|
| 1 | M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilastersetc by brooming down or steel wire brushing,scrapingdown smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy complete all as specified and directed |
| 2 | All as per item No 1 above but one coat of white wash on ceilings. |
| 3 | All as per item No 1 above but one coat of oil bound distemperon walls. |
| 4 | All as per item No 1 above but one coat of cement based paint on walls. |
| 5 | All as per item No 1 above but two mm thick of wall care putty on wall. |
| 6 | M&L for preparation of old painted steel surface of any description in any position and location not otherwise described over 10 cms width or girth andapplying one coat of synthetic enamel paint complete all as specified and as directed |
| 7 | All as per item No 6 above but applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed. |
| 8 | M &L Complete removal of existing treatment ofold plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primerto wall surface complete all as specified and directed. |
| 9 | M&L forComplete removal of existing treatment ofold plastered surfaces on walls and applying two coats of interiorplastic Emulsion andover and incl 1.0 mm average thickcoat of wall care putty all as specifed. |
| 10 | Complete removal of existing treatment andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 11 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed. |
| 12 | Taking down chowkats or frame with shutters(without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed. |
| 13 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed |
| 14 | S&F 2nd hard wood35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitredand rebated any numbers andsize of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed. |
| 15 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 16 | S&F mild steel angle iron work as in doors or gates or grill of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165) complete all as specified and directed |
| 17 | S&F Mildsteel butt hinges medium weight 100mm long complete all as specified and directed. |
| 18 | S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed |
| 19 | M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. |
| 20 | S&F Aluminium anodised barrel tower bolt of extruded section 150 mm sizecomplete all as specified and directed. |
| 21 | S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed. |
| 22 | S&F solid PVC door, cup boardframe size 50mmx47mm made out of 5mm prelaminated PVC sheetreinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed |
| 23 | S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed. |
| 24 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified and directed |
| 25 | S&F factory made solid PVC door, cup board shutter30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC \"C\" channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & b PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 27 | S & F in repairs Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane (Thickness in 3.00mm) complete all as specified and directed |
| 28 | S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed. |
| 29 | S & FM&L for Powder coatedaluminium ventilator having frame of Section 57x52 ,Series -B 20535 andshutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.).complete all as specifiedcomplete all as specified and as directed. |
| 30 | S&F Aluminiumpowder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring orhinges 100mm size with hydrolic door closer, handles \"D\" type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified |
| 31 | M&L Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified and directed |
| 32 | S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , completeall as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handleetc complete all as specified and directed. |
| 33 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed |
| 34 | Demolition of floor hearth or wall tilling incl cement mortar bedding but not backing) removing serviceable tiles and rubbish off the premises. |
| 35 | M & L for non skid ceramic (colored), IS:15622 of approved make & ISI marked7 to 8 mm thick as in floor area of each tile0.06 sqm but not exceeding 0.11 sqm , set and jointed in neat cement slurry and pointed in white or colored cement to matchincl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.complete all as specified and directed |
| 36 | M&L for light shadeVitrifiedtiles in IS:15622 of approved make& ISI markedvertical surface of size 300x450x 7 to 8 mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match for surface of tiles, over 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed. |
| 37 | All as above item 36.00 but as in skirting including 10mm thick backing coat of tiles in CM(1:4) complete all as specified. |
| 38 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. |
| 39 | M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step or shelvesetc incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing. |
