Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with sub class ‘B’ bricks (old size bricks), straight or curved on plan, exceeding 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 3 | All as per serial item No 2.00 here-in-before but except bricks (using old serviceable bricks obtained from ser item No 1.00 here-in-above) complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Demolitionof reinforced concrete such as roofs, floors, beams, staircase, landing, chajjas, facia and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F Mild steel framed work as in chajjas or gates of angles or other sections with gusset plates, ladders, complete drilled for fixing of steel sheeting or other covering, doors etc., to be prepared for hanging or sliding with andincluding hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe 410-W (Gde E-165) complete all as specified and as directed. |
| 8 | Dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof chajja covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 11 | Repair to RCC sunshades, chajjas, balconies, coloumns, bands, beams and similar RCC work at any position/ height by dismantling loose/ disintegrated portion and fixing of chicken wire mesh of size 12.50 mm x 1.00 mm securing with clips/ chicken wiremesh wherever required and dubbing out with cement concrete 1:1.5:3, 15 mm to 50 mm thick, using 6 to 12 mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to 04 storey building, if required and finished with 5 mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 12 | NOTE : Supply only chicken wire mesh will be measured and paid separately under respective items. |
| 13 | Supply only chicken wire mesh of size 12.5 mm x 1.00 mm complete all as specfied and as directed by Engineer-in-Charge. |
| 14 | Taking down cement plaster on brick/ stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for 15 mm thick rendering cement plaster in Cement mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement and providing necessary scaffolding, safety precautions and other requisite arrangements complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for rendering 15 mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface fair and even without using extra cement and providing necessary scaffolding, safety precautions and other requisite arrangements all as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 17 | M&L for 5 mm thick rendering in CM 1:3, finished even and smooth without using extra cement, on ceiling, chajjas, facias, at any position, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L for Screed bed or bedding layer 15 mm thick in CM 1:6, for laying floor finishes complete all as specified and as directed by Engineer-in-Charge. |
| 21 | M&L for Rendering 10 mm thick in CM 1:4 brick work or concrete surface, finished even and rough complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for glazed coloured ceramic tiles in vertical surface 350 mm x 450 mm x 7 mm thick or 300 mm x 450 mm x 7 mm, joint free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and labour for non skid, joint free first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Material and labour for double charged Vitrified Ceramic tiles light shade 10 mm thick First quality (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 25 | All as per serial item No 23.00 here-in-before but as in skirting including necessary cutting as directed complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Dismantling of boarding, any description, fixed in any position, fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and labour Powder coated Gl frame work grid 605 x 605 mm for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with andincluding ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 3mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Material and labour for 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and as directed. |
| 29 | S&F 18 mm thick solid WPC (wood polymer composite) board, interior grade, one side pre-laminated/ rigidlam with any colour and other side balancing lamination, fixed with screws as in cupboards/ kitchen/ cabinet shutter/ drawers etc., fixed with screws, solvent cement, adhesive complete all as specified and as directed. |
| 30 | S&F 25 mm thick solid WPC (wood polymer composite) board, interior grade, one side pre-laminated/ rigidlam with any colour and other side balancing lamination, fixed with screws as in shutters of cup boards and kitchen cabinets,complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply & Fixing 18 mm thick HDHMR Board for Cup board and shutters prelaminated both sides, as per approved design manufactured from hardwood and having uniform density gradient & compact core withdensity over 650 kg/m3, complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F in repair magnetic cathcher for kitchen cabinet/ cupboard fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F in repair for continuous (piano) hinges, mild steel bright finish, width of flap 30mm, complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Taking down chowkhat not exceeding 1.5 sqm each with or without taking off shutter and removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Taking down chowkhat exceeding 1.5 sqm each but not exceeding 4.00 sqm with or without taking off shutter and removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Taking down shutters exceeding 1 sqm but not exceeding 2 sqm each & removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 37 | M&L for Resecuring or easing & adjusting shutters of any description exceeding 1 sqm and not exceeding 2 sqm and refixing in same opening complete all as specified and as directed by Engineer-in-Charge. