|
| 1 | 1) Providing double scaffolding arrangements for attending repair / improvement works by using steel pipes of required diameter, including providing necessary Horizontal and vertical members, tie members, bracings etc., all round and platforms at various level adquate strength including removing the scaffolding with platform after completion of repair/improvement works all as per relevant specification and all as directed at site including all labour, materials, tools, equipments, coir, transport, fuel, etc., complete. Note:1) Scaffolding will be measured only one time for entire repair/improvements (length x height.) 2)75% of the payment may be released after erecting of scaffolding in all respects. 3)25% of the balance payment will be released only after completion of repair/improvement works and removal of scaffolding. 4) If casurina poles used for scaffolding the bottom and top dia of casurina poles are of 100mm and 50mm respectively. |
| 2 | 2).Cutting and removing the Fallen/Dead/unwanted trees of the girth, tree branches on the compound wall/building by using cutting machine/ manual into different cut pieces for easy handling, removing the all cut pieces and leaves etc., without damaging the near by strtuctureand including collecting, transportinganddumpingthe same wherever required all as directed at site of work including all labour,tools, tackles, equipments, fuel, transport, scaffolding, etc. Complete. Note : For payment purpose the actual number of trees will be taken into account irrespective of its branches.2a) Beyond 30cm girth upto and including 60cm girth |
| 3 | 2b) Beyond 60cm girth upto and including 120 cm girth |
| 4 | 3).Dismantling and removing the existing wornout MS grills, grill gate etc., and handing over the same to departmental stores/RSO yard within a lead of 3km and all as per relevant specification and as directed at site of work including all labour, tools, equipments, transport, fuel, tackles, scaffolding etc., complete. |
| 5 | 4) Dismantling/cutting the existing RCC members including stacking the steel without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores and wherever required including collecting and depositing the Debris in Ground level with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 6 | 5)Cutting the existingprojected reinforcemet bars protrudingfrom thecolumn, beam, pedestal, Verandah drops, O.H. Tank,lintels and sunshade etc,including cutting, transporting the dismantled materials and all as per relevant specification and as directed at site of work including all labour, tools, equipments, transport, fuel, tackles, scaffolding etc., complete. |
| 7 | 6)Dismantling the existingdamaged brickwork in Cement Mortar to the required height/areawherever requiredwithoutdamaging the nearby structures including collecting and depositing the debris within a lead of 50m for disposal all as per relevant specification and as directed at site of workincluding all labour, tools, tackles, equipments, transport, fuel, scaffoldingetc., complete. |
| 8 | 7a).Dismantling and removing theexisting damagedtiles in Cement Mortar and bringing down the debris to the ground level and wherever required without damaging the nearby structures including collecting and depositing within a lead of 50m all as specified andas directed, including scaffolding , all labour, tools, materials, etc., complete. |
| 9 | 7b).Dismantling and removing theexisting damaged kitchentiles in Cement Mortar and bringing down the debris to the ground level and wherever required without damaging the nearby structures including collecting and depositing within a lead of 50m all as specified andas directed, including scaffolding , all labour, tools, materials, etc., complete. |
| 10 | 8)Dismantling and removing the existing damaged GI/PVC rainwater/sewer pipe above Ground Level without damaging the nearby structures, wherever required and transporting and handing over the serviceable materials to the departmental stores/RSO yard and stacking the debris if any within a lead of 50m fordisposal all as per relevant specification and as directed at site including all labour, scaffolding, tools, equipments, transport, fuel etc., complete. |
| 11 | 9).Dismantling and removing the existing worn-out wooden/PVC doors/FRP door of arealess than3 Sqmetc.,without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 12 | 10) Dismantling and removing the existing damaged European type water closet with trap and all accessories without damaging the nearby structures and conveying and handing over the serviceable materials, if any, to the department stores and bringing the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site including all labour, tools, equipments,transport, fuel, etc., complete. |
| 13 | 11) Dismantling and removing the existing damaged wash hand basin with all accessories without damaging the nearby structure, conveying and handing over the serviceable materials, if any, to the department stores and bringing the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site including all labour, tools, equipments, scaffolding, transport, fuel, etc., complete. |
