|
| 1 | SCHEDULE \"A\" Part-I (Building/Structures) (To be quoted by the tenderer) |
| 2 | Item No 01 : Design and construction of Construction of RCC OVER HEAD WATER TANK of 100000 gallons capacity complete all as specifiedin soil bearing capacity report, design basis report, drawings and tender documents. |
| 3 | Sch \"A\" Part-II (External Electric Supply)Lump sum price worked out by the contractor for (External Electric Supply) as listed in Schedule \"A\" Part-II against the lump sum price inserted by the MES. |
| 4 | Sch \"A\" Part-III(External Water supply)Lump sum price worked out by the contractor for (External Water supply) as listed in Schedule \"A\" Part-III against the lump sum price inserted by the MES. |
| 5 | Sch \"A\" Part-IV(Road, Path Curvert)Lump sum price worked out by the contractor for (Road, Path Curvert)as listed in Schedule \"A\" Part-IV against the lump sum price inserted by the MES. |
| 6 | Sch \"A\" Part-V(Area Drainage)Lump sum price worked out by the contractor for (Area Drainage) as listed in Schedule \"A\" Part-XI against the lump sum price inserted by the MES. |
| 7 | Note for Srl No 3 to 6The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 3 to 6by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule |
| 8 | Schedule \"A\" Part-VI (Miscellaneous items of works) |
| 9 | External Electric supply |
| 10 | Item No 02 :Supply and fixing in repair of digital auto level controller model ALC Mk-I including top mounted, non contact ultrasonic level transmitter (probe unit), level indicating controlling box including system incorporated digital stage level, high & low alarm, pump automation etc. as all complete but without wire from transmitter to controling box as per our enclosed catalogue sensing range upto 5 mtrs ed incl the following accessories:- |
| 11 | Item No 03 : M & L in replacement DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 Sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut ,bolts andincluding provn for fixing 01 no of single pole MCBs 6-32 amps,10KA and MCB TPN 6-32 amps, 10 KA, ‘B’ series = 01 No inside the box complete all as specified and directed. |
| 12 | Item No 04 : Supply and fixing LED flood light luminaries of 120W, with pressure die cast aluminium housing with sealed toughened glass cover in frame ,IP 66 protection andwith all fixing arrangement , nuts, bolts and washer connecting to electric system with 2.5 Sqmm PVC Aluminium stranded conductor 2 core up to require length and to be fixed on 11 Mtr longpole including taking down old unserviceable fitting any type and description complete all as specified and directed. |
| 13 | Item No 05 : S & F 48 W LED aviation obstruction light on OH tank with all necessary connections, complete all as directed and specified. |
| 14 | Item No 06 : Supply and fix thermoplastic cable junction box of dimension 104x104x70 mm, of make Hensel Cat No. KF0404B or its equivalent in other approved makes including one MCB single pole 6 Amp, 240 Volts, 10 kA, \"C\" curve mounted on DIN rail and connected all the incoming and outgoing terminals with lugs, complete all as specified and as directed. |
| 15 | Item No 07 : M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to GI earth strip of size 32x6 mm (upto 7.5 metre in length from earth plate) by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 40 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregateincluding excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. |
| 16 | External Water Supply |
| 17 | Item No 08 :Supply, Laying in trenches 100 mm nominal diaductile iron (DI) pressure pipe, for water mains centrifugally cast with spigot and socket ends (for push on joints), Class K-9 of standard length 5.5/6 mtr complete all as specified and as directed. |
| 18 | Item No 09 :All as per item No 08 here-in-before but 150mm dia |
| 19 | Item No 10 :All as per item No 08 here-in-before but 200mm dia |
| 20 | Item No 11 : Supply and fix DI special suitable fittings such as bens (any type, radius and angle) tapers, Tee pieces single branch , Collars, caps and plugs for DI pipe class K-7 upto 150 mm dia complete all as specified and as directed. |
| 21 | Item No 12 : Supply and fix DI special suitable fittings such as bens (any type, radius and angle) tapers, Tee pieces single branch , Collars, caps and plugs for DI pipe class K-7 upto 300 mm dia complete all as specified and as directed. |
| 22 | Item No 13 : S & F cast iron sluice valve 100 mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed. |
| 23 | Item No 14 : S & F cast iron sluice valve 150mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed. |
| 24 | Item No 15 : S & F cast iron sluice valve 200 mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed. |
| 25 | Item No 16 : M&L for construction ofold broken brick masonary Valve Chamber with PCC (1:3:6) type C1 foundation and full brick wall of size 1500x1500x1500 mm( internal dimension), 2mm thickMS cover with locking arrangement, welded on angle iron frame of size 40x40x6mm, embeded on top of valve chamber, incl. and painted with two coats of synthetic enamel paint over a coat of red-oxide primer, incl. necessary earth work etc,all as specified and directed. |
| 26 | Item No 17 : All as per item No. 16 here in before by of size of valve chambe 1000x1000x1000 mm (Internal dimentine) all as specified and as directed. |
| 27 | Item No 18 : All as per item No. 16 here in before by of size of valve chambe 900x900x900 mm (Internal dimentine) all as specified and as directed. |
