Name of Work:- U0ik0i0“Kkgxat Eksgyyk Ubz Vkcknh Esa Jkeyhyk Esnku Ifjlj Esa Gkbzeklv Ykbzv Vf/K‘Bkiu Dk Dk;Za
Sl. No.
Item Description
1
Supply and fixing of 20 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 4mm. Top dia minimum 150 mm, bottom dia minimum 410mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8mum dia, double drum winch, including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect.( As per PWD Schedule 2024 SI no. 21.3.2)
2
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with toughend glass/UV stablized PC cover and lenses built with mandatory dirver set suitable for 170 to 200 Watt. Confirming to IP 66, IK 07 and above protection complete in all respect including labour.. (As per PWD Schedule 2024 SI No. 23.26 ) CAT-AAA with 5 year warranty.
3
Supply & laying of 25 sq.mm 3.5 core aluminium conducter pve insulated armoured served sheathed cables 1100volts grade at a depth of 750 mm below ground level over a chushion 75 mm thick sand all around and protected with brunt bricks on sides and top. on surface the cable run shall be fixed on M.S. clamp etc of suitable soze or as directed by Engineer in Charge complete in all respects including exacavation anf reflling. The armouring of the cable shall be properlly connected with the eirth cunductor by clamp etc. ( As per PWD Schedule 2024 SI no. 20.1.10)
4
Supply and Laying of 6\"/4\"/2.5” PVC/HDPE pipe in which the Aluminium Conductor Cable shall be laid. (Nonschedule Item - As per Market Rate)
5
S/L of 2.5 sq. mm x 3 core copper cabic under pole for connection of LED Floodlight to the bottom plate of pole. [( As per PWD Schedule 2018 SI No- 289(P)]
6
Supply and fixing of automatic street light cubical control panel painted with anticorrosive and acid proof paint H.R.C fuse insolating switch material complete in all respects . ( As per PWD Schedule 2018 SI No.807 F (ii) )
7
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. (As per PWD Schedule 2018 Sl.No. 725(B))
8
Supply & Fixing of single unit LED aviation obstruction light complte with transformer and LED spiral etc complete in all respect. (As per PWD Schedule 2018 Sl.No. 409)
9
GST @ 18% Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
