|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified. |
| 3 | S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 4 | M & L forGlazed ceramic tiles in vertical surface 450 x 300 x 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and inlcuding 10 mm thick rendering on fair faces of concrete surface ofverticle in CM (1:4) finished even and fair without using extra cement, shade & design of tile as approved by engr in chrg compete all as specified and directed. |
| 5 | Taking up or down steel tubing and connections,20mm dia including cleaning for refixing or removal to store Complete all as specified and directed. |
| 6 | Taking up or down steel tubing and connections,15mm dia, including cleaning for refixing or removal to store Complete all as specified and directed |
| 7 | S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe of 20 mm bore of pipe including short length with all pipe fittings such as ends, elbows, union, tees, socket etc complete all as specified and directed. |
| 8 | S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe of 15 mm bore of pipe including short length with all pipe fittings such as ends, elbows, union, tees, socket etccomplete all as specified and directed. |
| 9 | S & F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed. |
| 10 | Supply and fixing in repairs vitreous Chinasquatting pan of pattern (Orrissa pattern) size 580mmx 440 mm white with integral foot rests, 110/125mm PVC(SWR) P-Traps and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 11 | S&F in repairPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 litre capacity complete all as specified and directed |
| 12 | S&Fin repair angle stop valves, cast copper alloy chromium plated fancy type ,screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed. |
| 13 | S&F in repair PVC connection 15mm size with PTMT Nut of length 450mm complete all as specified and directed. |
| 14 | S&F in repair600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 15 | S&F in repair 75 mm PVC (SWR) floor trap, plain with gratingincluding jointing with solvent cement complete all as specified and directed. |
| 16 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each complete all as specified and directed. |
| 17 | Taking down chowkats or frame with shutters ( without taking off shutter from frame )exc 1.50Sqm but n exc 4.0 sqm each complete all as specified and directed. |
| 18 | S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thickincluding cutting holes and making good dismantled portion with using PCC 1:3:6 type C-1 using 20mm graded stone aggregatefour nos for each window including following fitting welded to frame shutter: (a) Mild Steel Hold Fast 150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS Square bar 12mm welded to GI frame and 100 mm spacing of guard bar complete all as specified and directed. (Drg No. TD Drg No.LZ/C-1D 130) Note: Wire mesh and painting shall be measured and paid separately under appropriate item |
| 19 | S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm. 1.25mm thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick incl cutting holes and making good dismantled portion with using PCC 1:2:4 type B-1 using 20mm graded stone aggregate four nos for each window including following fitting welded to frame shutter:- (a) Mild Steel Hold Fast, 150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed. (HQ CELZ TD Drg No. TD Drg No.LZ/C-1D 1130)Note: Glass pan and painting shall be measured and paid separately under appropriate item. |
| 20 | All as per item above but as in ventilator fixed type (partly glazed and gauzed) complete all as specified |
| 21 | M&L for preparing previously untreated steel surfaces based materials of any description over 10cm width/ grith and applying two coats of Synthetic Enamel paint over one coat of red oxide primer complete all as specified and directed |
| 22 | S&F 3 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 23 | S&F Galvanized mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed. |
| 24 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 X 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length Complete all as speciifed and directed. |
| 25 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed |
| 26 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed |
| 27 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed |
| 28 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 29 | S&F 150 mm, long, Aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 30 | S&F 150 mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed. |
| 31 | S&F Aluminium anodised sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nutfour on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 32 | Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 33 | M&L forbrick work with sub class \"B\" bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 34 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 35 | M & L for 10 to 12 mm thickready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plaster ( as per manufacture instruction )overinterior surfaces of wallcomplete all as specified and directed. |
| 36 | M & L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plaster ( as per manufacture instruction )over exterior surfaces of wallcomplete all as specified and directed. |
| 37 | M&L for preparation of new plastered surfaces and apply one coat of alkali resistance primer on plastered surfaceson walls and applying two coats of cement based paint complete all as specified and directed |
| 38 | M&L for preparation of new plastered surfaces andapply Chalk whiting, on plastered surfaces,prepara-tory to distemperingy on walls and applying two coats of OBD complete all as specified and directed |
| 39 | M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work ceilling concrete surfaces to be finished even and fair complete all as specified and directed. |
| 40 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 41 | Supply only integral water proofing compound complete all as specified and directed |
| 42 | S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed |
| 43 | Dismantling wrought iron / Mild Steel work of any description not otherwise provided for complete all as specified and directed. |
| 44 | S & F MSjoist channel , angle or Tee section MS tubes, flats square bars etcfixed indepently or framed or without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) trusses etc any type framing including purlins and rafters etc complete all as specified and directed.(Fe 410-W Gde E-250 Quality A) |
