|
| 1 | Preparation of Design basis, Process P&ID documents, IFC drawings |
| 2 | ITEM CODE: 1 (a)Preparation of Design basis, Process P&ID documents, IFC drawings for all terminal works required for completion of works including Process Design, CCOE document preparation for cases where no mainline shall be constructed. |
| 3 | ITEM CODE: 1 (b)Preparation of Design basis, Process P&ID documents, IFC drawings for all mainline and terminal works required for completion of works including Process Design, CCOE document preparation for cases where mainline length is from 0 to 2 KM. Maximum diameter of mainline shall be upto 12\". |
| 4 | ITEM CODE: 1 (c)Preparation of Design basis, Process P&ID documents, IFC drawings for all mainline and terminal works required for completion of works including Process Design, CCOE document preparation for cases where mainline length is above 2 KM but less than 15 KM. Maximum diameter of mainline shall be upto 12\". |
| 5 | ITEM CODE: 1 (d)Preparation of Design basis, Drawings for Control Room Building or store yard/shed/boundary wall. |
| 6 | ITEM CODE: 1 (e)HAZOP study for Pipeline Connectivity Project with terminal(s) comprising of Pressure Reduction Skid, Metering Skid, and other associated facilities in isolation or in a combination. |
| 7 | ITEM CODE: 2Preparation of item(s) specifications, PTS (Particular Technical Specs.), GTS (General Technical Specs.), MRs, estimate, BEC, draft tender, complete tendering, drawings, QAP, Technical documents for Bid, SCC, SOR etc. Approval of vendor drawing/ QAP/ Manufacturing Procedure etc.,Submission of Order closure recommendation/ Report for the following Packages: |
| 8 | ITEM CODE: 2 (i)Line Pipe (Bare/ Coating/ Coated pipes) |
| 9 | ITEM CODE: 2 (ii)BALL/PLUG Valves & Other Valves (GATE, GLOBE, CHECK, MOV’s, ROV’s Etc.) |
| 10 | ITEM CODE: 2 (iii)Metering skid / PRS |
| 11 | ITEM CODE: 2 (iv)PCV/ PSV/ FCV/ SSV/ Flow meter etc. |
| 12 | ITEM CODE: 2 (V)EIA / EMP Study |
| 13 | ITEM CODE: 2 (vi)Calibration of Flow meter / PSV testing / Supervision for commissioning of metering skid / PRS Etc. |
| 14 | ITEM CODE: 2 (vii)Gas Heaters / Insulation joints/ Scrapper launcher receiver / Flanges and fittings |
| 15 | ITEM CODE: 2 (viii)Hot Tapping Package |
| 16 | ITEM CODE: 2 (ix)Package for Composite works for pipeline laying involving Terminal, Cathodic Protection and other allied activities. |
| 17 | ITEM CODE: 2 (x)Package for composite work of New Terminal / Re-vamping of Existing Terminals |
| 18 | ITEM CODE: 2 (xi)Telecom / SCADA package # Design, engineering & tendering for procurement, installation & commissioning |
| 19 | ITEM CODE: 2 (xii)Package for Pipeline Coating, repairing, replacement work etc. in existing / running pipeline {Reimbursement towards site visit (if required) shall be paid extra}. |
| 20 | ITEM CODE: 2 (xiii)HDD Tender (Preparation of SOR, estimate, complete tendering, etc.) |
| 21 | ITEM CODE: 3Inspection of materials - line pipe, coating, other associated material like ball valves, fittings, IJ\"s, Hot tapping material, scrapper launcher, metering skids etc. at Vendor\"s shop/ at designated dump site/ construction site/ store etc. (within India) |
| 22 | ITEM CODE: 4 (a)Expert construction personnel required for specific jobs at site, for Site Construction management & Supervision (HDD, Hot tapping works etc.) |
| 23 | ITEM CODE: 4 (b)Site Construction management & Supervision of Pipeline, stations, terminals construction works, telecom/ SCADA system including inspection, commissioning assistance, store management, contract management and other site related activities. |
| 24 | ITEM CODE: 5 (a)Services of CAD operator at IGGL Project office |
| 25 | ITEM CODE: 5 (b)SAP Work at IGGL Office |
| 26 | ITEM CODE: 6Services of Regional construction Manager (RCM) |
| 27 | ITEM CODE: 7Services of Engineering Assistant for RCM & for extra works beyond the scope, not specifically covered in the scope of works in the tender. |
| 28 | ITEM CODE: 8Project Technical Co-Ordinator |
