|
| 1 | Supply and laying of Al conductor 33 KV (E) XLPE cross linked polyethlene) over all served cable with flat galvanised steel strip armouring at existing trench/hume pipe. (i) 300Sqmm 3 core PSR |
| 2 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in existing cable trench with tying of cable in support along with accessories complete in all respect PSR |
| 3 | Supply/fabrication and Erection of 33 KV Double Pole Cable Exposure D/C complete with 410SP-55 11 mtr long ST Pole-2 Nos, 33 kv pin insulator with pin and nut-9 nos, top channel 100x50 mm, MS angle 65x65x6mm, LT XLPE cab le AL. 1x400sqmm-18mtr, danger board with clamp-2 nos, barbed wire, pole fencing-2 nos, aluminium lug- 12 nos, holding MS clamps-12 nos, nut bolts etc icluding painting of pole with aluminium paint over red oxide primer all complete direction of E/Ic. as per UPPCL specification PSR |
| 4 | Supply and fixing of 33 KV stright through heat shrinkable cable jointing kit 300 Sqmm complete with labour T&P etc as per direction of E/Ic. PSR |
| 5 | Supply and fixing of 3 x 300 sqmm 33 KV Out Door type End Termination heat shrinkable cable jointing kit complete with labour T&P etc as per UPPCL approved make as per direction of E/Ic. PSR |
| 6 | Supply of following type high conductivity aluminum strand compacted circular conductor XLP (E) armoured 11KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment 185 Sqmm 3 core XLPE cable PSR |
| 7 | Supply and fixing of 11 KV stright through heat shrinkable cable jointing kit 3x185 Sqmm complete with labour T&P etc PSR |
| 8 | Supply and fixing of 11 KV out door heat shrinkable cable jointing kit 3x185 Sqmm complete with labour T&P etc PSR |
| 9 | Supply/fabrication and Erection of 11 KV END type Double Pole on Steel tubler pole SP-55 11 mtr. long galonished bottom complete with 410 SP-55 11 mtr long ST Pole-2 Nos, 11 kv pin insulator with pin and nut, top channel 100x50 mm, MS angle 65x65x6mm, danger board with clamp-2 nos, barbed wire, pole fencing, holding MS clamps-12 nos, nut bolts etc icluding painting of pole with aluminium paint over red oxide primer all complete as per UPPCL specification. PSR |
| 10 | Supply/fabrication and Erection of 11 KV Exposer type Double Pole on Steel tubler pole SP-55 11 mtr. long galonished bottom complete with 410 SP-55 11 mtr long ST Pole-2 Nos, 11 kv pin insulator with pin and nut-, top channel 100x50 mm, MS angle 65x65x6mm, danger board with clamp-2 nos, barbed wire, pole fencing, holding MS clamps-12 nos, nut bolts etc icluding painting of pole with aluminium paint over red oxide primer all complete as per UPPCL specification. PSR |
| 11 | Supply/fabrication and Erection of 11 KV S/S-type Double Pole on Steel tubler pole SP-55 11 mtr. long galonished bottom complete with 410 SP-55 11 mtr long ST Pole-2 Nos, 11 kv pin insulator with pin and nut-, top channel 100x50 mm, MS angle 65x65x6mm, danger board with clamp-2 nos, barbed wire, pole fencing, holding MS clamps-12 nos, nut bolts etc icluding painting of pole with aluminium paint over red oxide primer all complete as per UPPCL specification. PSR |
| 12 | S/I and testing and commisning of 11/433 V distribution transformer 50 HZ onan type star delta etc as per specification and UPPCL rules complete in all respect for following capacity. 63 kva |
| 13 | Supply 100 KVA 11/0.4 KVA Transformer with all accessory propor complition of work as per direction of E/I PSR |
| 14 | Supply & fixing steel tubular pole 9 Metre long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 15 | S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. A.R. Bond No.87/CE/EE(E/M)2021, Dated 09-11-2021 PSR |
| 16 | Supply and Eraction of ABC Conductor (3x120+1x5+1x16) Proper complition of work as per direction of E/L. PSR |
| 17 | S/F of pearcing connector suitable for above ABC complite in all respects As per PCL specification PSR |
| 18 | S/F of dead end clamp for above ABC complite in all respects As per PCL specification PSR |
| 19 | S/F of suspension clamp for above ABC complite in all respects as per PCL specification PSR |
| 20 | S/F of Eye hook for suspension clamp for above ABC complite in all respects as per PCL specification. PSR |
| 21 | Supply & erection of \"D\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . PSR |
| 22 | S/F of 3 Phase 10 ways distribution consumer board for Arial Bunch Conductor complite with fixed on pole all complite as per UPPCL specification or as per direction of E/Ic. PSR |
| 23 | Supply and laying of Al conductor 33 KV (E) XLPE cross linked polyethlene) over all served cable with flat galvanised steel strip armouring at a dept of 1.0M below ground level over a cushion of 75mm thick sand bed alroundand protect with bricks on sides and top surface 300x3x4 mm red stone the cable run shall be fixed on M.S clamp etc of suitable size and crossing the road cable shall run through 150mm dia hume pipe proper completion of work. (i) 300Sqmm 3 core PSR |
| 24 | laying of 33/11 kv armoured XLPE cable with HDD Drilling method complete with labour T&P etc all as per direction. PSR |
| 25 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 185 sq. mm PSR |
| 26 | Construction of Solid B/W Transformer Plinth of size 1.5mx1.5mx1.25m above G.L.The top of the plinth shall be of RCC 15 cm thick with material & labour all complete as per direction of E/Ic. PSR |
| 27 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect PSR |
| 28 | Supply fabrication and erection of 33 KV / 11 KV Cable Hoisting with 150 mm dia MS/GI pipe, holding clamp, nut bolt etc as required all complete as per UPPCL norms (Shedule - 33) PSR |
| 29 | Supply and Installation of 250 KVA 11/0.4 KVA Transformer propor complition of work as per direction of E/I PSR |
| 30 | 11 KV high pressure Testing PSR |
| 31 | Dismantling Charges of pole structure with accessory, Transformer, conductor etc and carriage of receive back material from site to store ESC PSR |
| 32 | S/F of HDPE pipes (upto Pn 6kg pressure Rating material Grade PE 80, Nominal Dia (OD) 160mm 9.1mm thicknes for cable Complete in all respect as per relevants IS Technical Specification. 110 sq.mm dia. PSR Please Enable Macros to View BoQ information |