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 40 | S&F of pressed steel frame for doors with single rebates of size 125 x 60 mm made with steel sheet of 1.25 mm thickness in and including necessary fixing lugs, hinges, lock strike including filling of cement concrete 1:3:6, type C-1 in frame complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F of pressed steel frame for doors with single rebates of size 105 x 60 mm made with steel sheet of 1.25 mm thickness in and including necessary fixing lugs, hinges, lock strike including filling of cement concrete 1:3:6, type C-1 in frame complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M&L for cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, back fill of chowkhat, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water trought and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and Fixing 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing stainless steel barrel tower bolt, 150 mm size (ISI Marked) of extruded section complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing stainless steel barrel tower bolt, 100 mm size (ISI Marked) of extruded section complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fixing Stainless steel sliding door bolt (ISI Marked), 250 mm long hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge. |
| 48 | S&F 100 mm size butt hinges, stainless steel with galvanised mild steel hinge pin complete all as specified and as directed by Engineer-in-Charge. |
| 49 | S&F 100 mm size stainless steel handle (ISI Marked) extruded type, complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F 150 mm size stainless steel handle (ISI Marked) extruded type, complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 52 | Note:- (i) Thickness of powder coatings shall be not less than 30 micron.(ii) Weight of the aluminiumn sections only shall be measured and paid.(iii) Aluminium doors window/ ventilators to be fixed to jambs with cadmium plate screws.(iv) The rate shall be inclusive of neoprene beadings, handles, hinges, screws etc. weight of fittings/ fixtures will not be measured for ariving the weight of aluminium section.(v) Glass panes and panels shall be measured & paid separately under respective items. (vi) Design shall be approved from Engineer-in-Charge as per existing at site before fabrication and plaacing bulk order to the manufacturer. |
| 53 | S&F Powder coated aluminium window andventilator shutters, side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodisedaluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1 no.) completeallasspecified all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 54 | S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fixing 4.80 mm thick sheet glass, ordinary quality, tinted, fixed in any type of frame, size not exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Supply and fixing 4.80 mm thick sheet glass, ordinary quality, tinted, fixed in any type of frame, exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Supply and fixing 3 mm thick Sheet glass, ordinary quality and fixed in any type of frame, size in squares not exceeding 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, concrete or brick surrounds, with necessary fixing arrangements complete all as specified and as directed. |
| 58 | All as per serial item No. 55.00 here-in-above but 4 mm thick, tinted/ frosted sheet glass area not exceeding 0.5 Sqm in each pane, fixed to any type of frame complete all as specified and as directed. |
| 59 | Supply and fixing as in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 61 | M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. |
| 62 | M&L for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 63 | M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 64 | M&L for Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F in repair Floor door stopper, 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F in repair Pillar tap, 15 mm bore, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure with or with out lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in repair 15 mm bore angle valves, cast copper alloy, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F in repair 15 mm bore Bib taps, cast copper ally, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge. |
