|
| 1 | Replacing the existing wood work by supplying, manufacturing and fixing of Teak woodframes and architraves for doors, windows, ventilators, etc., made out of best quality teak wood scantlings with necessary holdfast/anchor fasters, wooden plugs and screws for fixing it to the various openings including removing the old door frame / shutter with all fittings, refixing the shutter to the new frame, finishing the sides with plastering white/colour washing to match with existing surface, painting the new wood with two coats of synthetic enamel paint over a coat of primer etc., and returning the retrieved old materials to GSO civil maintenance stores, etc., all complete as per the specifications and as directed by Engineer-in-charge. |
| 2 | Supplying and fixing 35mm thick solid teakwood panelled door shutters of single leaf/double leaves and shutter frame shall be made out of 125 x 35mm, bottom rail of size 250 x 35mm and lock rail of size 200 x 35mm with tongue and groove jointed panels with minimum 125mm width of equal panels of 25mm thick each and 5 x 3mm groove at front face using second class teakwood including making as per drawings for various structural openings, labour for fixing of furniture fittings, removing the old damaged door and returning them to GSO stores etc., allcomplete as per specifications and as directed by Engineer-in-charge. |
| 3 | Replacing the old night latch by supplying and fixing in position of Ultra XL+ Vertiboltof \"Godrej\" / (1CK -Texture Brown) or approved equivalent make operable by key from outside and by knob from inside with four keys including removing the old night latch and returning the damaged night latch to GSO stores, fixing the new vertibolt using retrofit adopter over the existing night latch hole, etc., all complete as directed by Engineer-in-charge.(Note: The lock shall be got approved by the Engineer before making bulk order) |
| 4 | Supplying and fixing of following spares for Ultra verti bolt (Godrej - 1CK - Texture Brown) including servicing the lock, replacing the damaged part, etc., all complete as directed by Engineer - In - Charge. |
| 5 | Knob Spring |
| 6 | Follower Spring |
| 7 | FollowerSlider |
| 8 | Knob assembly |
| 9 | PIN Cylinder assembly |
| 10 | Reconditioning the existing teakwood panelled door shutters by replacing the damaged bottom rails with Class-II teakwood planks of upto 150mm - 200mm wide 35mm thick and providing with (22 gauge) aluminium plain sheet at bottom on both sides to a height of 400mm including cost of teakwood, aluminium sheet, nails, screws and painting the same, etc., complete including removing the old damaged door shutters and returning to GSO maintenance stores etc., all complete and as directed by the Engineer-in-charge. |
| 11 | Supplying and fixing glazed shutters having 65 x 32mm second class teakwood frames and 4mm thick clear/grounded glass for windows / ventilators including providing and fixing 19x12mm size teakwood beading for fixing glass, fixing shutter, removing the damaged window shutters, returning them to maintenance stores all as per specifications and as directed by the Engineer-in-charge. |
| 12 | Replacing the existing damaged window / ventilator glass panes by supplying and fixing in position 4mm thick plain/grounded glass of make Saint Gobain or equivalent with necessary teakwood beading, pin nails, putty, etc., by using the existing removed beading to the possible extent and supplying and fixing balance beading if any, including cost of beading, nails, putty, etc., and transporting the removed broken glass pieces and disposing safely at places as shown etc., all complete as per specifications and as directed by the Engineer-in-charge. |
| 13 | Window glass panes size upto 900 x 500mm |
| 14 | Window glass panes size upto 1200 x 500mm |
| 15 | Ventilator glass panes grounded of sizes 565 x 565mm / 535 x 600mm / 495 x 545mm |
| 16 | Louver glass of size 600 to 750mm long, 125mm wide grounded glass. |
| 17 | Supplying, fitting, fixing in position of 6mm thickness plain/grounded glass of \"Saint Gobain\" or approved equivalent make for doors, partition, windows, fixed glazing, louvers, etc., including fixing withputty,TW beading, neoprene gasket, etc., all complete as per drawing and specifications. |
| 18 | Providing and fixing Wardrobe shutters of single/double leaves made out of 8mm thick Cement bonded particle board of `Bison Panel\" or approved equivalent make panels with second class teak wood frame of size 40x40 mm alround with lock rail of size 40x32 mm at the centre for each leaf including removing the old damaged shutter and returning the damaged shutter to GSO stores etc., complete all as per specifications and as directed by the Engineer-in-charge. |