| 40 | M&L machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendringin CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing. |
| 41 | M&L Granite slab work 18-20mm thick in floors steps, cooking platforms and likeincluding pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge. (Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate) |
| 42 | M&LMarble work 18 to 20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types -Green Marble |
| 43 | M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling. |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed. |
| 45 | M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed. |
| 46 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed |
| 47 | Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified. |
| 48 | Demolition ofBrick work or stone/boulder masonry, build in cementmortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 49 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed |
| 50 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed. |
| 51 | M&L for rendering 15mmthick on any faces of brick work in CM1:6, finished even and fair complete all specified and directed. |
| 52 | M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemperand a coat of primer all as specifed. |
| 53 | M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in, levelling coarse complete all as speificed and directed |
| 54 | S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I incl 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed by Engineer in Charge |
| 55 | S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I incl 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed by Engineer in Charge |
| 56 | S&F for 25 mm SS curtain rod withfixing bracket and knobs fixed in repairs. |
| 57 | S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed. |
| 58 | S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe |
| 59 | S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. . |
| 60 | S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) |
| 61 | S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 62 | Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. |
| 63 | S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 64 | S&F in repairs stop valves/angle valvefancy type cast copper alloy, chromium plated with long shank and cup for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. . |
| 65 | S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed |
| 66 | S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated forbasins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy typepillar tap 15mm bore,screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed. |
| 67 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding. |
| 68 | S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device. |
| 69 | S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairscomplete all as specified and directed. |
| 70 | S & F in repairs chromium plated soap dish complete all as specified. |
| 71 | S&F in repair CP brass Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed |
| 72 | S&F in repairHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 73 | S&F in repairs vitreous china wash basin, white, flat back, size550x400m excluding taps, waste , chain & plug & porcelain stopperincluding brackets incl cutting for pinning in ends of bracketes or erecting standand fixing and supply and waste pipe complete all as specified and directed |
| 74 | Taking up or down GI tubing/PVC 15mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 75 | Supplying and laying20 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed |
| 76 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 77 | Supplying and laying25 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed |
| 78 | Demolition and breaking up drain pipes (salt glazed ware, PVC (SWR), AC or Reinforced concrete) internal dia of pipe in 75mm set in cement mortar complete all as specified and directed |
| 79 | S&F 75 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixedcomplete all as specified and directed |
| 80 | S&F 75mm dia PVC (SWR) branch piece single (single \"Y\") equal or unequal with acess door. |
| 81 | S/F of 40 mm dia high density polyethelenepipe (HDPE) of pressure rating 6 kg/ sq cm laid in trenches complete all as spd |
| 82 | S&F 32mm dia PVC waste pipe fixed in repairs.Including Cup bracketcomplete all as specified and directed. |
| 83 | S&F in repairs, wash down water colset (wall hung type ) with seat coverof jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10953BIUFSM(inlusive of brackets),to pedestal pan including all joints, trapete. |
| 84 | S&F Door closer hydraulically regulated, designation No 3, universal type and fixed, Aluminium (die cast) body fixed in repairs |
| 85 | Providing and fixing in repairfactory made 18 mm thicksolid PVC sheet single side wood grain printed PVC sheet, for cabinet/cupboard shutter 18 mm thick sheet shutter incl frame work of denisity 600 kg/m3 bent at 90 degree and finished all edges at all level for making edges at all level for making edges, lipping/bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding tape, incl hinges, hasp and staple, magnetic lock, SS handle etc complete all as specified and directed. |
