.40 |
| 50 | Providing & Laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption\"s less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete.Size of Tile 600x600 mm. 11.41.2 |
| 51 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 11.46.2 |
| 52 | Providing and laying gola 75x75mm in cement concrete M15 grade including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 12.21 |
| 53 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 12.22 |
| 54 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 12.41.2 |
| 55 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler110 mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 12.42.1.2 |
| 56 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°110 mm bend Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR No. 12.42.5.2 |
| 57 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR No. 12.42.6.2 |
| 58 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 12.50 |
| 59 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coating thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete.Gutter (600 mm over all girth). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 12.51.6 |
| 60 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.4.1 |
| 61 | 15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1 cement: 4 coarse sand). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.5.1 |
| 62 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.16.1 |
| 63 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.26 |
| 64 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.New work (two or more coats) over and including waterthinnable priming coat with cement primer having VOC content less than 50 gram / litre. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.41.1 |
| 65 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.44 |
| 66 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.45.1 |
| 67 | Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.85.1 |
| 68 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.50.3 |
| 69 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.62.1 |
| 70 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 13.80 |
| 71 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 5.30 |
| 72 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing cliInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS, or with expansion hold fasteners including necessary filling up of gaInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Glazing and paneling to be paid for separately) : For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 21.1.1.2 |
| 73 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 21.1.2.2 |
| 74 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 21.3.2 |
| 75 | Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-chargeUpto 5mm depth and 5mm width. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 21.8.1 |
| 76 | Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound confirming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement of 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the. adjoining walls upto 300mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar 1:4 (1 cement : 4 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:With average thickness of 120mm and minimum thickness at khurra as 65mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 22.7.1 |
| 77 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 17.2.1 |
| 78 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 17.1.2 |
| 79 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 17.4.1 |
| 80 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 17.7.1 |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 17.28.2 |
| 82 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.48. |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.8.2 |
| 84 | 25 mm nominal dia Pipes. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.8.3 |
| 85 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.51.1 |
| 86 | Providing and fixing toilet paper holder : C.P. brass. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 17.34.1 |
| 87 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.53.1 |
| 88 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO, 17.31 |
| 89 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore . Horizontal. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.19.2.1 |
| 90 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore .Vertical. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 18.19.2.2 |
| 91 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 19.7.1.1 |
| 92 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 19.27.1 |
| 93 | 240Ft. Depth drilling charges including S/FR for 4 inch dia PVC pipe with 2 HP submersible pump set complete in all respect. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. MR |
| 94 | Supply and Installation of Bedminton Court PVC flooring 6 mm thick including Pasting,welding and line marking as per latest Specification. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. MR |
| 95 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.1 |
| 96 | Supplying and stacking at site.Good earth. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.3.9 |
| 97 | Supplying and stacking at site. Moorum. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.3.10 |
| 98 | Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete.New work (Two or more coats). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.47.1 |
| 99 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron \"Y\" shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. cliInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 16.53 |
| 100 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10 mm dia. etc. complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.19 |
| 101 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm). .1having CBR Value-30 Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO 16.78.1 |
| 102 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer\"s specifications & direction of Engineer in-Charge. 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.91.1 |
| 103 | 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.91.2 |
| 104 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR NO. 16.69 |
| 105 | Fine dressing of the ground. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. Horticulture (2.7) |
| 106 | Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). With grass Turf. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. Horticulture (2.10.2) |
| 107 | Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. Horticulture (2.10.2) |
| 108 | Providing and fixing of Cricket Net . Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. MR |