| 19 | Repairing the cupboard shutters by removing the shutters from the existing position with all furniture fittings, removing the damaged portion of plywood panels from the shutters and replacing with 4mm thick commercial plywood including cost of cutting, finishing the edges and refixing the shutters in position with all the existing fittings and painting with two coats over one coat of synthetic enamel paint of wood primer etc., complete all as per specifications and as directed by the Engineer-in-charge. |
| 20 | Providing and fixing IS : 12817 marked stainless steel butt hinges (Heavy weight) of make GARG or approved equivalent make including fixing with suitable stainless steel screws, etc., complete. |
| 21 | 125 x 65 x 2.50mm |
| 22 | 75 x 47 x 2.50mm |
| 23 | Replacing the old / damaged stainless steel butt hinges by supply and fixing IS : 12817 marked stainless steel butt Hinges (Heavy weight) of make GARG or approved equivalent make including fixing with suitable stainless steel screws and returning the retrived old materials to GSO Civil Maintenance stores etc., all complete. |
| 24 | 125 x 65 x 2.50mm |
| 25 | 75 x 47 x 2.50mm |
| 26 | Providing and fixing Stainless Steel Piano hinges (Heavy weight) of overall width of 50mm and 20G thickness of make GARG or other approved equivalent make for Aluminium wardrobe shutters including fixing with suitable counter sunk stainless steel screws,etc., complete as directed by Engineer-In-Charge. |
| 27 | Replacing the old / damaged aluminium handles by Supplying and fixing IS:208 marked aluminium handles of \"Classic or Crown\" or approved equivalent make including anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, fixing with necessary SS screws and returning the retrived old materials to GSO Civil Maintenance stores etc., all complete as per specification. |
| 28 | 125mm x 12mm dia. |
| 29 | 100mm x 10mm dia. |
| 30 | Providing and fixing IS:208 marked aluminium handles of \"Classic or Crown or Global\" or approved equivalent make including anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, fixing with necessary SS screws etc., all complete as per specification. |
| 31 | 125mm x 12mm dia. |
| 32 | 100mm x 10mm dia. |
| 33 | Providing and fixing IS:204 marked Aluminium tower bolts ofmake \"Classic or Crown\" or approved equivalent make including anodised transparent or dyed to required colour or shade, fixing with necessary CP screws, etc., all complete as per specification. |
| 34 | 250 x 12mm |
| 35 | 100 x 10mm |
| 36 | 75 x 10mm/baby latch |
| 37 | Replacing the old / damaged Aluminium Tower bolts / baby latch by Supplying and fixing tower bolts / baby latch ofmake Classic or Crown or Hanoi or Ashokaincluding anodised transparent or dyed to required colour or shade, fixing with necessary CP screws and returning the retrived old materials to GSO Civil Maintenance stores etc., all complete as per specification. |
| 38 | 250 x 12mm |
| 39 | 100 x 10mm |
| 40 | 75 x 10mm/baby latch |
| 41 | Providing and fixing ISI marked Aluminium sliding door bolts (Aldrops) of \"Classic or Crown or Global \" or approved equivalent make as per IS 2681 including anodised transparent or dyed to required colour or shade, fixing with 5 Nos of clip and staple with necessary CP screws etc., all complete as per specification. |
| 42 | 250 x 16 mm |
| 43 | Replacing the old / damaged Aluminium sliding door boltsby Supplying and fixing ISI marked Aluminium sliding door bolts (Aldrops) of size 250 x 16 mm of make \"Classic or Crown\" or approved equivalent make as per IS 2681 including anodised transparent or dyed to required colour or shade, fixing with 5 Nos of clip and staple with necessary CP screws and returning the retrived old materials to GSO Civil Maintenance stores etc.,all complete as per specification. |
| 44 | Providing and fixing 200mm long SS Gate hook and eye of make Garg including fixing as directed by Engineer-in-charge. |
| 45 | Providing and fixing 75mm long anodised Aluminium hook and eye including fixing with suitable screws etc., allas directed by Engineer-in-charge. |
| 46 | Providing and fixing 90x40mm anodised Aluminium hasp & staples of approved make including fixing with suitable screws etc.,all complete as per specification and as directed by Engineer-in-charge. |
| 47 | Providing and fixing 300mm long plate fixed with three / four prong type anodised aluminium robe hooks of approved make with suitable screws. |
