Name of Work:- Internal Electrification In Apf 12×88 And Lighting Arrangements-01 Nos At Nmy Tilhar
Sl. No.
Item Description
1
Supply and wiring of submain with two number 2.5sqmm FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20mm dia heavy guage rigid steel conduit on surface , with one number 14 SWG copper earth continuity wire etc, complete in all respect.
2
Supply and Fixing of 6 Amp to 32 Amp SPMCB (10 KA) C curve.. CAT A
3
Supply and Fixing of 6 Amp to 32 Amp DPMCB (10 KA) C curve.. CAT A
4
Supply and Fixing of surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by engineer-in-charge. CAT-A
5
S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 10sqmm 2 core
6
S/F of recess/surface mounting round 24 to 32 watt LED down lighter having powder coated die cast aluminium housing with extended heat sink, diffuser/reflector and driver set complete in all respects. CAT AAA
7
S/L of B class heavy 100mm dia GI Pipe on pole or road crossing complete in all respects
8
S/F of LED Street Light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 110 to 130 watt confirming to IP 66 Protection having company logo engraved complete in all respects including labour Cat AAA, with 5 year warranty.
9
S/fixing of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T and P other material required for proper completion of the work as directed at site.
10
S/B of safe earthing electrode T-19 (hot dip galvanized), length up to 2000mm, outer pipe 50mm, inner pipe 25mm, terminal dia 12mm, outer GI pipe of 16swg and inner pipe of 12swg with hot dip galvanization up to 100micron filled with crytalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of earth lead will be extra) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
