|
| 1 | Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.Note: Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a hight G+7 floor. |
| 2 | M&L for 10mm thick cement plaster on brick wall concrete wall surface in CM 1:4 finished even and smooth surface without using extra cement mixing with liquid WPCcomplete all as specified and directed.Note :-(i)Water proofing compound shall be paid separately (ii) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a hight G+7 floor. |
| 3 | M&L rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a hight G+7 floor |
| 4 | M&L for 5mm thick cement plaster on brick/concreteceiling surface in CM 1:3 finished even and smooth surface without using extra cement mixing with liquid WPCcomplete all as specified.Note :-(i)Water proofing compound shall be paid separately (ii) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a hight G+7 floor. |
| 5 | M & L Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of alkaliresistant primer including 2mm wall putty all as spd and directed. |
| 6 | M & L Preparation of newly plastered surfaces of ceiling and apply two coats of oil bound distemper over a coat of alkali primer including 2mm wall putty all as spd and directed. |
| 7 | M&L for applying one coat of oil bound distemper on walls including preparation of old decorated surfaces including filling minor holes with wall care putty and including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and as directed |
| 8 | Complete removal of existing treatment from internal / external plastered or unplastered surfaces of wallscomplete all as specified and directed |
| 9 | M&L for 2mm thick layer(Each coat min 1mm thick)ofwhite putty on scrapped/uneven surfaces of any description to match with the existing surfaces before application of white wash/distemper/cement base paint/Apex paint etc complete all as spd and directed Make : JK Wall care putty/Birla white putty or equvalent |
| 10 | M&L for applying two coat of oil bound distemper on walls after completion of putty work (if required on site) and including preparation ofsurfaces and including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and as directedNote : Putty work shall be paid separtely in relivent items. |
| 11 | Description all as per item here-in-beforebut on ceiling |
| 12 | M&L for applying one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 13 | M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of old surfaces complete all as spd and as directed |
| 14 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 15 | M&L brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed. |
| 16 | M&L rendering 15 mm thick in CM (1:4) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for broken glass coping on top of wall with CM 1:3 including taking and removing old unusable glasses complete all as specified and directed. |
| 18 | M&L for applying twocoats of 100% Premium acrylic emulsion paint with rooler/spray having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including water based priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surface complete all as specified and directed. Make : Asian paints (apex ultima)/Berger (weather coat all ground)/Nerolac (excel total)Note:- (i) The application will be done by the specialist agency. MOU will be submitted by the contractor with the OEM.(ii) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a hight G+7 floor. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 20 | S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed. |
| 21 | S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 22 | Dismantling Asbestos corrugated & Semicorrugated etc sheetin in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed at site complete all as specified and directed. |
| 23 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | M&L for grinding polished the terrazo tile/kota stone flooring/marble stone flooring and wall complete including wax polished all as spd. Note standard size machine shall be used for griding floor and hand grinding machine be used for vertical surface ie dado/skirting etc complete all as specified and as directed. |
| 25 | Taking out for repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel, greasing the sides of the rolling shutter and re-fixing rolling shutter for smooth functioning size of rolling shutter not exceeding 25 Sqm each complete all as specified and directed.Note : Rate includes the replacement of broken spring complete all as specified and directed. |
| 26 | S&F 1.25mm lathe thickness Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 27 | S&F Ball bearing for rolling shutterscomplete all as specified and directed. |
| 28 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 29 | M&L preparation of new steel & iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paintover and including one coat of primer complete all as specified and directed. |
| 30 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar |
| 31 | M&L for rubber moulded prepolished coloured precast concrete interlocking paver block60mm thick of any shape and size with white cement and pigment confirming to IS 15658-2006 M-35 Grade, complete all as specified and directed. |
| 32 | M&L Sand filling/stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed. |
| 33 | Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed. |
| 34 | Cleaning and removing all scale and dust from tanks of capacity 500 litres-2000Ltr and from mouth of circulating pipe etc including disconnecting water pipes, tanks if necessary and refixing the same after necessary cleaning and writing letters \"TANKS CLEANED ON\" and date in \"DDMMYYYY\" format in any tint, as per requirement not exceeding 7.5cm in height letters using synthetic enamel paint complete all as specified and directed. |