| 14 | 12)Dismantlingand removing the existing damaged dadooing/plastering from wall set in Cement mortar to the required thick wherever necessary without damaging the nearby structures, including collecting anddepositing the debris within a lead of 50m for disposal allasper relevant specification andasdirected at site of work including all labour, tools, tackles, equipments, sacffolding, transport, fuel, etc, complete. |
| 15 | 13) Providing Brick work with common burnt clay (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:5 (1 cement : 5 crushed stone sand) with all necessary grooves for providing plastering complete and wherever required all as directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 16 | 14) Providing Half Brick work with common burnt clay (non modular) bricks of class designation 7.5in CM 1:4 (1 cement : 4 crushed stone sand above plinth levelup to floor V level andwherever requiredallas directed at site, including cement, all labour, materials, scafolding, tools, curing, equipments,fueletc., complete. |
| 17 | 15) Preparing the surfaces of existing walls and plastering in cement mortar 1:5 (1cement : 5 crushed stone sand), 12mm thick wherever required to the required finish, curing etc., all as directed at site including cement, all materials, labour, tools, equipments, scaffolding etc., complete. |
| 18 | 16)Providing and layingVITRIFIED TILES for flooringwith good quality (Jhonson/ Kajaria/Nitco or other approved brands) (Double charge or equivalent)of size 600mm x 600mmnominal thickness or nearest size as available in the market confirming to IS 15622 of approved make set in cement mortar 1:4 (1cement : 4 crushed stone sand) 20mm average thick, with required slope and fixed with neat cement slurry and joints neatly pointed with polymer based groute mix (Bal Endrua on Fevimate or Equivalent) white cement added with pigment to match thecolour of the tiles, curing all as directed at site of work including cement and all other materials, labour, tools, equipments, etc., complete. |
| 19 | 17) Supplying, fabricating and placing in positionHYSD (Fe 415/500 grade) TMT steel barsconforming to IS 1786as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification and as directed,including all materials, labour, tools, equipment, transport, fuel, etc., complete.Note:1.The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for payment purpose.2.The contractor will be allowed to use Fe500 Grade TMT steel bar without claiming any extra cost. |
| 20 | 18)Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge and as directed,including all materials, labour, tools, equipment, transport, fuel, etc., complete.. |
| 21 | 19) Providing and laying Ceramic glazed floor tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands) or nearest sizeas available in the market conforming to IS : 15622 of approved colour, set in cement mortar 1:4 (1 cement : 4 crushed stone sand),20mm average thick, with required slope and fixed with neat cement slurry and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing, all as directed at site of work including cement and other materials, labour, tools, equipments,etc., complete. |
| 22 | 20)Providing wall dadoing with first quality ceramic tiles (Plain) (Jhonson/Kajaria/Nitco or other approved brands)of size 300X450 or nearest size as available in the marketconforming to IS : 15622 and approved colour and shade set in cement mortar 1:3 (1cement: 3 ccrushed stone sand) 12mm thick and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work including cement and all other materials, labour, tools, equpiments, etc., complete. |
| 23 | 21)Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.-Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent includingall materials, labour, plants, tools, equipment, machinery, fuel etc., complete. |
| 24 | 22 ) Providing and fixing in position country wood (PADAUK or equivalent) wrought main frames of finished size 95mm x 58mm for doors with necessary M.S. hold fasts / clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C. 1:3:6 (1 cement : 3 crushed stone sand: 6 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions, curing and applying two coats of oil type wood preservative of approved brand and manufacture, complete abutting against masonry/concreteall as per relevant specification and as directed at site including all labour, materials, tools, equipments, etc., complete |
| 25 | 23)Providing and fixing in position second class teak wood single leaf fully panelled shutters for doors with 32mm thick styles including top rail, bottom rail, lock rail etc., with panels of 16mm thick (as per Chennai Port Trust Civil Engineering Works Manual drawing Amended) all as per relevant specifications and as directed at site including all materials, labour, tools, equipments etc., complete.Note:Necessary fixtures like butt hinges, tower bolts, etc.,will be paid under relevant item of this schedule. |
