|
| 1 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Changez Khani |
| 2 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 3 | P/F of 12mm thick plywood inlcuding fixing and carriages all job complete |
| 4 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area of 3 sqm. and below |
| 6 | Providing and fixing of Ornamental Pinjara work (wooden as per approved design of First class Kailwood including frame work of 1st class kail wood in 50*12mm beading inlcuding polishing with two or more coats |
| 7 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not lessthan 12.50 kg / sqm) |
| 8 | Providing color coated Tile type Profile sheet roofing including vertical /curved surfaced with polymer coated J or L hooks , bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface ) excluding the cost of purlins, rafters, and trusses and including cutting to size and shape wherever required 0.5mm |
| 9 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m |
| 10 | Providing and fixing of ornamental cornice (75x75mm) including all attachments complete job ( First Class Kail Wood0 |
| 11 | Providing and fixing ornamental eaves boarding 2nd class Deodar Wood 250x32 mm (nominal Size0 |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First Class deodar wood 30mm |
| 13 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Decorative ply wood both side decorative veneer (type 1) conformingto IS 1328 BWR type |
| 14 | Fixing and erection of wooden ornamental ballusters 6\" dia to Stairs including (150x75mm) chamfered ornamental bottom and top rail (ornamental Deodar Wood) |
| 15 | Providing and fixing bright finished brass handles with screws etc. complete :125 mm |
| 16 | 100 mm |
| 17 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 150x10 mm |
| 18 | 100x10 mm |
| 19 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type) |
| 20 | 100x85x5.5 mm (heavy type) |
| 21 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. |
| 22 | Providing wood work in truss work fixed in position with hold fast lugs or with dash fasteners or required dia and length KD wood |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
| 24 | Supplying, fitting and fixing 8mm thick AC4 Grade Waterproof Laminated woodenFlooring Work including cornice of required size with plank size not less than 1218mmx 193mm) mm (with unilin/tongue-groove locking arrangement) having 0.2mm thicktop abrasive layer over a decorative layer followed by a High-density fibreboard (HDF)having density > 850 kgJrn3 substrate core over a resin saturated backing layer andinstalling through unilin or tongue- groove system (having locking strength not less than1000 kg/m) over a 2 mm thick underlayer polyurethane foam on polythene sheet 250microns, over a smooth, flat, hard subfloor free from moisture (<8%), grease etc,complete in all respect with requisite accessories like end profile, transition profile,reducer T profile etc. wherever required and preparation of base including all otherincidental works as per direction & satisfaction of Engineer in charge |
| 25 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.A)PN-16 pipe, 16mm OD(SDR-7.4) |
| 26 | B)PN-16 pipe , 20mm OD(SDR-7.4) |
| 27 | Providing and fixing PPR Unions PPR Union 20mm |
| 28 | PPR Union 25mm |
| 29 | Providing and fixing ball valve 20 mm PPR of approved make |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 31 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 32 | Providing and fixing towel rail CP brass 750x20 mm together with a pair of CP brass brackets to fit the size of towel rail all complet Job |
| 33 | Wiring for lighting points/fan points/exhaust fan points/call bell points with 2x1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch ,modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent make ) including the cost of conduit /channel/bends /bulbs/6 AMP 5 Pole MCB/10 AMP DP MCB, 2 way DB for housing MCB and Hylief sheet with wooden box recessed in walls with accessories all complete as per the directions of EIC |
| 34 | P/F heating plug points (15/16A heating points) with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mmFRLS PVC insulated copper conductor single core cable for loopearthing as required |
| 35 | Philips 18-watt Round Star Surface | Surface LED Downlightfor Ceiling, Natural White(Pack of 1) |
| 36 | Havells Swing High Speed 300mm Wall Fan (Off White) Please Enable Macros to View BoQ information |