| 35 | S&F In repair 20 mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenchescomplete all as specified and directed. |
| 36 | S&F In repair 25 mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete all as specified and directed. |
| 37 | S&F In repair 32 mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete all as specified and directed. |
| 38 | S&Fin repairs (SINTEX) over head water tank cover for tank capacity 500,750&1000 litr with fixing bracket and screwcomplete all as specified and directed. |
| 39 | S&F in repairs (SINTEX) over head water tank cover for tank capacity 2000 litr with fixing bracket and screw complete all as specified and directed. |
| 40 | Running welding in repairs thickness of metal to be welded exc 6mm n.exc 9mm complete all as specified and directed. |
| 41 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 42 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqmand making good to distrubed surface without any extra cost complete all as specified and directed. |
| 43 | Taking down Shutters of any description exc 1 sq. m n.exc 2sqm each and refixing in the same opening after repair work complete all as specified and directed. |
| 44 | S&F repairs Powder Coated(minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 45 | S&F repairs Powder Coated(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazingclips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. |
| 46 | S&F repairs Powder Coated(minimum thickness of powder coating 50 micron)aluminium window and ventilator shutters(wire mesh shutter and glaze shutter), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 47 | S&F Aluminium powder coated decogrill make DG 104(10mm thick section) with frame of section not less than 0.136kg/Rm with F channel |
| 48 | S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses complete all as specified and directed. |
| 49 | S&F stainless steel wire cloth 0.56 mm nominaldia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed. |
| 50 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 51 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 52 | M&L 15mm thick Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishesin CM 1:6 complete all as specified and directed. |
| 53 | M&L prepolished coloured chequred cement concrete tiles 300X300X25 mm size set in screed bed 20 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 54 | Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed. |
| 55 | M/L Cement concrete type C2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete/Subbase complete all as specified and directed. |
| 56 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection,subbase etc complete all as specified and directed. |
| 57 | Removing building materials etc.to a distance of upto 20 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 58 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 59 | Material and labour for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs,manhole cover and similar work including necessary form work complete all as specified and directed. |
| 60 | S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bendingspirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified. |
| 61 | Supply and fix mild steel round bars 10mm dia FE 410W Gde E-250 quality A or Fe 290 gde E-165 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for man hole cover handle complete all as specified and directed. |
| 62 | Dismantling wall/ceiling boarding, any description, fixed in any position with nails/screws/grid including taking down E/M fittings/fixtures on ceiling and refixing the same after completion of work to make it functional complete all as specified and directed. |
| 63 | S&F anodised aluminium snap grid frame work for false ceiling 605x605mm grid size complete all as specified and directed. |
| 64 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 65 | M&L for 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. |
| 66 | Taking down old tarfelt water proofing treatment on roof surfaces and removed from site complete all as spd and directed. |
| 67 | Material & Labour for 15mm thick rendering on roof surfaces in cement mortar (1 : 4) using with WPC finishes the surface even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be paid separately |
| 68 | M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete all as specified and directed. |
| 69 | M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.) |
| 70 | M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer complete all as specified and directed. |
| 71 | M&L for applying two coats of bitumen based aluminium painting on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed. |
| 72 | S&F in repairs Welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4kg per sqm Note : Rate also includes for necessaryscaffolding /Jhoola work to carry out work upto a hight G+7 floor complete all as specified and directed. |
| 73 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.(Paymentfor providing grooves shall be made separately). |
| 74 | S&F (Ornamental gate) Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-1657 including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.ornamental and intricate design complete all as specified and directed. |
| 75 | Supply and erection Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-3109 Mtr long. Poles shall be painted with two coats of black bituminous paint throughout internally, and externally up to the planting depth.The remaining portion of the exterior shall be painted with one coat of red oxide primer including taking down old unserviceable pole complete all as specified and directed. |
| 76 | M&Lgalvanised, iron pipe of dia 32 mmwith all fittinglaid in trenchescomplete all as specified and directd |
