|
| 1 | Supplying and laying of one number ISI marked PVC Insulated and PVC sheathed / XLPE Aluminium armoured power cable of 1.1 KV grade of following size on surface as required. complete as directed by the Engineer-in-charge. |
| 2 | 3x6 sq.mm |
| 3 | Providing and fixing Junction Box Fiber Reinforced Plastic material IP-65 Waterproof Electrical perfect for exiting pole /wall outdoor electrical installations. Complete as required. |
| 4 | Providing and fixing Mounting Arm Solidly-built Steel housing, excellent corrosion resistant pipe bracket for Street light. including 150mm dia Stainless Steel U-bolt clamp10 mm thick. etc. complete as required. |
| 5 | Supplying,Installation,Testing & CommissioningofFloodLight,powdercoatedpressurediecastaluminium(Systemlumen efficacy ≥120 and <135lm/Watt). with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95,IP-66,IK-10,CRI>70,undervoltageandovervoltageprotection, EMI-EMCasper CISPR-15,lenses for beam angle 30 deg-120deg as per the requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained tilllife ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K (AsperANSIBin), SDCM(Standard Deviation Colour Matching) <5,Maximumpowerconsumptionshouldnotmore than the specified rating and Fixture shall be of relevant BIS standard completeinallrespecti/c external connectionswith1.5sq.mmFRLS/HFFR, PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. LM79 & LM80 Test reportandalltestingrequiredforLED fixtures as per BISshall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkof aluminium housing such that LED junction temperature shall not rise above 90°C).(Product shall be got approved by E-in-charge before supply that it fulfils the specification).warranty certificate shall be submitted. |
| 6 | 50 watt |
| 7 | Supplying,installation,Testing&CommissioningofStreetlightLEDfixture powdercoatedpressurediecastaluminiumbody (System lumen efficacy ≥105 <120 lm/Watt)withdriver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5KVL,N,EasperIEC61000-4-5, Driverefficiency >85%,THD< 10%asperIEC 61000-3-2,P. F.≥0.95,IP-66,IK-10,CRI>70,undervoltageandovervoltageprotection,EMIEMCAsper CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road andsuitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry)ofminimum 50000BurningHourswith70%ofinitial Lumenmaintained tilllife ends as per LM80 extrapolation IES TM-21-11 report,CCT 3000°K (Asper ANSIBin),SDCM (Standard Deviation Colour Matching) <5,Maximumpowerconsumption should not more than the specified rating and Fixture shall be of relevant BIS standardcomplete inallrespecti/cexternal connectionswith1.5sq.mmFRLS/HFFR,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120lm/Watt output .LM79 & LM80 Test report andalltestingrequiredforLED fixtures as per BISshall be submitted.Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkof aluminiumhousing such that LED junction temperature shall not rise above 90°C).(Product shall be got approved by E-in-charge before supply that it fulfils the specification).warranty certificate shall be submitted. |
| 8 | 30 watt |