| 69 | S&F in repair PVC valveless syphonic action type flushing cistern, low level, white, with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/ pedastal pattern etc complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fixing 15 mm bore tubes, “medium grade”, galvanized iron, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 73 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing 20 mm bore tubes, “medium grade”, galvanized iron, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply and fixing vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F sinks with drainage board, made of stainless steel 1 mm thick, for kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket to connecting union to pipe overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Supply and fixing plastic water closet seat cover, white, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 79 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 80 | S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith all fittings, fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 81 | S&F in repairs for 15 mm bore brass Chromium plated wall/ basin/ sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and as directed by Engineer-in-Charge. |
| 82 | S&F in repair 15 mm bore, brass, chromium plated, mixer for mixing Hot and Cold water screwed down for iron pipes for center hole WHB mixer complete all as specified and directed by Engineer–in-Charge. |
| 83 | S&F in repair vitreous china wash hand basin, white, flat back type of size 550 mm X 400 mm including waste, chain, flush pipe, MS Angle bracket suitable length complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | S&F Bath cabinet of size 600 mm x 450 mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | S&F 25 mm dia Curtain rod (Harrison rails), mild steel chromium with fixing brackets, stops, end rollers etc. for curtain rod including taking down defective bracket complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | Supply and fixing in repair towel rail 600 mm long of PTMT, chromium plated fixed with and including chromium plated screws and wooden/ plastic cleats (minimum weight 190gms), complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | S&F in repair of brass chromium plated shower rose, 125 mm size with long swivel plush CP arm complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | S&F in repair of Sheet glass shelf assembly made out of 5.5 mm thick sheet glass shelf, 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by the Engineer-in-Charge. |
| 89 | S&F corner glass shelf assembly made out of 5.5 mm thick toughened glass, 300 mm radius, bevelled edge/ hatching of edgesfixed with stainless steel \"D\" brackets with railing complete all as specified and as directed by the Engineer-in-Charge. |
| 90 | S&F 110 mm Bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning complete all as specified and as directed by the Engineer-in-Charge. |
| 91 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | S&F 75 mm Bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer-in-Charge. |
| 94 | Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 95 | Material and labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over 15 mm thick screed in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 96 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situations complete all as specified and as directed by the Engineer-in-Charge. |
| 97 | S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank complete all as specified and as directed by Engineer-in-Charge. |
| 99 | M&L for Cleaning and removing all scale and dirt, etc. from tanks any height and form mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-Charge. |
| 100 | S&F in repair PVC connections, 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge. |
| 101 | S&F Vitreous China wash down Single piece EWC water closet pan along with cistern (pedestal pattern), white (with all fittings) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 102 | SMART PERIODICAL |
| 103 | Material and labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper up to 6 metre height including necessary scaffolding and safety arrangements complete all as specified and directed by Engineer-in-Charge. |
| 104 | Material and labour for preparation of old decorated ceiling surfaces and applying one coat of oil bound distemper on ceiling including necessary scafolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge. |
| 105 | M&L for Complete removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc., using mechanical means like mechanical sander etc., with internal dust extraction system including expose sound substrata for further surface preparation prior to painting work complete all as directed by Engineer-in-Charge. |
| 106 | Material and labour for applying two coats of oil bound distemper including one coat of primer over newly plastered wall surfaces (incl preparation)/ over wall surfaces prepared uner serial item No. 102.00 here-in-before upto 6 metre height including necessary sacffolding and safety arrangements, complete all as specified and as directed by Engineer-in-Charge. |
| 107 | Material and labour for applying two coats of oil bound distemper over and including one coat of primer on the newly plastered ceiling surfaces (incl preparation)/ over ceiling surfaces prepared uner serial item No. 102.00 here-in-before, complete all as specified and as directed by Engineer-in-Charge. |
| 108 | M&L for applying 1.00 mm thick layer of cement based wall care putty on surface of wall/ ceiling complete all as specified and directed by Engineer-in-Charge. |
