Construction Work Of Library And Multipurpose Building In Government Degree College, Jainti (Almora)
Tender Value
2.56 Crore
Estimated cost
Bid Submission
19 Jan 2026
0 days left
EMD
5.12 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jainti → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction work of Library and Multipurpose Building in Government Degree College, Jainti (Almora)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical / manual means in foundation trenches or drains i/c lift upto 1.5 m, i/c disposal of surplus excavated soil within a lead of 50 m. |
| 2 | Filling available excavated earth in trenches, plinth in layers consolidating by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | P/L in position CC 1:4:8 (1 Cement : 4 c/sand : 8 st. agg. 40 mm size) excluding the cost of c/shuttering - All work upto plinth level. |
| 4 | P/L in position RCC 1:1.5:3 (1 cement : 1.5 c/sand : 3 stone agg. 20 mm size) ex. the cost of c/shuttering, finishing and reinf. - All work upto plinth level (in foundation). |
| 5 | RCC work 1:1.5:3 (1 cement : 1.5 c/sand :3 stone agg. 20 mm size) in walls (any thickness), all work above i.e. columns, etc. ex. cost of c/shuttering, finishing and reinf. |
| 6 | RCC work 1:1.5:3 (1 cement : 1.5 c/sand :3 stone agg. 20 mm size) beams,s/shades,shelf ,stair case,door bend and suspended slabs etc. ex. cost of c/shuttering, finishing and reinf. |
| 7 | Centering and shuttering i/c strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 8 | Centering and shuttering i/c strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. |
| 9 | Centering and shuttering i/c strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for :Stairs, (excluding landings) except spiral-staircases |
| 11 | Centering and shuttering i/c strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 12 | Reinforcement for R.C.C. work i/c straightening, cutting, bending, placing in position and binding all complete --TMT - bars. |
| 13 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 c/sand). |
| 14 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 Above plinth level upto floor V level |
| 15 | Brick work with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:6 (1 cement : 6 c/sand). |
| 16 | Half brick masonry with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:4 (1 cement :4 c/sand) |
| 17 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows 35 mm thick shutters Second class teak wood |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, i/c cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete. |
| 21 | Casement Window with Double Rebate Frame with two Side Hung Glazed Panel on outside and two Side Hung wire mesh Panel on inside and French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi point locking system, zinc alloy (zamak) powder coated handles with shoot bolt on both glazed and fly screen panel. Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) X (55 mm & above) (Height upto 1.8m).Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above)x (55 mm & above)& French (False) mullion (55 mm & above) x (60 mm & above) & metal grill (if required to be paid separately). |
| 22 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler Two track four panels sliding window |
| 23 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses et., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes |
| 24 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including ecessary excavation, levelling & dressing & finishing the top smooth. |
| 25 | Providing and fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb,lock jamb,bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges Profile E Fixing with carbon steel galvanised dash fastener of required dia and size |
| 26 | CC pavements 1:2:4 (1 cement : 2 c/sand : 4 stone agg. 20 mm size) i/c finishing complete. |
| 27 | P/F glass strips in joints of terrazo/ CC floors. -- 40 mm wide and 4 mm th. |
| 28 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, |
| 29 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 30 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 31 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 32 | 12 mm cement plaster of mix. 1:6 cement and coarse sand mortar. |
| 33 | 12 mm cement plaster 1:3 mortar finished with a floating coat of neat cement of mix : |
| 34 | 15 mm cement plaster of mix. 1:6 cement and coarse sand mortar in rough side of brick wall . |
| 35 | Distempering with oil bound washable distemper of app.brand (two or more coats) to give an even shade on new work over and i/c priming coat with cement primer. |
| 36 | Providing and applying white cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 38 | Painting wood work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand. |
| 39 | Painting Steel work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand. |
| 40 | P/F 4mm thick float glass panes with putty & nails. |
| 41 | Providing and fixing aluminium sliding door bolts, ISI marked as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 42 | Providing and fixing aluminium tower bolts, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm |
| 43 | Providing and fixing aluminium handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm |
| 44 | Providing and fixing aluminium hanging floor door stopper, ISI marked, as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 45 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound (b) laying second layer of Fibre glass cloth when the first layer is still green.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. |
| 46 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grans/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T of size 24x25 mm made of 0.30 mm thick (minimum) sheet,GIMetal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter |
| 48 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing Coupler 110 mm |
| 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing Bend 87.5° 110 mm |
| 50 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing Shoe (Plain) 110 mm |
| 51 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
| 52 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 53 | P/L Ceramic glazed floor tiles 300x300 mm 1st quality of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm th. cement mortar 1:4 (1 Cement : 4 c/sand) i/c pointing with white cement and pigment etc. |
| 54 | P/F 1st quality ceramic glazed wall tiles of approved make in all colours, shades except burgundy, bottle green, black of any size in skirting, risers of steps and dados over 12 mm th. bed of cement mortar 1:3 (1 cement : 3 c/sand) and jointing with grey cement slurry i/c pointing with white cement and pigment. |
| 55 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) in all colours and shades,laid on 20mm thick cement mortar 1:4 Size of Tile 600x600 mm |
| 56 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 Size of Tile 600x600 mm |
| 57 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design..With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 58 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws,joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) Extruded section profile size 42x50 mm |
| 59 | 30 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. |
| 60 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 61 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 62 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 63 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 64 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 65 | Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 66 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 67 | Providing and fixing mirror of superior glass of ractengular shape (Approved Quality) size 435x357 |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes |
| 69 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore |
| 70 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore |
| 71 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore |
| 72 | Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia |
| 73 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 74 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia |
| 75 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 76 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 77 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality 15mm nominal bore |
| 78 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .With float glass panes of 8 mm thickness |
| 79 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections Powder coated aluminium |
| 80 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm |
| 81 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm |
| 82 | Ridges plain (500 - 600mm) |
| 83 | Flashings/ Aprons.(Upto 600 mm) |
| 84 | Gutter (600 mm over all girth) |
| 85 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern |
| 86 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement |
| 87 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete Second class teak wood 35 mm thick shutters |
| 88 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)With 20x20 mm square bar |
| 89 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 30 mm thick |
| 90 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazedshutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.econd class teak wood |
| 91 | Providing wood work in frames of doors, windows, clerestory windows and other frames, Wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length Second class teak wood |
| 92 | Excavation in hilly area in soil by manual means i/c cutting and timbering of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20m. |
| 93 | Excavation in foundation for retaining & breast walls in alltypes of soils and rocks i/c lead, lift and disposal of surplus material. |
| 94 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. |
| 95 | H.P.Stone filling behind retaining wall/breast wall in back of walls i/c supply of all materials, labour T&P etc. required for proper completion of work. |
| 96 | RR stone masonary laid dry in breast wall, retaining wall i/c supply of all materials,labour etc. complete. |
| 97 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications P.C.C grade M 10 Nominal mix 1:2:4 |
| 98 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Nominal mix (1:2:4) R.C.C grade M 20 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Dec 19, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJan 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender