|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar complete. |
| 2 | Roughning of old unservicable PCC floor surface by picking, chipping and wire brush sweeping clean and washing down with water to remove dust outside to make it suitable for laying floor tile complete |
| 3 | M&L fornon skid coloured ceramic tile 7 to 8mm thick area of each tile joint free exceeding 0.11sqm but not exceeding 0.18sqm, as in floors etc set over and incl high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout of pigment matching to tile color over & incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete (Tile pattern and decoration shall be as directed & suggested) |
| 4 | M&L fornon skid colour ceramic tile 7 to 8mm thick area of each tile joint free exceeding 0.11sqm but not exceeding 0.18sqm, as in skirting etc set over and including high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar ro manufactured by somani ezy grout of pigment matching to tile color over & including backing coat of screed bed or bedding layer of mortar 10 mm thick for fixing tiles withCM 1:4 complete (Tile pattern and decoration shall be as directed & suggested) |
| 5 | M&L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout of pigment matching to tile color including rendering for screed bed on vertical surface of wall or concrete surfaces 10mm thk in CM 1:4 to receive wall tiles complete (Tile pattern and decoration shall be as directed & suggested). |
| 6 | M&L for 16 to 18 mm thick machine cut green marble stone as in floor, steps (in single piece), cooking platform, cills of window etc laid over & incl 15 mm thick cement screed in CM 1:4 and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 7 | M&L for machine cut kota stone slab flooring 20 - 25mm thick set over and including high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout or equivalnet of pigment matching to tile color over & incl screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 complete |
| 8 | M&L for machine cut kota stone slab20 - 25mm thick in skirting, riseretc set over and including high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout of pigment matching to tile color over & including rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles complete. |
| 9 | Demolition of reinforced cement concrete as in Roofs,floors(otherthan ground floors), beams, staircases, landing, chajjas and similar suspended work complete |
| 10 | M&L for plain Cement concrete (PCC) type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work complete. |
| 11 | Taking down cement plaster on brick/concrete surface including scrubbing down with water etc. complete |
| 12 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, complete |
| 13 | M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 complete |
| 14 | M&Lbrickwork with sub class ‘B’ bricks straight or curved to any radius in half brick thick walls builtin CM 1:4 complete |
| 15 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces (Internal) of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete |
| 16 | M&L Rendering in two layer on other than fair faces of brick work or concrete surfaces (External) of wall 5 mm thick in CM 1:4 mixed with WPC@ 3% by wt of cement and to be finished even and smooth without using extra cement over 10 mm thick rendering incement mortar 1:6 (WPC will be measured and paid separately) complete. |
| 17 | M&L for Rendering 10 mm thick onfair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:4 for finished even and smooth (without using extra cement) complete |
| 18 | Supply only Internal water proofing compound complete. |
| 19 | M&L for preparingnew plastered surfaces of wall and applying two coats of oil bound distamper over and includinga coat of 1 to 2mm average 1.5mm thick wall care putty and one coat of primer complete. |
| 20 | M&L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distamper over & incl a coat of 1 to 2mm average 1.5mm thick wall care putty and one coat of primer complete. |
| 21 | M&L for preparation of newplasteredsurfaces and applying three coats of white wash matching to existing of wall surface complete. |
| 22 | M&L for preparation of newly plastered surfaces of wall & ceiling of exposed surfaces and applying two coats of Weather proof Exterior paint acrylic finish over a coat of alkali resistant primer complete |
| 23 | M&L for complete removal of old existing treatment by scrapping and or rubbing of walls/ceilings of roof projection and chajjas etc. and applying two coats of Weather proof Exterior paint acrylic finish over a coat of alkali resitant primer complete |
| 24 | M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete. |
| 25 | M&L for preparing old plastered surfaces of ceiling and applying one coat of white wash on ceiling to match the existing surfaces complete. |
| 26 | Taking down chowkats or frame exc 1.5 Sq m but n.exc 4.00 Sq m each and refixing in the same opening complete. |
| 27 | Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each complete |
| 28 | Refixing of door shutter exc. 1 Sqm and n.exc. 2 Sqm each in same opening complete. |
| 29 | M&L forfactory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved complete. |
| 30 | S&F factory made 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut, mitered andmoulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete. |
| 31 | S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete |
| 32 | S&F of Powder coated aluminium window/ventilator shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws and grill etc as per manufactures instruction & trade practice complete. |
| 33 | S&F 4.00mm thick sheet glass, selected ordinary quality and glazing with rubber beading or with glazing clips complete. |