| 109 | Providing & fixing Volley Ball net of even thickness, minimum being 15mm and maximum 20mm,The depth of the net should be 2 feet 6 inches, including the Poles with two coats of red oxide primer with two or more coats of enamel paint complete. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. MR |
| 110 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR No. 19.32.1 |
| 111 | ELECTRICALElectrical Connection From Hydril Department. NS2. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. |
| 112 | Supply, installation, testing & commissioning of two 11Mtr. pole structure, 11KV with cross arms, suitable clamInclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS, insulators, disc insulators, 11KV lightning arrestors, complete stay with insulator & wire, foundations, gang operated air break switch with extended handle, 11KV drop out fuses. This shall have termination arrangement for outgoing through HT XLPE cable of suitable size and necessary 6 inches dia GI pipe shall be provided for cable support complete in every way.11 kV HT \"H\" pole as per specification & as described above. NS3. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. |
| 113 | Main panel as described above. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. |
| 114 | Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables suitable for working voltage upto and including 1100 Volts complete as required and as per specifications.2 x 6 sq.mm. N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.1A |
| 115 | Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copperconductor armoured cables suitable for working voltage upto and including 1100 Volts complete as required and as per specifications. 4 x 6 sq.mm.N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.1B |
| 116 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-7.1.1 |
| 117 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-7.5.1 |
| 118 | Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable including providing terminal lugs,double compression gland , crimping the joints ,providing insulation tape,effecting terminal connections to theequipment complete as required.2 x 6 sq,mm, Al conductor cable. N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.2 |
| 119 | Supply, laying and termination of the following sizes of 650/1100 volts grade PVCinsulated copper conductor wires in existing conduits including end terminations with copper lugs.3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-1.17.12 |
| 120 | Supplying and fixing in position of the following sizes of GI conduit buried in ground 600 mm deep including all accessories complete as required and as perspecifications.25 mm dia GI conduit. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-1202 |
| 121 | Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor withjoints and other accessories as required. 63 mm dia, 2mm thick. N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.3 |
| 122 | S/F of steel tublar pole 7 meterlong 410 sp1. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. |
| 123 | S/F of steel tublar pole 7 meterlong 410 sp2. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. |
| 124 | Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 40W Luminaire on existing 4 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light fixtureon pole. N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.5A |
| 125 | Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 90W Luminaire on existing 9 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light fixtureon pole.N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.5B |
| 126 | Supply,Receiving and fixing in position, effecting proper connections, testing andcommissioning of 35 W GATE LIGHT. N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.8 |
| 127 | Supply, installation Testing including civil foundation work & commissioning of fixed type high mast lighting tower (16 mtr.) with 8 Nos. 300 watt LED flood light fittings for outdoor lighting application.N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.10 |
| 128 | Feeder Pillar - X described as above and all as per specification. N Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -5.10 |
| 129 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and saltas required. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-5.4 |
| 130 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation andre-filling etc. as required. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-5.11 |
| 131 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc.as required. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. DSR -2022-5.7 |
| 132 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrandsinglecore copper conductor cable inpvc conduit copper earth continuity wire, piano type switch & ceiling rose/ angle/battenholder on 3 mm thick phenoliclaminatedbackelite sheetetc., complete in all respect, as directed including matching colour. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 131C |
| 133 | Same as item no. 1 but for fan point. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 133C |
| 134 | Same as item no. 1 but for Plug Point. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 134C |
| 135 | Fan regulator. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 1203.A |
| 136 | Supply & Fixing of 150 watt LED flood light. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO.1454 |
| 137 | Supply and wiringof submainswith 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated1100 V grade single core multistrandcopper conductor cable in existingPVC conduit complete, includingsupply of all material, labour and T & P etc. required for proper completionof the work as directed by Engineer in charge. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 291 |
| 138 | Supply and wiring of submain with two number 4 sq.mm. PVCinsulated1100 V grade singlecore copper conductor cabel in PVC conduit. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO.211C |
| 139 | S/F of LED tube light. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 1413/A |
| 140 | S & F surface/Flush mounting 12ways SPN distribution boardwithout additional metal door without MCB complete in all respect,as direct by Engineer in Charge. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO.1025./A |
| 141 | S/F 40amp-DP Isolator. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 1003/A |
| 142 | S/F 6-32A-MCB. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I. PS NO. 1002 |
| 143 | S/F of 1200mm Sweep Ceiling Fan. Inclugind supply of all materials, labour, T&P etc. Excluding GST as per direction of E/I Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
