|
| 1 | PART B CIVIL WORKREINFORCED CEMENT CONCRETE |
| 2 | Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor fivelevel,excludingcost of centering,shuttering, finishingand reinforcement: |
| 3 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 5 | Edges of slabs and breaks in floors and walls |
| 6 | Under 20 cm wide |
| 7 | Steelreinforcement forR.C.C.workincludingstraightening,cutting, bending, placing in position and binding all complete above plinth level. |
| 8 | Thermo-Mechanically Treatedbars of gradeFe-500D or more. |
| 9 | MASONRY WORK |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : |
| 11 | cement mortar 1:4(1 cement :4 coarse sand) |
| 12 | FLOORING |
| 13 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 14 | FINISHING |
| 15 | 12 mm cement plaster of mix: |
| 16 | 1:4(1 cement: 4 fine sand) |
| 17 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approvedbrandandmanufacture,includingapplyingadditionalcoats wherever required to achieve even shade and colour. |
| 18 | Two coats |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 20 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 21 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 23 | One or more coats on old work |
| 24 | REPAIRS TO BUILDING |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 26 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 27 | Dismantling and Demolishing |
| 28 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 29 | Demolishingbrickworkmanually/bymechanicalmeansincluding stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 30 | In cement mortar |
| 31 | Dismantling stone slab cladding laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 32 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 33 | SOR Derived Items |
| 34 | Providing and fixing horizontal chajja of kota stone/ partition in Kitchen Platform 25 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : |
| 35 | Kota stone |
| 36 | Providing and fixing machine cut, mirror/ eggshell polished, Granite stone work for wall cladding, door frame/ Window Jambs including dado, skirting, risers of steps etc., in required design and pattern wherever required, atfinished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry @ 3.3 kg/sqm including pointing with epoxy grout with pigment of matching shade, including rubbing, curing, moulding and polishing of edges to give high gloss finish all complete as per directed by the Engineer-in-Charge. |
| 37 | Granite Stone of approved shade |
| 38 | PART A ELECTRICAL WORKNon-Schedule/MR |
| 39 | Sub Head-I: Design, Supplying, installation, testing & commissioning of 6 passenger (408 kg) stainless steel elevator having a contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under: -Location of Lifts: - New laboratory building block-A of CSIR-CSMCRI, Bhavnagar.(i) Speed:1 MPS.(ii) Floors: G+3.(iii) Travel: 10.5 Meters (Approx).(iv) Stops & Openings: 4.(v) Controller: A.C.variable voltage & variable frequency.(vi) Automatic Rescue Device: Complete with dry maintenance free batteries as required.(vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective/ full collective selective with/ without attendant.(viii) Powe: 415 V, 3 phase,50 Hz, 4 wires system.(ix) Type of doors. (a) Car: Power operated, centre opening horizontal/ sliding stainless steel scratch proof type. (b) Landing doors: Centre opening horizontal sliding stainless steel scratch proof type.(x) A hand rail not less than 600 mm long at 900 mm above floor level to be fixed adjacent to control panel in the lift car.(xi) voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. |
| 40 | Sub Head-II: Comprehensive maintenance of the lift which include routine,preventive & break down maintenance for preod of five years including repair/replacement of worn out items with minimum downtime and warranty & gurantee of repaired/replaced items after completion of one year gurantee period |
| 41 | 1st year |
| 42 | 2 nd year |
| 43 | 3 rd year. |
| 44 | 4 th year. |
| 45 | 5 th year. |
| 46 | Liasioning chargestowards obtaining the satutatory approvals for installation,testing, commissioning (ie. Permission to erect new elevators) and necessary safety certificate for operation (ie. Licence for working new elevators) from the competent authorities for the above 1 (one) elevator along with submitting documents which are deemed to be required, valid insurance policies and other formalitiesincluding remitting the satuatory fees as requiredon behalf of the CSIR-CSMCRI for satisfactory operation of the elevators for day to day purpose of the institute, complete in all aspects as required. |
| 47 | Credit for buy back of the old passsenger lift (408 kg) capacity including dismantling of the lift |