| 77 | M&L for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.5meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers.GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :-(a)GI wire of 4 mm dia.(b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits)(c)Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm diamild steel TMT bars suitable for carrying of pit cover. |
| 78 | M&L for earth continuity conductor4.00 mm diapassing through & includingConduit/pipe anyof size main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as requireddia galvanised iron wire complete all as specified and directed. |
| 79 | M&L for earth continuity conductor GI stripe25x4 mm passing through & including PVC Conduit of anysize main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as requireddia galvanised ironstrip complete all as specified and directed. |
| 80 | Supply and laying in trenches, fixed to wall / pole/ tray etcUG cable XLPE insulated armouredheavy duty electric UG cable with aluminiumconductor1100 volts grade of cross sectional areaof following sizeincluding taking down old unseriveable cable complete all as specified and directed. |
| 81 | 16 Sqmm 4 Core |
| 82 | 25 sqmm 4 Core |
| 83 | 35 Sqmm 3.5 Core |
| 84 | 10 Sqmm 2 Core |
| 85 | 6 sqmm 3 core |
| 86 | M&Lgalvanised, iron pipe of dia 25 mmwith all fitting; laid in trenches complete all as specified and directd |
| 87 | Excavation in trenches in soft/loose soil not exceeding 1.5m depth & not exceeding 1.5m in width over energised LT cables for carrying out brick work for protection of cable duct including for taking out and relaying of LT Cables complete all as specified and directed. |
| 88 | Excavation in trenches,hard dense soil/,black top bitumin /PCC n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil/hard soil/bituman surface complete all as specified anddirected |
| 89 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick as in soft/loose soil complete all as specified and directed. |
| 90 | M&L for sub class \"B\" burnt brick flat across the cable, for protection of cable laid in trenches complete all as specified and directed |
| 91 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 92 | Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and directed.Note - Punned thickness shall be measured. |
| 93 | Supply and laying in replacement of old unserviceable GI pipe medium grade of 50mm dia including GI fittings laid in trenches for protection of UG cable complete all as specified and directed. |
| 94 | All as per item No.88.00 above but 40 mm dia. |
| 95 | M&LforGIfitting / Galvanised Nipple dia32mm x 225 mm for street lightcomplete all as specifiedand directed |
| 96 | M&L for boring of holes under road , pavement , hard standing by trenches techonology using ultra sound technology/ mannualy mechanically and necessary machine for 100 mm dia GI pipe complete all as specifed and directed. |
| 97 | Supply and fix in replacement of4 Pole MCCB,400Amp, 50 Hz, 415 V with microprosessor release based,100% ICS=100% ICU, 36 KA complete all as specifed and directed. |
| 98 | All as per item Ser No 92.00 above but of capacity 250Amps. |
| 99 | All as per item Ser No 92.00 above but of capacity 200Amps. |
| 100 | Supply and fix in replacement of4 Pole MCCB, 160 Amp, 50 Hz, 415 V with thermal magnetic release based,100% ICS=100% ICU, 25KA complete all as specifed and directed. |
| 101 | M&L for GI bracket made of 40 mm medium grade GI pipe bend to shape approx 1.2 mtr length incl mild steel flat iron Clamps with nut bolts etc complete for fixing of street light including taking out old unserviceable GI brackets complete all as specified and directed. |
| 102 | S&F Junction box SMC KIOSK box water proof IP-67 of size 225x29x122 mm includingfixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole making hole on pole as per site complete all as specified and directed. |
| 103 | S&F in replacement of Junction box SMC KIOSK box water proofIP -67of size 140x140x95 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specifed and directed. |
| 104 | S&F in replacement of Junction box SMC KIOSK box water proofIP-67 of size 300x200x125 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specifed and directed. |
| 105 | M&L for Copper conductor cable 2.5 Sqmm 3 core PVCsheathed multi core for connection of street light fittings inserting from top in side the pole and connectingin junction box complete including making Hole in Pole as per Site, complete all as specified and directed |
| 106 | S&F in replacement service cable 1100 volts grade heavy duty PVC insulated copper multistranded conductor served with inner sheathing of size 1.5 Sqmm 3 Core complete including takingdown of old burnt cable complete all as specified and directed. |
| 107 | S&F in replacement Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 45 Watt including taking down old unserviceable complete all as specifed and directed. |
| 108 | S&F in replacement New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 90 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable complete all as specifed and directed. |
| 109 | All as per item No 103.00 abov ofbut capacity of led street lightled120 Watt |
| 110 | All as per item No 103.00 above but capacity of led street lightcapacity 150 Watt |
| 111 | S&F in replacement of driver for 45 W LED street light fitting complete all as specifed and directed. |
| 112 | S&F in replacement of driver forupto100W LED street light fitting complete all as specifed and directed. |
| 113 | S&F in replacement of driver for 150W LED street light fitting complete all as specifed and directed. |
| 114 | S&F in replacement of LED flood light with pressure die cast aluminium housing 100 Watt Orion 3.0 Series completed with connectionincluding taking down old unserviceable complete all as specifed and directed. |