| 86 | S&F in repair 15 mm bore 2-in-1 bib cock with flange complete all as specified and direcrted |
| 87 | S&F CP Wallmixer with regular spout W/M15mm diafixed in repair complete all as specified and directed. |
| 88 | M & L for cement concrete 1:4:8,75 mm thick type D-1,(using 40mmgraded stone aggregates),andlaid in as floor subbase finished fair and even without using extra cement complete all as specified and as directed. |
| 89 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 90 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, set, jointed all as specified and as directed by Engr-in-charge. |
| 91 | Dismantling wall and ceiling boards any description, any thickness, including cover fillets |
| 92 | S&F Solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet and fixing at site on PVC frame complete all as specified and directed |
| 93 | S&F 5mm thick PVC Sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed. |
| 94 | S/F ofSign Bd, cladding, front elevation andmodular kitchen and built with retro over 3 mm thick ACP sheet duly laminated incl ecco painted fixed incl MS Framing complete all as specified and directed |
| 95 | Taking down carefully aluminum / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switches, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 96 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, 60 mm deep with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc.complete all as specified and directed by Engineer-in-Charge for the following points:- |
| 97 | One light point/Ceiling/Exhaustcontrolled by one switch |
| 98 | One 6A socket point controlled by one switch on independent board |
| 99 | One 6A socket point controlled by one switch on same board |
| 100 | All as per srl item no. 96.00 here-in-before but with 2.5 sq mmFRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socketpoint controlled by one 16 Amp switchon independent board. |
| 101 | M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length) |
| 102 | 2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire) |
| 103 | 2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire) |
| 104 | Supply & Fix in replacement of modular switch one way 6 amp 1 module all as specified and directed |
| 105 | S&F in replacement of modular switch one way 16 amp 1 module all as specified and directed |
| 106 | S&F in replacement of modular socket 6 amp 2/3 pin combined 2 module all as specified and directed |
| 107 | S&F in replacement of modular socket6/16 - 2/3 pin combined 2 moduleall as specified and directed |
| 108 | Supply and fix in replacement of modular bell push switch 6 Amps, 240V, 50Hz complete all as specified and directed. |
| 109 | Supply and fix in replacement of call bell ding dong, AC, 240V, 50Hz complete all as specified and directed. |
| 110 | Supply and fix in replacement of ceiling rose 6 Amps, 3 plate, 240V, 50Hz complete all as specified and directed. |
| 111 | Supply and fix in replacement of Modular fan regulator step type in 5 steps, 240V, 50Hz |
| 112 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 113 | Supply and fixingin replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 114 | Supply and fix in replacement of recessed mounted LED panel light 2\"x2\" size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified and directed. |
| 115 | Supply and fixing in replacement of LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 116 | Supply and fixing in replacement of LED flood light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specifed and directed. |
| 117 | Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. |
| 118 | Taking down existing old ceiling / exhaust fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades and deposited to AGE E/M store yard complete all as specified and directed. |
| 119 | Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 120 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 121 | Supply and fix MCB distribution board, SPN, 12 way in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note:MCBs shall be measured and paid separately. |
| 122 | Supply and fix MCB 40A - 63A, 10 KA, SPN, \"C\" curve, 240 V, 50 Hz complete all as specified and directed. |
| 123 | Supply and fix MCB 6 - 32A, 10 KA, single Pole, \"C\" curve, 240 V, 50 Hz complete all as specified and directed. |
| 124 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified and directed. |
| 125 | Taking down carefully the electric storage type water heater of capacity up to 50 liters from its installed position by disconnecting all water and electric supply connections for necessary repairs, opening the geyser carefully, identifying and replacing the defective parts, reassembling and reinstalling in its existing location or new location and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. Note: The spare parts required shall be measured and paid separately under relevant items as \"Supply Only\". |
