|
| 1 | Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs / replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction and discharge line realignment commissioning and testing in respect of centrifugal / multistage pump of capacity 75 HP, complete all as specified and directed by Engineer-in-charge.Note : (i) Loading / unloading and transportation charges shall be deemed included in the quoted rates.(ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 2 | All as per Ser item No 1.00 here in above but capacity 50 HP. |
| 3 | All as per Ser item No 1.00 here in above but capacity 25 to 30 HP. |
| 4 | S&F following parts for single / multistage pumps of capacity 75 HP as per manufacturer\"s composition of existing make of pump, complete all as specified and directed |
| 5 | Pump impeller |
| 6 | Pump shaft stainless steel shaft complete with check nut and keys |
| 7 | Tyre coupling / star coupling |
| 8 | Star / Tyre coupler made of steel |
| 9 | Gland cup |
| 10 | Shaft sleeves |
| 11 | Bearing housing |
| 12 | Neck Ring |
| 13 | Weight Ring |
| 14 | Check Nut |
| 15 | S&F following parts for single / multistage pumps of capacity 50 HP as per manufacturer\"s composition of existing make of pump, complete all as specified and directed |
| 16 | Pump impeller |
| 17 | Pump shaft stainless steel shaft complete with check nut and keys |
| 18 | Tyre coupling / star coupling |
| 19 | Star / Tyre coupler made of steel |
| 20 | Gland cup |
| 21 | Shaft sleeves |
| 22 | Bearing housing |
| 23 | Neck Ring |
| 24 | Weight Ring |
| 25 | Check Nut |
| 26 | S&F following parts for single / multistage pumps of capacity 25 to 30 HP as per manufacturer\"s composition of existing make of pump, complete all as specified and directed |
| 27 | Pump impeller |
| 28 | Pump shaft stainless steel shaft complete with check nut and keys |
| 29 | Tyre coupling / star coupling |
| 30 | Star / Tyre coupler made of steel |
| 31 | Gland cup |
| 32 | Shaft sleeves |
| 33 | Bearing housing |
| 34 | Neck Ring |
| 35 | Weight Ring |
| 36 | Check Nut |
| 37 | Lath / Mchining works of any type at workshop required for balancing of impller / for fixing of new parts to existing shfts required for proper setting and smooth functioning to achieve desired discharge of 75 HP capacity pump, complete all as specified and directed. |
| 38 | All as per Ser item No 7.00 here in above but capacity 50 HP. |
| 39 | All as per Ser item No 7.00 here in above but capacity 25 to 30 HP. |
| 40 | S&F in repairs of fully automatic star delta motor starter in sheet metal enclosure with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 75 HP conforming to IS / IEC - 60947-4-1, complete all as specified and directed. |
| 41 | All as per Ser item No 10.00 here in above but capacity 50 HP. |
| 42 | All as per Ser item No 10.00 here in above but capacity 30 HP. |
| 43 | S&F in reapirs of power contactor, 3 pole, with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1 suitable for 75 HP (100 Amp) centrifugal pump set, complete all as specified and directed. |
| 44 | S&F in reapirs of power contactor, 3 pole, with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1 suitable for 50 HP (75 Amp) centrifugal pump set, complete all as specified and directed. |
| 45 | S&F in repairs of single phase protector in starter for centrifugal pump set, complete all as specified and directed. |
| 46 | M&L for repair of 0.5 to 2 HP pumpset (including motor) by taking out from foundation, dismounting from base channels, strip opening all parts, derusting, cleaning, overhualing, etc for complete repair / replacement of spare parts such as impeller, shaft, winding, bearings, coupling, body etc. and after repair / replacement, reassembling of pumpset mounting and fixing on base channel, recoupling of suction and discharge line, realignment, commissioning and testing, complete all as specified and directed. |
| 47 | Repair / maintenance and replacement of defective parts of air compressor set of capacity 280 cum/hr such as shaft,pulley V- belt, bearing, piston ring, oil seal, bush etc , Re-greasing all grease points, tighten the nuts, bolts of air comressor set, etc and replacement with new parts, complete all as specified and directed. |
| 48 | Supply only roundup herbicide of 5 litre capacity to remove unwanted herbs and weeds at installations, complete all as specified and directed. |
| 49 | Supply only chlorine testing kit to check the chlorine at installations, complete all as specified and directed. |
| 50 | M&L for premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed. |
| 51 | S&F in repairs for following bore size GI fittings, medium grade, ISI marked all as required at site, complete all as specified and directed. |
| 52 | Elbow 15mm |
| 53 | Elbow 20mm |
| 54 | Elbow 25mm |
| 55 | Elbow 40mm |
| 56 | Elbow 50mm |
| 57 | Socket 15mm |
| 58 | Socket 20mm |
| 59 | Socket 25mm |
| 60 | Socket 40mm |
| 61 | Socket 50mm |
| 62 | Union 15mm |
| 63 | Union 20mm |
| 64 | Union 25mm |
| 65 | Union 40mm |
| 66 | Union 50mm |
| 67 | Elbow reducer 20 x 15mm |
| 68 | Elbow reducer 25 x 20mm |
| 69 | Elbow reducer 40 x 25mm |
| 70 | Socket reducer 20x15mm |
| 71 | Socket reducer 25x15mm |
| 72 | Socket reducer 25x20mm |
| 73 | Socket reducer 40x25mm |
| 74 | Socket reducer 40x20mm |
| 75 | Socket reducer 50x25mm |