| 115 | S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light,suitable for highlighting architectural facade and general purpose lighting of capacity LED 120 Watt completed with connectionincluding taking down old unserviceable complete all as specified and directed. |
| 116 | S&F in replacement of LED flood light with pressure die cast aluminium housing 150 Watt Orion 3.0 Series completed with connectionincluding taking down old unserviceable complete all as specifed and directed. |
| 117 | S&F in replacement of LED flood light with pressure die cast aluminium housing 200 Watt Orion 3.0 Series completed with connectionincluding taking down old unserviceable complete all as specifed and directed. |
| 118 | S&F LED Post Top Lantern 25 watt luminaire with diffuser and painted spun aluminium deflector including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light.Included replacementstanding pole up to 3 mtr 32 mm dia or as per site requirmentfor fittingsratedeemed to be included in the quoted rate and including taking down old unserviceable complete all as specified and directed. |
| 119 | S&F in Replacement LED Post Top Bolard light 10 W, UFO shape IP-65 including nesessory excavation and PCC work for fixing including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light .Includedreplacementstanding pole up to 3 mtr 32 mm dia or as per site requirmentforlight fittings deemed to be included in the quoted rate and taking down old unserviceable complete all as specified and directed. |
| 120 | S&F in replacement Environmental friendly, new generation, energy saving, decorative spike light using COB LED 09 watt as light source 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light. Included replacementstanding pole up to 3 mtr 32 mm dia or as per site requirment and forlightfittings deemed to be included in the quoted rate including taking down old unservicable light fittings complete all as specifed and directed. |
| 121 | S&F LED Post Top Lantern 40 watt luminaire with diffuser and painted spun aluminium deflector replacementof standing pole up to 3 mtr 32 mm dia or as per site requirement ncluding taking down old unserviceable complete all as specifed and directed. |
| 122 | S&F in replacement IP 67 rated flexible LED strip light 36 watt including driver 5.0 mtr length to add great color & dramatic effects with extensive pallet of colors including DMX controller with accessories 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate including taking down old unserviceable fitting complete all as specifed and directed. |
| 123 | S&F in replacement Timer switchAstronomical type ,415 Volt three Phase of63 Amps rating with Three Pole ML-4contactor incl one Toggle switch for Auto, off and Manual function and incomming MCB TP internally pre wired and Fitted inside steel enclosure complete all as specified and directed |
| 124 | M & L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole andfilling in road cuts/ hard standing complete all as specified and directed |
| 125 | M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate for base of foundationof polecomplete all as specified and directed. |
| 126 | M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for foundationof pole around polecomplete all as specified and directed. |
| 127 | Supply, installation testing and commissioning of outdoor type LT Panel of size 1000x600x450mm (appx) factory made polycarbonate 3.15 mm thick (shock proof, rust free, corrosion free, dust proof, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free, recyclabel material ) UV resistant, havinghigh grade gasket made of polyurethane, should withstand glow wire test at 96ºC should be flame retardant. The LT panel should be as per CPRI certification IP-65 with switchgear assemblies as per IEC 60439-1. The LT Panel mounted on angle iron frame of size 40mmx40mmx6mm thick including 60 CM height from Ground Level and necessary PCC work 1:2:4 are deemed to be included in the quoted rate complete with multifunctional meter, Phase indicator LED Lamp for RYB phase having front opening Door with locking arrangementsand suitable to accommodate the following :- (a) Main incommer : MCCB 125Amps 4 pole breaking capacity 25 KA, thermal megnetic Release 415 V AC50 HZ,-01 No.(b) Outgoing : MCB SPN 32 Amps C Curvebreaking capacity 10KA - 06 Nos(c)Time switches analog type with battery backup , weekly program, programmable every 4 Hours with back up of 100 hours,current capacity 16 AmpsModel No 3 mod DIN weekly. (d) Power Contactor 3 Pole 63 Amps415 Volts -01 No (e ) Auto mannual selector switch - 01 No. (f) Danger notice Plate duly rivetted on front - 01 No. (g) Panel internal wiring for control circuit with copper cable 2.5 Sqmm. (h) Earth terminal - 02 Nos. Note - Before fabrication of panels the contractor shall be submit detailed general arrangement drawing and single line diagram of all panel for approval. The drgs shall also show foundation details, list of components in the manufacturer\"s reference & bill of materials. |
| 128 | M&L pole painting 9.0 mtr long with a coat of aluminium paint after preparation of old painting surface by scrapping including marking of black and yellow strip not less than 30 cm width with sythethic enamelled paint from copingupto height 1.5 mtr of pole alternative way including necessary `MES & Pole number to be written in the circular yellow batch on the pole complete all as specified and directed.Note - For item ser no 103 to 123The cost of T&P/ladderincluding scaffolding/ rope suspended mobile platform/ suspended / cradle/ hydra/ crane etc and safety equipments of works rateis deemed to be including in quoted rate under respective items being work at multi storeybuildings. |