| 26 | 24)Providing and fixing factory made panel PVC door shutter of 30mm tk consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness,70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 27 | 25a)Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) Varmora brand with seat and lid ,10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required in sound working condition, and as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 28 | 25b)Providing and fixing ofWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restswith 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required all as per relevant specification and as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 29 | 26)Providing and fixing White Vitreous China Flat back wash basin of size 550x 400 mm with single 15 mm C.P. brass pillar tapwith C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requiredand as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 30 | 27) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Trubore/Finolex or equivalent) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing, including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for External work, all required accessories like tees, bends, couplings, elbows, reducers, unions,etc., including punching the masonry/concrete wherever required including all labour, materials, tools, equipments, scaffolding etc., complete.27a).20mm dia |
| 31 | 27b) 25mm dia |
| 32 | 28) Providing, fixing and laying in position rigid unplasticised PVC pipes for waste water and sewage line on the floors (Finolex or Truebore or Varun or equivalent) capable of withstanding a pressure of 6Kgf/Sq.cm including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives, making the joints water tight and connections to floor traps, gully traps, manhole etc., all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete.28 a) 75 mm dia |
| 33 | 28 b) 110 mm dia |
| 34 | 29) Supplying thesanitary fittings(Metro, Jaquar or equivalent) C.P fittings intoilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete.29 a) Towel Rod 600mm long |
| 35 | 29b)CP Health facuet with tube |
| 36 | 29c)CP 2way 15mm bib cockwith handle |
| 37 | 29d) CP 2 way stop cock conceled 15 mm |
| 38 | 29e)CP brass pillar cock 15mm |
| 39 | 29f)CP shower arm with flange-300mm |
| 40 | 29g)CP Over head shower |
| 41 | 29h)CP angle valve 15 mm dia |
| 42 | 29i)CP long body bip cock 15mm dia |
| 43 | 30) Providing and fixing600x450mm bevelled edge mirror of superior glass ( of approved Quality) (Saint gobain or equivalent)with 6mm ard board ground fixed to wooden cleats with C.P brass screws and washers complete.all as directed at site of work all labour, materials, tools, equipments etc., |
| 44 | 31) Supplying and fixing anodised aluminiumfittings withconfirming to Bureau of Indian Standard specification (Minimum anodise coating of AC 10 grade)in doors/windows etc., with necessary screws, etc.,allas directedat site of work including all materials, labour, tools, equipments, etc. complete.31 a) Butt hinges -100 mm |
| 45 | 31b)Butt hinges 125 mm |
| 46 | 31c)Aluminium Aldrop 250 x 12 mm |
| 47 | 31d)Aluminium tower bolts 75 x 10 mm |
| 48 | 31e)Aluminium tower bolts 100 x 10 mm |
| 49 | 31f)Aluminium tower bolts 200 x 10 mm |
| 50 | 31g)SS Hooks & Eyes 50 mm long |
| 51 | 31h)Brass Hooks & Eyes 250 mm long |
| 52 | 32) Preparing theexisting inner wall surfaces and applying twocoat of premium Acrylic emulsion paint (Asian, nippon, burgeror equivalent) of approved colour and shade to give an even shade, finish all as perspecification and as directed at site of work including all labour, materials, scaffolding, brushes,etc., complete. |
| 53 | 33) Preparing the surface of existing walls applying two coats ofweathershieldMax over one coat of weather shield primer (Asian, nippon, burgeror equivalent)of approved colour and shade to give an even shade, finish all as perspecification and as directed at site of work including all materials, labour, scaffolding, brushes, tools, equipments etc., complete. |
| 54 | 34) Preparing the surfaces of old wooden members and painting with two coats of synthetic enamel paint colourof approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 55 | 35) Preparing the surfaces of new wooden members and painting with two coats of synthetic enamel paint colour(Asian, nippon, burgeror equivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete.Note: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 56 | 36) Preparing the surfaces of old steel members and painting with two coats of synthetic enamel paint(Asian, nippon, burgeror equivalent)of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 57 | 37)Preparing the surfaces of new steel members and painting with two coats of synthetic enamel paint (Asian, nippon, burgeror equivalent) over one coat of primerof approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete.Note: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 58 | 38 a) Polishing the existing mosaic tiled flooring by thoroughly scrubbing and stripping using TASKI stripper R-20 solution or similar chemical with scrubbing pad, until old wax, grease and muddy layers on the floors are stripped off completely and the floor is rinsed thoroughly with water by TASKI ergo disc machine and soft pad, including sucking the soiled solution with TASKI vacumat, allowing the floor to dry completely and applying two coats of TASKIPlaza Plusor similar chemical evenly with an applicator tool onto the floor and applying two coats of undiluted TASKI Completeor similar chemical evenly with an applicator tool and finishing the joints neat, all as directed at site of work includingall labour, materials, tools, equipments, chemicals, transport, fuel, etc., complete. |