| 48 | Providing and fixing Door Safety chain of approved shape with SS304 grade chain and satin nickel polished of make Godrej or Prayag or otherapproved make including fixing as directed by Engineer-In-Charge. |
| 49 | Providing and fixing Anodised aluminium hanging type door rubber stoppers of required colour or shade including fixing with necessary screws etc., all complete as per specifications. |
| 50 | Twin rubber stopper |
| 51 | Providing and fixing double action hydraulic floor spring of \"HARDWYN\" or \"GODREJ\" or approved equivalent make with ISI mark, pivoting and all other arrangements including cost of cutting floor, SS cover plates with brass pivots & other necessary accessories required for the work to facilitate smooth operation of the door shutter etc., all complete as directed by the Engineer-in-charge. |
| 52 | Replacing the old/damageduniversal Hydraulic door closer bearing ISI mark of EVERITE/GODREJ or approved equivalent make as per IS:3564 (Type-B No.2) including removing the old door closer and returning the damaged door closer to GSO stores etc.,all complete as directed by the Engineer-in-charge. (Note:- The Hydraulic door closer shall be got approved by the Engineer-in-charge). |
| 53 | Fixing the old retrievedhydraulic door closer including removing the damaged door closer, depositing at store,fixing the old retrieved door closer with necessary screws, if any required etc., all complete as directed by Engineer - In - Charge. (Note:- Old retrieved door closer will be supplied by department at free of cost.) |
| 54 | Repairing/servicing the old hydraulic door closer including repairing, servicing,filling oil replacing the damaged screws/rivets if any etc., all complete as directed by Engineer - In - Charge. (Note:- Old retrieved door closer will be supplied by department at free of cost.) |
| 55 | Supplying, fabricating bending and fixing the position of AISI 304 grade stainless steel section for hand railing/hanger rodsmade of Hollow tubes, channels, plates, etc., of required size including butt / mitre welding,grinding, buffing, polishing, making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement, drilling holes in floor/walls embedding/ grouting with suitable grouting materials, etc., all complete as per drawing and specification and as directed by EIC. Note:- 1. The stainless steel tubular pipe/ section shall conform to ASTM A554/A312. 2. All welding joint shall conform to V groove joint and joint shall be ground finish. 3. There shall not be any spatter or imperfection on the pipe and the pipe surface shall be ground and smooth. 4. External surface of SS pipe shall be buffed to mirror finish.5. The rate shall be inclusive of providing ball joiners, flush joiners, base plate/flanges, cover plate, end caps epoxy glue, round face/square face glass connecters for fixing etched colour glass if any of required size with gaskets including curved railings where ever required cost of screws, weld etc., 6. The entire pattern of stainless steel hand railing work/pattern including fixing of etched glass, if any in the hand rail shall be got approval by EIC/Architect before execution. 7. Only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc., for payment purpose. |
| 56 | Repairing the wooden partitions, furniture\"s, counter tops by removing the damaged portions of plywood, lamination, etc., and replacing with the suitable materials of approved quality including cutting to required sizes, fixing, finishing to match with the existing one, fixing of all furniture fittings, etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 57 | Using 12mm thick commercial plywood |
| 58 | Using 18mm thick commercial plywood |
| 59 | Finishing with 1mm thick lamination |
| 60 | Labour charges for removing and refixing name board / Sign Boardwith necessary cost of screws, riverts if any required etc., all complete as directed by Engineer-in-Charge. |
| 61 | Repairing the wooden cots by repairing the damaged portions by nailing, strengtheningthe joints using adhesive of Fevicol including cost of nails, adhesives etc., all as directed by the Engineer-in-Charge. (Note:- Cost of new wood if any required will be paid under relevant item (or) retrieved old wood will be supplied at free of cost) |
| 62 | Repairing the tables and chairs by repairing the damaged portions by nailing, strengtheningthe joints using adhesive of Fevicol including cost of nails, adhesives etc., all as directed by the Engineer-in-Charge. (Note:- Cost of new wood if any required will be paid under relevant item (or) retrieved old wood will be supplied at free of cost) |
