|
| 1 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed/on surface as directed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmmmodular boxessunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc includingmodular coverwith frame any size complete all as specifiedfor one Exhaust fan/ceiling fancontrolled by one, one way switch. Note :- (i) modular metal flush box with cover plate will be included in the quoted point wiring rate(ii)Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.(iii)All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.(iv) Damaged surfaces will be make good as per existing surface by applyin putty/distemper/paint after plastering etc |
| 2 | S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes all as specified and as directed. |
| 3 | Supply and fix Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 4 | Supply and fixing0-4 step -2 module modular type electronic regulators for ceiling fan 1200 mm sweep, 230 volts, 80 watts single pole complete all as specified and as directed. |
| 5 | Supply and fix exhaust fan, steel body AC single Phase. 230V, 50 Hz of size 300mm, copper wound motorsweep with 4 Nos aerodynamically designed & balanced blades, metallic finish air delivery 1850 CMH, power consumption not more than 70 Watt, noise level not more than 45 dB,1400 RPM including mounting accessoriesand framecomplete all as specified and directed.Note : Metallic louvers shutters duly anticorrosive painted will be provided at the opening of exhaust fan and rate will be included in quoted rates. |
| 6 | Supply and fix exhaust fan made of sturdy Engineering plastic body complete with gravity shutters/louvers ,suitable forvoltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm having 5/6 bladesnoise level not more than 45dB and power consumption not more than 35 W complete with mounting accessories all as specified and directed. |
| 7 | Supply and fixing ceiling fans complete with 3 blades, down rods, and accessories, suitable for 230 V, 50 Hz supply controlled by regulator, 1200 mm sweep. Min air delivery 225 CFM with service value 6.00 BEE. Five star rated , power consumption not more than 30 W with Complete copper wounded brushless direct current motor (BLDC) complete all as specified and directed. |
| 8 | M&L for making hole of suitable size for 250/300 mm sweep exhaust fan in walls and including grouting bolts, cutting chasing and plastering, painting to match with the existing surface etc.or making frame in existing metal/wooden window including cutting, welding etc, , complete all as specified and as directed. |
| 9 | Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint Complete all as specified and directed |
| 10 | Supply and fix of MS down rod for ceiling fan as per site duly painted with anti corrosive paint 15 mm bore incuding drilling holes complete all as specified and directed. |