| 109 | Material and labour for preparation of old plastered surfaces of walls and applying onecoat of cement based paint complete all as specified and as directed by Engineer-in-Charge. |
| 110 | Material and Labour for widening of cracks from wall/ ceiling surfaces in V Groove upto 5 mm deep by using scrapper blade or angle cutter and filling the crack by applying a layer of acrylic crack filler paste or similar material complete all as specified and as directed by Engineer-in-Charge. |
| 111 | Material and Labour for applying with 1 coat of exterior primer which provides exceptional whiteness and opacity and ensures strong adhesion of the top coat. Priming work to be carried out post all repair and preparatory works including cleaning the surface from loose particles, dust and other foreign materials using water by pressure washer all as directed by Engineer-in-Charge. |
| 112 | Material and Labour for applying with 1 or 2 coats of acrylic waterproof primer coating which is formulated with acrylic polymers having crack bridging ability of upto 1mm, tensile strength of 1.8 mpa, 100% elongation and can withstand upto 5 bars hydrostatic pressureto provide better mechanical strength and adhesion to the surface all as per manufacturer\"s instruction. Priming work to be carried out post all repair and preparatory works including cleaning the surface from loose particles, dust and other foreign materials using water by pressure washer all as directed by Engineer-in-Charge. |
| 113 | Material and Labour for applying 2 coats of modified acrylic exterior emulsion over prepared surfaces (new/ old decorated) having excellent scrub and peel resistance, superior whiteness, excellent finish, resistance to fading of colours, advanced anti fungal and algal protection against all round weather and paint performance of Mininimum 5 Years so as to obtain an acceptable finish all as per manufacturer\"s instruction and as directed by Engineer-in-Charge. |
| 114 | M&L for Providing and applying waterproof wall putty (cement-based or polymer-modified as approved) in two or more coats over new/ old decorated plastered surface to achieve smooth, even finish surface suitable as required for uniform application and curing as per manufacturer’s instruction and as directed by Engineer-in-Charge. |
| 115 | Note for Serial item no 100.00 to 111.00:(a) The work pertaining to periodical services shall be executed as per MoU between tenderer and manufacturer of paints and their authorised applicator after approval by the GE as per MoU performa attached at Serial page No. 171 & 172. (b) The Contractor shall upload with the documents under cover I \"Memoradum of Understanding\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall not be opened and shall be liable to rejected.(c) Scaffolding, trestles, ladders, cradles and protective measures etc, as necessary for execution of work shall be arrenged by the contractor without any extra cost to the department.(d) Authorised applicator of the company with trained painters will only be allowed to execute the work and the applicator will submit the experience certificate from the company......Contd.. |
| 116 | Contd...(e) The entire quantity of material will be calculated and brought in a maximum 3 phases and will be accepted only post verification of PVs and Challan from the company through Mail.(f) Material will be kept in the custody of MES rep and will be issued to the authorised applicator as per requirement.(g) Packing material/ empty Buckets will not be handed over to the contractor and will be destroyed after completion of work through a BOO......Contd |
| 117 | Contd...(g) Buildings will be handed over to the contractor in a phased manner and subsequently to the authorised applicator only after completion of civil work like plastering/ repairing as required.(h) Entire work will be divided into four stages as under and will be certified by a company technical rep whether the stages completed are as per manufacturer’s instruction and passed by Engr-in-Charge/ GE:-(a) State :1Preliminary Inspection (b) Stage 2:Preparation of surface(c) Stage 3: Priming / Base Coat(d)Stage 4: Final coat of painting.....Contd |
| 118 | Contd...(j)Stage passing register will be properly maintained duly signed by all Concerned.(k) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc. shall be done using mechanical sander with internal dust extraction system for clean environment.(l) All priming/ painting work will be done by mechanical sprayer only.(m) All rates quoted will be inclusive of all scaffolding as and when required as per the schedule attached and no work will be allowed without proper scaffolding, height of each building are as indicated in the list of buildings.(n) The contractor shall submit manufacturer generated 05 years warranty card for each building during submission of RAR and Final Bill.(o) A guaranty amount @ 10% will be kept as reserve till completion of warranty period and will be released thereafter. (p) Any deterioration during the warranty period will be rectified by the manufacturer without any financial effect. |
| 119 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as specified and as directed by Engineer-in-charge. |