| 63 | Repairing the existing wire netted chairs by replacing the damaged or loose wire base including identifying the damaged/loose netted portion, cutting/ removing the damaged portion or completely removing the wire net, netting the area with new wires, trim any excess wire and ensure all connections fixed/tied properly, tuck in any sharp ends to avoid injury and check the stability of the chair, making adjustments as necessary etc., all complete as directed by the Engineer-in-Charge. |
| 64 | Providing and fixing in position of 5mm thick looking mirror of make \"SAINT COBAIN\" or approved equivalent make of an overall size of 600 x 450mm with fibre reinforced plastic frame with gasket and 6mm thick BWR ply with painting, screw slots two number each on horizontal and vertical sides and fixing to the wall with necessary screws and including returning the old damaged mirrors to GSO Civil Maintenance stores, etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 65 | Repairing and refixing the existing looking mirror with fiber reinforced plastic frame including replacing the worn out rubber gasket with new gasket, replacing the damaged PVC/MDF backing with 6mm thick BWR plywood with wall fixing screw slots two nos each on vertical and horizontal side, painting with one coat of synthetic enamel paint to match with the existing surface fixing it to the wall with necessary screws, etc., all complete as per specification and as directed by the Engineer-in-charge. [Note: The required Looking mirror and frame will be issued by the Department at free of cost.] |
| 66 | Providing and fixing heavy quality 600mm CP Towel railofapproved make with wall flange including fixing with suitable CP screws, returning the retrieved wornout fittings to GSO Civil maintenance stores, etc., all complete as per specification and as directed by Engineer-In-Charge. |
| 67 | Painting for wood work with two coats of synthetic enamel paint of approved colour and make over a coat of primer over new wood work suitably prepared for receiving the primer and paint by scraping, rubbing, applying wood filler, wood putty, making surface smooth, etc., as per specifications. |
| 68 | Providing and fixing Marble / Granite work gang saw cut mirror polished, (pre moulded and prepolished slab) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laidover 20mm thick base cement mortar 1 : 4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups, etc., including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, providing grooves wherever required, etc., all complete at all levels as per specifications.(Note: The marble/Granite stones slab shall be got approved by the Engineer before making bulk order.) |
| 69 | Granite - Ruby red/Jet Black (16 - 18mm thick) |
| 70 | Supplying and fixing 20mm to 25mm thick both side polished cuddapah stone slabs for Shelves in Cupboard/Wardrobe/Shoe rack, etc., including fixing by cutting a chase of appropriate width with cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specifications and as directed by Engineer-in-charge.(Note: Cudappah stones shall be got approved by the Engineer before making bulk order) |
| 71 | Providing and fixing 14-16mm thick White Agaria Marble Stone slab table rubbed, exposed edges rounded and polished of required size and fixed in urinal partitions, shelves above wash basin, etc., by cutting a chase of appropriate width with chase cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specification and as directed by Engineer-in-charge. |
| 72 | Providing and fixing Dual Reflective Sun Control Film of Garware or approved equivalent make over the existing windows including cleaning the glass, pasting the films over glass without void / air gaps using approved adhesive, cleaning, etc., all complete as per manufacturer specification and as directed by Engineer-In-Charge. |
| 73 | Supplying, fabricating and fixing of MS grills and gates made out of angles / flats as per drawing with counter sunk holes for screws and holdfast and locking arrangements for gates and painting with one coat of red oxide zinc chromate primer and two coats of anti corrosive paint including fixing it to the existing wooden frames complete, removing the old damaged grills and gates from existing position, returning them to maintenance stores, etc., all complete as per specifications and as directed by the Engineer-in-charge. |