| 126 | Supply only heating element 1500 Watts / 2000 Watts of any type suitable for existing model of geyser 25L/50L. |
| 127 | Supply only thermostat of any type suitable for existing model of geyser 25L/50L |
| 128 | Supply only apparatus plate of any type suitable for existing model of geyser of capacity 25L/50L. |
| 129 | Supply only safety valve of any type suitable for existing model of geyser of capacity 25 L / 50 L |
| 130 | Supply only indicator lamp Red / Green of any type suitable for existing model of geyser of capacity 25L/50L. |
| 131 | Supply and fix in replacement of flexible PVC connection pipe 450mm long suitable for Hot/Cold water application including taking down existing unserviceable PVC connection pipe of any description complete all as specified and directed by Engineer-in-Charge. |
| 132 | Removing defective window/Split type air conditioner of any make and capacity from various locations and transporting to contractor workshop to carry out necessary repair as mentioned in respective item including cleaning the air conditioner with water and air pressure and to replace un-serviceable spares parts and re-fixing at various locations after repairing including testing on load at site all as directed by Engineer-in-Charge.(All spares compressor, fan motor, relay, capacitor, over load, shall be measured and paid separately under supply only item) |
| 133 | Removing unserviceable burnt sealed compressor from Air conditioner and fixing only new rotary compressor of any capacity including necessary welding the same with existing refrigerant pipe, supply & charging refrigerant gas including testing all as specified & directed by Engineer-in-Charge.Note:- i)Rotary compressor shall be measured and paid separately under supply only item)ii)If any item required to made equipment functional like cappliary,copper pipe ect is deemed to be included in quoted rate. |
| 134 | Taking out Window/Split type Air conditioner of any make and capacity from position and cleaning the complete cooling coil & condenser coil with chemical base solution and water including servicing, oiling, greasing complete air conditioner checking of blower motor, electrical connection and re-fixing the same on its original position and testing complete up to satisfaction of Engineer-in-Charge.(If any spare is required to replaced the same to be measured and paid separately under supply only item) |
| 135 | SUPPLY ONLY ITEMNote :i)The element of fixing is deemed to be included in respective Schedule ‘A’ Items)ii)If any item not consumed during the contract period the same is taken on ledger charge through Receipt Voucher if Required. iii) All replacement for failed/unserviceable compressor shall be guaranty of not less than 12 months of all such replacement.If any compressor burnt during guaranty period the same has replaced by contractor without taking any extra cost including supply & charging refrigerent gas. |
| 136 | New Rotary type compressor of Capcity 1.5 TRMAKE : Kirloskar/Tecumesh/Carrier / Hitachi / Blue Star /LG/ samsung |
| 137 | New Rotary type compressor of Capcity 2.0 TR MAKE : Kirloskar/Carrier / Hitachi / Blue Star / LG / samsung/ Highly |
| 138 | FHP motor of capacity 1/5 to 1/18 single phase 920/1440 RPM with capacitor suitable for window/split type AC of any make & capacity.Make : AUE |
| 139 | Starting capacitor 80-100 MFD/ 100-120 MFD/120-150 MFDMake: Keltronor / Siemens |
| 140 | Running Capacitor 45/50 MFD or 45+6 / 50+6 MFD Make : EPCOS / Siemens |
| 141 | Running Capacitor 36 MFD / / 36+6 MFD Make : EPCOS |
| 142 | Starting relay suitable for 1.0/ 1.5 / 2.0 TR CompressorMake: HI-tech/Classic |
| 143 | Air filter Nylon/plastic type suitable for window / Split type A/C . |
| 144 | Thermostat suitable for window / Split type A/CMake : INDFOSS/Godrej |
| 145 | Front grill for window type AC of any model all as required at site and as directed(Make: LG/ Lancer/ Blue star/ Fedder Lloyed/ Carrier/samsug/voltas) |
| 146 | Condenser/cooling fan blade suitable for window type AC of any make & capacity |
| 147 | Blower unit only suitable for window AC of any capacity & make |
| 148 | PCB card along with remot suitable for window/split type AC of any capacity & make |
| 149 | Digital circuit plate along with remot suitable for windoe/split type AC of any capacity & make |
| 150 | Blower Motor both end coupling complete for Indoor split AC 1.5 / 2.0 TR of any make |
| 151 | Supply only Refrigerent Gas R-22 in returnable company sealed cylinder complete |
| 152 | Supply only Refrigerent Gas R-134a with company sealed cylinder complete |
| 153 | M & L for gas charging M/R-12 / M/R-22 / R-134a / R410a / R32 / M/R-407c to the following appliances & AC plant including removal of old fitter, copper tubing / capillary and replacement of new filter, capillary, short piece of copper tubing of equipment and leakage testing of the same on full load after re-installation of the same at site complete all as specified and directed: - |
| 154 | Window type air conditioner 1.5 Ton capacity of any make. |
| 155 | Split type air conditioner 1.5/ 2.0 Ton AC capacity of any make. |