| 76 | Nipple 15 x50mm |
| 77 | Nipple 15 x100mm |
| 78 | Nipple 15 x150mm |
| 79 | Nipple 20 x50mm |
| 80 | Nipple 20 x100mm |
| 81 | Nipple 20 x150mm |
| 82 | Nipple 25 x 50mm |
| 83 | Nipple 25 x 100mm |
| 84 | Nipple 25 x 150mm |
| 85 | Nipple 40 x 50mm |
| 86 | Nipple 40 x 100mm |
| 87 | Nipple 40 x 150mm |
| 88 | Nipple 50 x 50mm |
| 89 | Nipple 50 x 100mm |
| 90 | Nipple 50 x 150mm |
| 91 | Tee 15mm |
| 92 | Tee 20mm |
| 93 | Tee 25mm |
| 94 | Tee 20x15mm |
| 95 | Tee 25x20mm |
| 96 | Tee 40x15mm |
| 97 | Tee 40x20mm |
| 98 | Tee 40x25mm |
| 99 | Tee 50x25mm |
| 100 | Dead plug 15mm |
| 101 | Dead plug 20mm |
| 102 | Dead plug 25mm |
| 103 | Dead plug 40mm |
| 104 | Dead plug 50mm |
| 105 | lead |
| 106 | Spun Yarn |
| 107 | MS flange 150 mm dia |
| 108 | MS flange 100 mm dia |
| 109 | MS Flange 80 mm dia |
| 110 | MS Dead plate (Flange) 150 mm dia |
| 111 | MS Dead plate (Flange) 100 mm dia |
| 112 | MS Dead plate(Flange) 80 mm dia |
| 113 | Rubber gasket 150 mm dia |
| 114 | Rubber gasket 100 mm dia |
| 115 | Supply only alumina ferric (Grade-4) suitable for purification of drinking water solid water in the form of solid lumps / slabs from the manufacturer having valid BIS certificate as specified in table 1 of IS : 299-2012, complete all as specified and directed.Note : (i) Each consignment of alum supplied by the contractor should have a marking indicating weight of the slab and the alum supplied by the contractor shall be got testedfor each lot from Govt reputed lab. The charge for testing shall be borne by the contractor and cost of the same shall be deemed to be included in the quoted rate.The contractor shall deliver the material as per the site requirement and direction of Engineer-in-charge. Make : Swastic chemical Delhi/JK Alums & chemicals Pvt Ltd or equivalent in other approved make by E-in-C\"s Br.(ii) The material will be supplied in bulk and should have fully information on card with each lot:(a) Name & grade of material.(b) Suitable for water purification for drinking purposes written.(c) Name of manufacture and trade mark.(d) Date of manufacture.(e) Batch No. |
| 116 | Supply only calcium Hypo Chlorite (Chlorination chemical) high efficient (calcium hypo chlorite having < 60% to 70% available chlorine) calcium based in granular form and should not have sodium / Iron / Mercury or other heavy metal contaminants.Make : Puri Chlor or equivalent make approved by E-in-C\"s Br /higher HQ.Note :- (i) The contractor has to produce manufacturer\"s test certificate / reputed approved lab. (ii) The calcium based granular disinfectant shall be brought at site in sealed plastic container of appropriate capacity duly marked with date of manufacturing and batch No. |
| 117 | Supply only inorganic polymerised liquid primary coagulant for drinking water treatment with the following specifications:Appearance: Clear to slight hazy liquidOdour: OdourlessSpecific gravity: 1.3300 – 1.3500pH (30% w/v): 4.00 – 4.40Melting / Freezing point: -7 ºCEvaporation rate: 50 – 75% (water)Viscosity: < 50 cpsOral LD50: 5000 mg/kg (Rat) |
| 118 | Supply only hermetically sealed, single use polymeric sanitisation module, optimized for delivery in aqueous media via chlorine based solid oxidizing matrix, must be designed for seamless integration with both active and passive flow dosing systems, ensuring precision controlled disinfectant release into potable water. Additionally, an integrated suspension loop must enable direct stand-alone deployment without auxiliary apparatus.Key Attributes:Construction: Chemically inert thermoplastic, housing a stabilized chlorine medium for sustained disinfection.Dispersion: Hydro-actuated, hermetically sealed orifice that activates on immersion for contactless chlorine delivery.Safety: Non-contact, non-volatile design, compliant with closed-loop potable water protocols.Service Life: Dual-mode diagnostics via visual and gravimetric indicators for replacement.Dimensions: Diameter: 2.5″ ± 0.5″; Height: ≥10.0″ ± 0.5″Make: Stequa 411 AE (Declibac) or equivalent approved make. |
| 119 | S&F Stick Suspender with the following specifications:Metallic dead weight min. 4 KgCylindrical configuration with base gripSuspension length: 6 Metres to 10 MetresStick holding capacity: 5Fastening mode: Thermoplastic hookMake: Declibac or equivalent approved make |
| 120 | M&L for plain cement concrete, 1:2:4, Type B-1 (20mm graded crushed stone aggregate) as in block mass concrete below ground level all around the bore level, complete all as specified and directed. |
| 121 | M&L for cleaning of borewell of any size and depth by removing silt, mud, clay, fine sand, foreign materials and other impurities by air-lifting method, complete all as specified and directed. |
| 122 | M&L for laying PPR pipes of size 25mm bore,3.5mm thickness, PN 16 including all fittings such as elbows, Tee, socket, union, reducers, etc.including taking out / down existing GI pipe, complete all as specified and directed. |
| 123 | S&F in repairs 25mm bore dia PPR ball valves, heavy duty, screwed both ends (ISI marked),complete all as specified and directed. |
| 124 | Deduction to be made from BOQ for Schedule \"A\" Part-II (Credit Schedule from dismantling / taking down items) worth Rs 62,085.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) |