| 120 | Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing concealed conduit of suitable size bore with all fittings terminated on and including new modular GI metal sunken box of thickness not less than 1.2 mm and suitable size of frame, cover for mounting modular switch, socket and regulator fixed on surface flush with wall, for One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator, complete all as specified and as directed by Engineer-in-Charge. |
| 121 | All as per serial item 113.00 here-in-before but for socket outlet 3 pin 5 Amps on same board complete all as specified and as directed by Engineer-in-Charge. |
| 122 | All as per serial item No 113.00 here-in-before but for one socket outlet 3/ 5 pin, 5 amps on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 123 | All as per Serial item No 113.00 here-in-before but for one socket outlet 3/5 pin, 15 amps on independent board size of cable 2.5 sqmm for phase, neutral & 2.5 sqmm as earth wire complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly drawn in and including concealed PVC conduit of suitable size bore with all fittings terminated on and including new modular GI metal sunken box of thickness not less than 1.2 mm and suitable size of frame, cover for mounting modular switch, socket and regulator fixed on surface flush with wall, for One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator, complete all as specified and as directed by Engineer-in-Charge. |
| 125 | All as per serial item No. 117.00 here-in-before but for socket outlet 3 pin 5 Amps on same board complete all as specified and as directed by Engineer-in-Charge. |
| 126 | All as per serial item No. 117.00 here-in-before but for one socket outlet 3/ 5 pin, 5 amps on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 127 | All as per Serial item No 117.00 here-in-before but for one socket outlet 3/5 pin, 15 amps on independent board size of cable 2.5 sqmm for phase, neutral & 2.5 sqmm as earth wire complete all as specified and as directed by Engineer-in-Charge. |
| 128 | S&F modular switch, one way, 6 Amps, one module, 230 volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S&F modular switch, one way, 16 Amps, one module, 230 volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 130 | S&F modular bell push, 6 Amps, 2 module, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 131 | S&F Modular socket outlet, 2 in 1, 3 pin 6 Amps, single pole, two module, ISI marked, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 132 | S&F Socket outlet mdoular type, multipurpose, 2/3 pin, single pole, two module, 6/16 Amps complete all as specified and as directed by Engineer-in-Charge. |
| 133 | S&F Modular fan step regulator, 120 watts, 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 134 | S&F Ceiling rose 3 pin, 230 volts, PVC polycarbonate insulated body complete all as specified and as directed by Engineer-in-Charge. |
| 135 | S&F call bell, multi music type, AC, 230 Volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 136 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. |
| 137 | S&F LED Blub, 9 watt, Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and as directed by Engineer-in-Charge. |
| 138 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 139 | Supply and fixing in repair LED light fitting, mirror light with high out put diffuser, 2 feet, 10 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 140 | S&F in repair LED light fitting, 1 x 9W/ 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 141 | S&F in repairs LED 18W Recess/ Surface mounted, indoor type back lit downlighter suited for any modern workspace of size not less then 6\"\" round/ square complete all as specified and as directed by Engineer-in-Charge. |
| 142 | S&F in repairs decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base, perfect ambience for living/ bedroom complete all as specified and as directed by Engineer-in-Charge. |
| 143 | Taking down and refixing same serviceable LED Tube lights/ bulk head/ wall mounted/ down light/ ceiling light of different type after cleaning and connecting up with suitable flexible wire from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 144 | S&F in repairs LED building security light fitting, 1 x 35 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded in PVC cover having top opening separate driver compartment with IP65 protection including light mounting bracket made out of 25 mm bore GI light grade pipe of up to 1.2 metre length bent to shape as required including clamps of suitable size and connection complete all as specified and as directed by Engineer-in-Charge. |
| 145 | S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps, 240 Volts for AC/ Geyser point complete all as specified and directed by Engineer-in-charge. |
| 146 | Disconnecting and taking down old unserviceable sub main wiring complete with batten of any type and size removing materials and making good distrubed surfaces of walls, floors etc., complete all as specified and directed by Engineer-in-charge. |