| 45 | S&F in repair Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed |
| 46 | S & F in repair 1000 litre rotational moulded double layer polyethlene water storage tanks ISI mark engraved on tank boly (cylindrical vertical with closed threaded top) and suitable size of MS tasla with locking system hoisted andfloat valve fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 47 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 48 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection finish without using extra cement complete all as specified and directed. |
| 49 | M&L for water profing treatment to sunken slab of toilet incl demolition of exsting treatment incl remove of debris out side MoD land and cleaning the surface made free of dirt, particles followed by grinding all protrussions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion and contraction.Moistering the prepared surface for proper dispersion and penetration and applying two component cementitions elastomeric waterproofingcoating dump block 2k manufacturing by M/s Asian Paint Ltd, Pidifin 2k (dr dixit) or equlvelent in two costs @ 1.4 kg/Sqm to build 1mm thick as per manufactures specifications. The first coat shall be applied @0.7 kg Sqm and while first coat is still green the second coat shall be applied with suitable stiff brush @ 0.7 Kg Sqm. The treatment shell be carried out to entire horizontal surface and upto 450mm vertical walls. Perform aur cooling for approx 4 hrs followed by contineous water cooling at least 48 hrs.Ponding Test :- After water proofing treatmente has cured, perform a ponding test to verify its effectiveness. Block all outlets and fill the sunken area with water. The test should run for 48 hrs (or 7 days as per IS 3370 Part-I) necessary record of the test duly signed by Engr-in-Charge shall be kept on record.Inspection:- Inspect the soffit for any sign of leakage of dampness, if leaks are detected, the area must be repaired and the test repeated.Protective Screed:- Once the ponding test is sucessful, drain out the water and applya protective plaster of 20mm thick using CM 1.3 with water proofing compound to a required slope towards the spouts provided incl vertical srufaces.Back Filling:- After protective screed has dried, back fill the remaining sunken depth with light weight, non absorbent material such as pumica stone or broken bricks avoind using retaining material.Final layer:- a 50mm thick layer of PCC 1:2:4 type B1 shall be laid over light weight filling to provide the floor finish, plumbing fixture shallbe set to the required slope. |
| 50 | Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar incl cleaning sludge/wastage etc at shaft portion of bldg where new pipes to be fixedcomplete all as specified and directed. |
| 51 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls / floorsetc complete all as specified and directed. |
| 52 | S & F in repair tubular towel rail 20mm dia 60 cm long between flange, brass chromium plated including bracketcomplete all as specified and directed |
| 53 | S&F in repair Vitreous China Urinal, Half stall type, white with cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as specified and directed by Engr in Charge |
| 54 | Preparation of newly Surface of roof incl Cleaning the Surfaces by Using wire brush / pressure hose and applying high performance polyurethan liquid membrane roof coating applied cold in tow coat @ 1.5kg / Sqm /2 coat Spray /brush applied with an enlongation of 300% to 700% and tensileStrength of not less then 3N/ Sq mm as per ASTM D 412 and ASTM D 2370, crack bridging abilityof 3.5 mm as per ASTM C 1305 and Hardness of not Less then 60 as per ASTM D 2240 the Item incl epoxy primer applied @ .15kg / Sqm and a geotextileof 40GSM TO BE AppliedOver First Coat , while first coat is still wet ,Complete all as per Manufacturer instruction . |
| 55 | Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such asswitches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 56 | Taking down copper / aluminium sub main wiring and making good distrubed surfaces to match with the existing surface roof / wall / floor complete all as specified and directed. |
| 57 | Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green etc colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked)drawn through andincludingPVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunkenterminal box (Min 60mm deep, suitable size) concealed in wall, including 3mm thick bakelite plastic laminated sheet top cover for sunken boxes flush to surface for mounting of switches / socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3)complete all as specified and as directed. Note- Switch, socket & Regulator paid separately under respective items. |
| 58 | All as per item 57 abovebut for one 6 Amp socket point on an independent board with 2.5 sqmm (FRLSH) copper conductor cablecomplete all as specified and directed. |
| 59 | All as per item 57 abovebut for one 6 Amp socket point on same board complete all as specified and directed. |
| 60 | All as per item 57 abovebut for one 16 Amp socket point on independent with 4.0 sqmm FRLSH unsheathed copper conductor single core multistrandedcomplete all as specified and directed. |
| 61 | S&F Switch piano flush type 5 Amp single pole on way |
| 62 | S&F socket outlet 2 in 1, 3 pin 6A complete |
| 63 | S&F switch socket combination 2 in 1 flush type 16 Amp 5 Pin |
| 64 | S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed. |
| 65 | M&L for sub main wiring with two single core 6 Sqmm (FRLSH) copper conductor PVC insulated and unsheathed cableincluding PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm (FRLSH) insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm (FRLSH) copper conductor shall be measured as one unit length.) |
| 66 | S&F in replacement of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified and directed. |
| 67 | S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and diected. |
| 68 | S&F of MCB SPN 40 to 63 Amp 240 volt \"C\"curve 10 KA complete all as specifed and directed. |
| 69 | S&F of MCB SP 6 to 32 Amp 240 Volt \"C\" curve 10 KA complete all as specified and directed. |
| 70 | Supply and fixing motion sensing LED lights fitting 4 Ft, 20W, 220V, AC, energy efficient intelligent sensor power batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 71 | Supply and fixing LED lights fitting 4 Ft, 20W, 220V, AC, batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed. |