| 74 | Fabrication and fixing of doors, windows, ventilator frames, window shutters, ventilator shutters using the available old wood by cutting to required length, jointing, fabricating to required size and fixing with necessary hold fasts including removing the old painting, removing the damaged wood works, finishing the wall surfaces, white washing, applying two coats of synthetic enamel paint over a coat of wood primer, etc., complete all as directed by Engineer-in-charge. |
| 75 | Window frames |
| 76 | Ventilator frames |
| 77 | Window shutters |
| 78 | Ventilator shutters |
| 79 | Repairing, modifying the following size of panelled door shutters using old wood/retrived panelled doors and fixing including removing the damaged styles, rails, panels if any and fabricating with available old wood to required size and shape, removing the old painting, fixing in position with all required furniture fittings, painting two coats synthetic enamel paint over a coat of primer etc., all as per specification and as directed by Engineer-in-charge. |
| 80 | Upto 650mm wide and 2100mm height |
| 81 | Above 650mm wide and 2100mm height |
| 82 | Repairing, modifying the following size of door frame using old wood/retrived door frames and fixing including removing the damaged existing door frame, fabricating the frame with available old wood to required size and shape, fixing in position with holdfast if required, painting one coat synthetic enamel paint over a coat of primer etc., all as per specification and as directed by Engineer-in-charge. |
| 83 | Jointing door frame Vertical for 300 to 750mm length |
| 84 | Jointing / Replacing door frame Horizontal 650 to 1000mm length |
| 85 | Providing and fixing Aluminium curtain rod of 25mm aluminium hollow tube with 2mm wall thickness including providing end brackets, fixing over window/openings, etc., all complete as per specification and as directed by the Engineer-in-charge. |
| 86 | Fabrication and fixing of 18 mm thick, 150 mm wide pelmet using the available old wood by cutting to required length,jointing, fabricating to required size including fixing in wall with 18mm thick teakwood brackets with suitable screws/ rawl plug, providing 20mm dia heavy duty quality anodized aluminium curtain rod of polishing the all exposed surface with three coats of natural polishing with French/Touch wood polish, etc., all complete as per specification and as directed by Engineer. [Note: Aluminium curtain rod will be paid separately under relevant item.] |
| 87 | Attending complaints on minor repair works in doors, windows, ventilators of various types by servicing the fittings and replacing the wornout fittings if any, refixing the same, and also other carpentry related complaints if any etc., complete all as directed by the Engineer-In-charge.[Note: Cost of fittings will be paid for separately under relevant item] |
| 88 | Ventilator shutters |
| 89 | Window shutters |
| 90 | Door shutters |
| 91 | Door frame with PVC Shutter |
| 92 | Supplying and fixing in position single leaf/double leaves of following thick non decorative type factory made Wood Polymer Composite (WPC) solid door shutters of approved makehaving density of 600 - 800 Kg/Cum, water absorption less than 1% and tensile strength greater than 12 MPa including providing aluminium lipping / Teak wood all-round if required, fixing the lipping with suitable adhesive, fixing required hardware fittings, fixing door using required screws, etc., all complete as per specifications and as directed by Engineer-In-Charge.[Note: Cost of Door frame, hardware fittings and Aluminium / Teak wood lipping will be paid for separately under relevant item.] |
| 93 | 30mm thick Solid WPC Shutter. |
| 94 | 35mm thick Solid WPC Shutter. |
| 95 | Supplying and fixing in postion single leaf Factory made flush door shutterof 25 mm thick PVC integral foam sheet of make M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour for flush door shutter including providing recessions for hinges, fixing with following fittings over the granite door frame using required fasteners, finishing all edges with mixture of PVC powder & solvent for smooth finish, etc., all complete as per specification and as directed by the Engineer-In-Charge. The door shutter shall be fixed with the following hardware fittings: - a)4 Nos. of 75 mm long stainless steel butt hinges ofGARGbrand bearing ISI mark with suitable stainless steel screws. b) Two numbers of 125mm long anodised aluminium Dhandle of make Classic/Crown or approved equivalent as per IS - 208 bearing ISI mark with suitable CP screws.Note: - 1) All furniture fittings shall be of approved quality and make. 2) The rate quoted shall be inclusive of fixing of door shutters with required hardware fittings as detailed above. 3)The PVC Integral Foam shall be factory manufactured solid section of light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides. The sheet shall have density of 500 - 600 Kg/Cum, water absorption less than 1% and tensile strength greater than 11 MPa. 4) The entire door shall be jointless shutter. 5) The sizes shall be approximately 700 mm x 2100mm, however exact dimensions shall be measured at site before manufacturing.c) Two numbers of 75mm long anodised aluminium baby latch type/cranked type tower bolt with suitable CP screws. d) One number of 50mm long solid PVC door buffer with 75mm long CP screws. |
