|
| 1 | Demolishing brick work (In Cement Mortar) manually by mechanical means including stacking of serviceablematerial and disposal of unserviceable material within 50 metres lead as per direction of EIC |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead, For thickness of tiles 10 mm to 25 mm |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of Cement mortar 1:6 (1 cement : 6 coarse sand) of class designation 7.5 in foundation and plinth in all shapes and sizes. |
| 5 | Providing & LayingHalf brick masonry with common burnt clay F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand) |
| 6 | Providing and laying Vitrified tiles in floor of Make : KAJARIA/AGL/Make approved by EIC (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of (size of Tile 600 x 600 mm) |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer),of Make : KAJARIA/AGL/Make approved by EIC, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size of tile is 600 X 1200 mm) |
| 8 | Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). |
| 9 | Providing & Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 10 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhatof Size: 65x100 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 11 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing withstainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 35 mm thick WPC Door Shutter |
| 12 | Earth work in excavation of all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for lift upto 1.5m, as directed by Engineer-incharge. |
| 13 | Providing and laying in position cement concrete of specified grade, work up to plinth level : PCC 1:4:8 (1 cement, 4 coarse Sand(Zone-III) derived from natural sources: 8 graded stone aggregate 40mm nominal size derived from natural sources) including curing levelling, etc., as directed by EIC |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Providing & Fixing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth levelfor Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 16 | Providing Centering and shuttering including strutting, propping etc for Foundations, footings, bases for columns. The cost also includes removal of form work on completion. |
| 17 | Supply and fixing in position powder coated aluminum fully glazed windows of approved colour using Aluminum 3 track box section frame with top and verticle sides and for frame bottom using sliding shutters made out of aluminum sections, inside the h-section for top and bottom and plain section for ends including making window weathering seal proof and mounted in fibre wheels 2 nos for each shutter and fixed 5 mm thick plain float glass 1st quality with necessary PVC rubber beeding alround including providing 2 nos maruti lock cleat for window with 7.5mm thick aluminum grill and mesh as approved by the department @ 3.58/kg/m2 including cost and conveyance of all materials, labour charges for making, erecting in position etc., . gaps between wall and Al frame shall be closed with white cement, where ever required complete. |
| 18 | Disposal of lime, moorum, building rubbishfrom the siteincluding conveyance of materials up to an average lead of 1KM away from the site, and correspondiong required lift, loading, unloading etc complete as directed by the EIC. (The quantity is net quantity of capacity of truck after deduction of 20% for looseness) By mechanical transport including loading, unloading and stacking. (Lead upto 1KM away from the site) |
| 19 | Disposal of excavated excess earthfrom the siteincluding conveyance of materials up to an average lead of 1KM away from the site, and correspondiong required lift, loading, unloading etc complete as directed by the EIC. (The quantity is net quantity of capacity of truck after deduction of 20% for looseness) By mechanical transport including loading, unloading and stacking. (Lead upto 1KM away from the site) |
| 20 | Supply and fixing of aluminium powder coated ventilator of size of 36\"\"X 18\"\" windows including provinding of 4 mm thick glass panes, provision of exhaust fan complete & mosquito mesh. |
| 21 | Providing & Fixing of Sanitary Fittings |
| 22 | Providing & fixing European water closet star white of Hindware make: Universal P standard closet, cat No: 20012 or equivalent make as approved by EIC. The cost includes cover, angle cock of approved by EIC, heavy duty PVC connection inlet pipe etc., closing the joints with white/ coloured cement wherever necessary as per the installation guide given in approved sanitary limited. |
| 23 | Providing and fixing Water Closet squatting pan (Cera make: Orrisa Pan (BR) , Cat no: S3020105) or equivalent make as approved by EIC (Indian type W.C. pan) with 100mm P or S trap, Single Flush low level white P.V.C. flushing cistern (Sleek Fresh(ISI)) with manually controlled device (handle lever) conforming to IS : 7231, also including 15mm inlet connection with brass unions at ends including one 15mm angle valve with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. including P trap of indian W.C shall be encased on CC (1:2:4) 6\" alround well above the joints to stop leakage at the joint etc, complete including cost of automatic PVC flush tank 5 litre capacity with flush pipe, ball cock, Angle cock, inlet & outlet arrangement and conveyance of all materials to site, cost of CC bed, labour charges and, charges etc., complete for finished item of work. |
| 24 | Providing and fixing white vitreous china urinal basin of Cera make: Civic, Cat No: 54020113 or equivalent make as approved by EIC with CP brass fittings such as speader with unions and clamps including 25mm CP concealed flush valve with isolation valve, CP brass flush bend also dome shaped waste coupling, union, nut 50mm dia PVC waste pipe clamped in walls with suitable trap leading up to the P Trap etc. including cutting and making good walls, including cost and conveyance of all materials to site,labour charges etc., complete for finished item work. |
| 25 | Providing & fixing of 12mm thick toughened glass urinal partition size (3\"X2\") fixing to the wall including brackets support complete etc. |
| 26 | Providing & fixing of Flush cock 25mm-Push type spring loaded of Hindware make, Cat No: F850020CP complete. |
| 27 | Providing and fixing of Paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete. |
| 28 | Providing & fixing of Long body tap of 20mm nominal bore dia as complete. |
| 29 | Providing and fixing of Health Faucet & Bib cock 2 in 1 tap 20mm nominal bore with plunge complete and all connected accesories. |
| 30 | Providing and fixing of soap dispenser of good quality complete. |
| 31 | Providing and fixing of CP brass soap dish tray of good quality of normal make complete. |
| 32 | Providing & fixing of C.P brass jalli of approved make. |
| 33 | Providing & fixing of C.P brass hole jalli of approved make. |
| 34 | Providing and fixing Concealled stop cock with adjustable wall flange (20mm) with all connected fittings complete. |
| 35 | Providing & fixing of 1\" PVC connections |
| 36 | Supply and fixing of CPVC 25 mm dia pipe with complete connection fittings. |
| 37 | Supply & fixing PVC out let pipe 110 mmdia pipe including all connected fittings like vent cap and clamping etc., complete |
| 38 | Providing and fixing of 1\" Ball valve with all connected fittings complete |
| 39 | Providing & fixing of short body tap of 20mm nominal bore dia as complete. |
| 40 | Providing and fixing bevelled edge mirror of size 600 mm X 450 mm of superior glass (of approved quality) complete with 6 mm thickwith C.P. brass studs button type & conveyance of all materials to site and all operational ,incidentallabour charges etc, complete for finished item of work complete. |
| 41 | Providing and fixing of PVC floor nahani traps including jointing with cement solvent complete in 75mm . |
| 42 | Providing & fixing of SS floor drainer of size 40\" X 4\" with ss trap and side hole with collar complete. |
| 43 | Supply of Labour for refixing Toilet doors. |
| 44 | (a) Skilled |
| 45 | (b) Un-Skilled |