| 59 | 38 b) Providing mosaic Skirting polishing with wax finishing from Ground floor upto 5th floor level |
| 60 | 39) Supplying and fixing ofinsects preventing PVC netlon mesh consisting of 1.8mm X1.8mm aperture for size (Approx) to the window openings andventilators etc., and wherever required after removing the old damaged mesh including providing 25mm wide hook fastenersstabled continuously on all the four sides of the existing wooden frames and loop fasteners tailored on the edges of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffolding etc., complete. |
| 61 | 40) Providing and laying plain cement concrete of mix 1:1.5:3 (1 Cement: 1.5 crushed stone sand : 3 hard granite graded stone aggregate of 20 mm nominal size) in volumetric proportionsto a required thicknessfor patch concrete and wherever required all as per relevant specification and as directed at site including shuttering, mixing, transporting, vibrating, placing, ramming, consolidating, curing etc., including all materials, cement, labour, tools, plants, equipments,etc., complete |
| 62 | 41) Collecting, loading, transporting, Debris/ excess earth etc., and any other unwanted materials from the road sides and yards in different location in outer Harbour area, dumping the same in the low lying areas ofthe port premises with in lead of 3 Kms and leveling the unloaded materials, etc., all as directed at site of work includingall labour, tools, plants, equipments, fuel, etc. complete.Note : 1. The contator shall engage tractor wherever required by department 2. The contractor has to make his own arrangements to collet all the available materials at sides of roads and around buildingsand directed at site.3. The collected heaped materials has to be transported without any spillage.4. Necessary trip sheet in triplicate in the trust format shall be maintained by the contractor without claiming any extra cost.5. Cubic contents will be arrived based on lorry measurements for the quantity transported.6. 8% voids to be deduct for manure, 20% voids to be deduct for surplus earth and no voids deduction for debris.41 a)Earth |
| 63 | 41b) Debris |
| 64 | Schedule:B1) Providing semi Modular Kitchen works - Wall cabinet - 2 shutter soft close M09,M10 cabinet material/ colour pre lam Hydroguard plus HDF/ Frosty white,shutter finish & core /clour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size of 1500x330x660mm and including accessories removable shelf shaft - 2 nos |
| 65 | 2) Wall cabinet - 2 shutter soft close M09,M10 cabinet material /Colour prelamHydroguard Plus HDF /Frosty white,shutter finish & core /clour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size 600x 330x 600 mm and including accessories removable shelf soft close 2 numbers everyday dish drainer set -01 |
| 66 | 3) Semi - Modular base frame and shutter regular- 100mm skirting soft close M01 Cupboard material/ Frosty white,shutter finish & core /clour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size 730x100x850 mm for sink below portion. |
| 67 | 4) Semi - Modular base 1 drawer grain pullout regualr M02 Cupboard material/ Frosty white,shutter finish & core /clour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size 600x560x750mm and including accessories Tandom drawer normal grey -500 mm , 30kg soft close 1 number, SP-PVC cutlery insert 600mm soft close 1 number, Tandom drawer pot and pan - grey - 500mm - 30 kg soft close 1 number spitze - plate basket insert soft close 1 number ( Brand Ebco/Hettich/Sleek) |
| 68 | 5) Semi - Modular base bottle pull out regular shutter extension soft close M03 Cupboard material/ Frosty white,shutter finish & core /colour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size200x 560x750mm including accessories -1 number ( Brand Ebco/Hettich/Sleek) |
| 69 | 6) Semi - Modular base 2 drawer regular M04Cabinet material /Color Prelam Hydro guardplus / Frosty white,shutter finish & core /clour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size 900x 560x750mmincluding accessories |
| 70 | 7) Semi - Modular base magic corner - regualr extension soft close M03 Cupboard material/ Frosty white,shutter finish & core /colour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size 1030 x 560x750mm and including accessories - 1 number ( Brand Ebco/Hettich/Sleek) |
| 71 | 8) Semi - Modular base frame and shutter and inside removable self regular - 100 mm skirting soft close M01 Cupboard material/ colour prelam Hydroguard plusHDF/ Frosty white,shutter finish & core /colour prelam Hydroguard plusHDF wood grains suede /Prelam Hydro guard plus HDF of size950 x700mm for sink below portion |
| 72 | 9) PVC skirting M1 size of 4000x 100 mm kitchen base unit and cubboard shutters bottom |
| 73 | 10) Faber hood Ace pro in 3D HC PB FL BK 60 cm wall mounted chimney of Faber product code APP- 0000-000806-000. Including duct pipe and installation charges etc., Complete. |
| 74 | 11) Puncture hole for gas piping on kitchen counter top 1 unit |
| 75 | 12) Core cutting 6\" dia for 1 unit |