| 96 | Providing and fixing of Fly proof Stainless Steel (Grade 304) wire gauze of 0.4mm dia wire and 1.4mm aperture on both sides of approved quality and make over Partly panelled Door / Grill door including fixing with second class Teak wood beading or Aluminium frame work, cost of screws, nails, rawl plug, etc., all complete as per specification.[Note: Cost of frame work i.e., Teak wood or aluminium or MS will be paid separately under relevant item] |
| 97 | Providing and fixing in position aluminium partitions, doors, windows, ventilators, louvers,fixed glazing, sliding windows north light glazing, sliding shutter \"E\" Channel etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of \"JINDAL\" or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge. Note:- 1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc.,2. Glazing, particle boards, aluminium grills, mesh etc., will be paid separately under relevant items. 3. All fittings except under Note-1 will be paid seperately under relevant item and the fittings shall be of matching colour anodized aluminium sections.4. The aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cleat angles at no extra cost. 5. The aluminium section shall be anodized with \"MATT FINISH\" (15 micron thick) finishing and of approved shade/colour with the approval of Engineer-In-Charge. |
| 98 | Re-fixing of aluminium partition, fixed glazing etc., including dismembering the partition by removing the glazing, particle boards gasket, jointing clamps etc., shifting transporting if any required, refixing the partition using required cleat, screws, anchor fastner etc., fixing the glazing/particle board,providing EPDM/neoprene gasket lining, stainless steel screw, mastic filling, weather strips, etc., all complete as directed by Engineer-in-charge.Note:- 1) Payment shall be made on the basis of Elevation area of aluminium members/section fabricated and actually installed in position withoutextra allowance for wastage no extra payment shall be made for non aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc., 2) All fittings except under Note-1 will be paid seperately under relevant item and the fittings shall be matching colour anodized aluminium sections. |
| 99 | Providing and fixing in position of 10mm thick Cement bonded pre-laminated particle board of `Bison Lams\" or approved equivalent make panels prelaminated with decorative lamination on both sides for door shutters, partitions, cupboard shutters, sliding shutters, etc., including cutting to required shape and size, making as per drawing with Anodized aluminium frame alround with lock rails at the centre for each leaf, fixing in structural opening, providing teakwood lipping alround for sliding shutters, etc., all as per specification and as directed by the Engineer-In-Charge. (Note:- Aluminium frame work will be paid for seperately under relevant item.) |
| 100 | Repairing, re-aligning and making good of aluminium doors, windows by removing making all modification and refixing in its original position including servicing and replacing gaskets, cleats, pins etc., wherever necessary etc., all as directed. (Note: The Rate quoted shall be for each shutter) |
| 101 | Aluminum Doors |
| 102 | Aluminum Windows |
| 103 | Repairing of break down rolling shutters as and when required including providing scaffolding, removal of shutters, hoods, checking and repairing, etc., refixing the shutters in original position and making the shutters in good working condition all as directed. |
| 104 | Repairing the leakages in AC sheet roof by removing the damaged J-bolts washers, nuts etc., providing and fixing new J-bolts with nuts, bitumen and metal washer, tightening with nuts etc., all complete as per specifications and as directed by the Engineer-in-charge. |