| 147 | M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 4.0 sqmm, LT, 1100 Volts grade, drawn through and including adequate size PVC non metallic conduit of 25 mm/ appropriate dia with accessories and fittings and one run of 4.0 sqmm single core multi stranded copper conductor (FRLSH) cable as earth continuity conductor with accessories and fittings and connecting to existing main switch board/ DB and testing on completion complete all as specified and as directed by Engineer-in-Charge. |
| 148 | M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.0 sqmm, LT, 1100 Volts grade, drawn through and including adequate size PVC non metallic conduit of 25 mm/ appropriate dia with accessories and fittings and one run of 6.0 sqmm single core multi stranded copper conductor (FRLSH) cable as earth continuity conductor with accessories and fittings and connecting to existing main switch board/ DB and testing on completion complete all as specified and as directed by Engineer-in-Charge. |
| 149 | M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 10.0 sqmm, LT, 1100V grade, drawn through and including adequate size PVC non metallic conduit with accessories and fittings and one run of 10.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and directed by Engineer-in-charge |
| 150 | Note for Srl Item No 140.00 to 142.00: 1. Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length.2. Cable required for connection to DBs shall deemed to be incl in the quoted rates and shall not be measured separately. 3. Earth wire shall run inside the conduit pipe. |
| 151 | Taking down old unserviceable switches, sockets, regulators with sunken box etc., complete all as specified and as directed by Engineer-in-Charge. |
| 152 | S&F modular switch 6 Amp one way 1 module 230 V AC including suitable size of metal flush Box/ white cover plate with frame complete all as specified and as directed. |
| 153 | S&F modular bell push, 6 Amps, 2 module, single pole including suitable size of metal flush Box/ white cover plate with frame complete all as specified and as directed. |
| 154 | S&F modular switch, 16 Amp, one way, 1 module, 230 V, AC including suitable size of metal flush Box/ white cover plate with frame complete all as specified and as directed. |
| 155 | S&F modular socket outlet, 6Amp, 2 module, intel multi socket for all pins 230 V, AC, including suitable size of metal flush Box/ white cover plate with frame complete all as specified and as directed. |
| 156 | S&F modular socket outlet, 16 Amp, 2 module, and 6/16 Amp, heavy duty, 230 V, AC including suitable size of metal flush Box/ white cover plate with frame complete all as specified and as directed. |
| 157 | S&F modular ceiling fan regulator, electronic step type, 5 speed, AC, 230 volts, 2 module, including suitable size of metal flush Box/ white cover plate with frame complete all as specified and as directed. |
| 158 | Disconnecting and taking down old unserviceable DBs/ junction box etc., of any type and size complete along with all MCBs etc., complete all as specified and as directed. |
| 159 | Supply & fixPrewired factory made sheet metal enclosure, double door for MCB distribution board 12 way (2+10 way), SPN, 240 Volts,class IP-43 IK 09 with 200 Amp rated copper bus bar and din rail neutral link, complete all as specified and directed by Engineer-in-charge. |
| 160 | S&F vertical MCB DB, TPN Distribution board, 4 Way, double door, flush mounting with provision for MCBs including connecting, having IP43 protection with 200 Amp rated copper bus bar and din rail neutral link, complete all as specified and directed by Engineer-in-charge. |
| 161 | S&F MCB, Triple pole and neutral (TP&N), 63 Amp, 240 volts, 10 KA, \"C\" series with all incomming/ outgoing connections with proper size lugs, complete all as specified and directed. |
| 162 | S&F MCB, single pole and neutral (SP&N), 40 to 63 Amp, 240 volts, 10 KA, \"C\" series with all incomming/ outgoing connections with proper size lugs, complete all as specified and directed. |
| 163 | S&F MCB, single pole and neutral (SP&N), 32 Amp, 240 volts, 10 KA, \"C\" series with all incomming/ outgoing connections with proper size lugs, complete all as specified and directed. |
| 164 | S&F MCB, single pole (SP), 6 to 32 Amp, 240 volts, 10 KA, \"C\" series with all incomming/ outgoing connections with proper size lugs, complete all as specified and directed. |
| 165 | Refixing of serviceable MCB, any type, with all incomming/ outgoing connections with proper size lugs, complete all as specified and directed. |
| 166 | S&F in replacement Inverter type LED tube light batten, 4 feet length, 1 x 18/ 20 watt, 230 volts with inbuilt Lithium ion battery with charging time 8 to 10 Hours and back up time minimum 4 Hours complete including fitting fixed on wall/ ceiling and connecting up complete with flexible cable white of suitable size and making necessary connection including taking down old batten, any type complete all as specified and as directed. |
| 167 | Taking down carefully Geysers of any capacity and removing with all connections/ fittings and depositing to AGE EM storeyard for keeping in safe custody and refixing, connecting up the same on original site after completion BR repair work, complete all as specified and as directed by Engineer-in-Charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