| 105 | Providing and fixing 2mm thick vinyl flooring of Polyfloor/LG/ Armstorng or approved equivalent make for flooring and skirting including preparing the surface as per manufactures instruction, fixing with synthetic resin of fevicol SR 998 or approved equivalent make, finishing the surface etc., all as per manufactures instruction and as directed by Engineer - in - charge.Note: 1) The vinyl flooring materials shall be got approved by the Engineer - in - charge before making bulk order.2) The work shall be executed with skilled manpower as per manufacturers specification. |
| 106 | Providing and fixing Vertical blinds of Vista Levelor or Marvel approved equivalent make with vanes of 100mm width made of non woven polyster fabric which are suspended from the stilt travellers by self aligning vanes hooly of effective optimized system, vanes shall be coupled together by means of bead chain pivotaly attached by closing to each side of each weight including the cost of blinds, fixing in slim aluminium head railing, runners, spacers, control units, other incidental charges, etc., all complete as per specification and as directed by Engineer. [Note:- Sample shall be got approved by the Engineer before making bulk order.] |
| 107 | Servicing the vanetion blinds/vertical blinds including removing the complete set of blinds, removing the damaged clip suspended from stilt traveller, fixing the vanes with new clip, checking the bead chains and its movement, servicing for smooth operation of blinds etc., all complete as directed by the Engineer-in-Charge. (Note:- Rate shall be quoted for complete set of vanetion blind/ vertical blinds for one window) |
| 108 | Providing and fixing cold rolled colour coated Galvalume steel profile sheets for roofing and cladding using sheet of 0.47mm base thickness 550Mpa yield stress (ASTM A792m) with coating class AZM 150 (minimum 150 gram/sq.m total mass zinc aluminium coatingof both sides as per relevant standards) of make JSW / Bhushan / TATAto suit a purlins spacing of 1.5 mts c/c including the cost of providing ridge gutter edge profiles, cost of making crimps for curved surface, fixing over purlins, makingetc., all complete as per drawings and specifications.Note:- 1) The sample of Galvalume steel sheet shall be got approved by the Engineer-in- charge before making bulk order.2) The sheet shall be fixed using self driling/self tapping screws of size (5.5 mm X 55mm) with EPDM seal or with polymer coated J or L hooks, Bolts and nuts 8mm dia with Bitumen andG.I limpet washers or with G.I limpet washer filled with white lead complete up to any pitch in Horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 109 | Providing and fixing double scaffolding system (cup lock type) on the exterior side at all height made with 40mm diameter M.S. tube spaced @ 1.5m center to center at both horizontal and vertical tubes, joining with cup and lock system with M.S.tube, M.S.tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners connection with the building, etc., Wherever required for the inspection of work at required location with essential safety features for the workmen, etc., complete as per directions and approval of Engineer-in-charge. (Note: The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.) |
| 110 | Supplying and fixing of concealed sliding window latch for aluminium sliding window, ventilators of various sizes of make EBCO or other approved equivalent make including replacing the damaged fittings, etc., as directed by Engineer-In-Charge. |
| 111 | Providing and fixing M10 expansion anchor fasteners of make Hilti or other approved make in RCC/ brick masonry at all lifts including drilling hole using hammer drilling or diamond core drilling, cleaning the hole using hand pump for blowing out dust, setting the anchor in position, checking the anchor setting, fixing the steel members with approved thickness of washer and nut, checking the installation, etc., complete all as per manufacturer specifications andas directed by the Engineer-in-charge. |
| 112 | M10 x 153 stud anchor with effective anchorage depth of 80mm of make Hilti [HSA-R-(SS)] or other approved make for RCC members. |
| 113 | Fabrication of wooden stool of approved size using available old retrieved wood as detailed below including collecting the old wood from store, cutting to required size and shape, plaining the surface, jointing the leg and bracing by suitable jointing method using adhesive and nailing, painting the exposed surface with two coats of synthetic enamel paint over a coat of primer etc.,all complete as perdirected by the Engineer-in-Charge.Note:- 1) 4 legs of 50x50mm scantling shall be used connected with alround bracing of size 50x25mm at top and bottom. 2) Seating shall be fixed with 25mm thick planks. 3) Old retrieved wood will be supplied by department at free of cost. |
| 114 | Fabrication of wooden foot rest with two side supports of approved size and shape using available old retrieved wood etc., all complete as directed by the Engineer-in-Charge.(Note : Old retrieved wood will be supplied by department at free of cost.) |
| 115 | Fixing of old available flush door / panelled door shutters of various sizes including removing the damaged door shutters, transportation of retrieved shutter from GSO stores, fixing in position with all required furniture fittings etc., all complete as per specification and as directed by the Engineer-in-Charge. Note:- 1. Retrieved Door shutters will be issued free of cost by the department. 2. Furniture fittings shall be paid separately under relevant item. |
| 116 | Supplying and fixing of following furniture fittings of make \"EBCO / Godrej\" or other approved make including removing the damaged fittings, fixing the new fittings with required screws, etc., all complete as directed by Engineer-In-Charge. |
| 117 | Telescopic drawer channel (Ball bearing) -300mm |
| 118 | Telescopic drawer channel (Ball bearing) - 550mm |
| 119 | Multipurpose furniture lock with duplicate keys |
| 120 | Drawer cupboard lock (75mm) with duplicate keys |
| 121 | Providing and fixing Stainless steel (SS 304 grade) adjustable friction window stays of following sizes of \"EBCO\" or approved equivalent make for aluminium windows including fixing with necessary SS screws as per specification and as directed by the Engineer-in-charge. |
| 122 | 305mm long for aluminium windows, Ventilators |
| 123 | Polishing the wooden areas at all lifts with two coats of Wax polish/Touch wood of approved make including preparation of surfaces by scrapping with suitable tools or with suitable grade of sand paper, cleaning the surface dust free for applying the polish, disposing the scrapped debris, applying sealer, suitable filler materials wherever required, cost of all materials, labour etc., all complete as per specification. |
| 124 | Replacing the existing damaged false ceiling tiles with a lay-in perforated metal ceiling system from Armstrong or an approved equivalent, using 600x600 mm lay-in tiles made of pre-coated galvanized steel with a thickness of 0.5 mm in an approved color with standard perforations of 2.5 mm in diameter and an open area of 16%, with Soundtex acoustical fleece glued to the back including removing the existing damaged tiles, fixing the new metal ceiling tiles over the existing grid system, providing suitable openings for mounting lighting fixtures and fittings, loudspeakers, fire alarm system components, and lighting systems, as well as provisions for trap doors wherever required, air conditioning ducts, etc., all complete as per manufacturer specifications and as directed by the Engineer-in-Charge. |
| 125 | Supplying and fixing of Green Chalk Writing Board of approved size of make Schoolneeds or Corporate Concepts or Alkosign made from high quality hard dry wipe Green chalk laminate over 10mm thick MDF board framed with 25mm thick double sided curved heavy anodized aluminium sections and Chromium plated plastic corners including backed with PVC sheet, providing concealed clamps at the back side for wall mounting, providing and fixing of chalk tray atbottom side, etc., complete. |
| 126 | Supplying and fixing of Notice board open type of approved size of make School needs or Corporate Concepts or Alkosign made from high quality 10mm thick soft board covered with colour (Blue / Maroon) blazer cloth and framed with 25mm thick double sided curved heavy anodized aluminium sections and Chromium plated plastic corners including backed with PVC sheet, providing concealed clamps at the back side for wall mounting, etc., complete. |
| 127 | Providing and fixing Sliding glass door Notice board of approved size of make Schoolneeds or Corporate Concepts or Alkosign made up of anodized aluminium frame work along with 5mm thick clear float glass of “SAINT COBAIN” or approved equivalent make for sliding door including providing sliding arrangement, star locks, 12mm thick soft board covered with colour (blue / maroon) blazer / flannel cloth backed with PVC sheet, providing clamps at the back side for wall mounting, etc., all complete as directed by Engineer-in-charge. |
| 128 | Dismantling Asbetos sheets roofing including ridges, hips, valleys and gutters etc., and stacking the retrieved/broken sheets stock within 1Km lead etc., all as directed by Engineer - In - charge. |