| 34 | S&F 4.00mm thick figuredglass, pin head typeand glazing with rubber beading or with glazing clips complete. |
| 35 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete. |
| 36 | S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolt, if required hooks(stay), heavy for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps hold fasts, wall ties, hooks for hanging fans, plain angles cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 310-O or Fe 410-O complete |
| 37 | M&L plain Cement concrete (PCC) type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc. complete |
| 38 | M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete. |
| 39 | M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete. |
| 40 | S&F200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete |
| 41 | S&F in repairs 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete |
| 42 | S&F 150 mm size extruded aluminium alloy handles, febricated type anodised complete |
| 43 | S&Faluminium anodisedHasp and staple, safety type of size 75 mm with mild steel hinge pin including bolt to hinge plate and fixed with screws complete |
| 44 | S&F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters complete |
| 45 | S&F factory made solidPVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade.The door frame shall be tied to the wall using 75/100mm long MS screw complete. |
| 46 | S&F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheetto be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete. |
| 47 | Dismantling unsv wooden cabinet/cup board shutter and Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheetcabinet shutter. 18 mm(+0.7mm) thk sheetshutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc all as per Manufacturers\"s speciifcations complete. |
| 48 | S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete. |
| 49 | S&F in repairs tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete |
| 50 | S&F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be as approved complete |
| 51 | S&F in repairs 20mm dia brass chrom plated tubular towel rail complete. |
| 52 | Dismantling wrought iron or mild steel work of any description not otherwise provided for structural steel work incl doors, gates excluding framedtruss etc. |
| 53 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 54 | M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete |
| 55 | M&L for preparing newsteel surface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete. |
| 56 | M&L for preparing oldsteel surface of any description not otherwise described over 10cm width or girth and applying One coat of synthetic enamel paint to match the existing surfaces complete.. |
| 57 | M&L for preparing newwoodensurface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete. |
| 58 | M&L for preparing oldwoodensurface of any description not otherwise described over 10cm width or girth and applying One coat of synthetic enamel paint to match the existing surfaces complete. |
| 59 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete. |
| 60 | S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete. |
| 61 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete |
| 62 | S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete. |
| 63 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete. |
| 64 | S&F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete. |
| 65 | Dismantling cast iron pipes (SWR), jointed in cement mortar for 100 mm bore complete |
| 66 | S&F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete. |
| 67 | S&F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete. |
| 68 | S&F 110mm bore PVC (SWR) bends any radius complete. |
| 69 | Dismantling SWR pipes, jointed in cement mortar for 75 mm bore complete |
| 70 | S&F 75mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete. |
| 71 | S&F 75mm bore PVC (SWR) bends any radius complete. |
| 72 | S&F 75mm bore PVC (SWR) bends any radius with oval access doors complete. |
| 73 | S&F 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent complete. |
| 74 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door complete |
| 75 | S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door complete |
| 76 | S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe complete |
| 77 | S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe complete |
| 78 | S&F 110mm PVC (SWR) vent cowl complete |
| 79 | S&F 75mm PVC (SWR) vent cowl complete |
| 80 | S&F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule complete |
| 81 | S&F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete |
| 82 | S&F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete |
| 83 | S&F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete |
| 84 | S&F in repairs 20mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete |
| 85 | S&F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete |
| 86 | S&F in repairs 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe complete |
| 87 | Dismantling of water storage tank of 500 ltrs to 1000 ltrs capacity complete. |
| 88 | Disconnecting existing tanks of 250 lts to 500 ltrs capacity, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re fixing in position. Cleaning and removing of all scale and dirt etc from tanks and from mouths of circulating pipes etc. including all necessary fittings if required complete |
| 89 | S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete |
| 90 | S&F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut screwed for iron pipe or brass ferrule and fixed complete |
| 91 | S&F in repairs vitreous China squatting pan of Orissa pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including P or S trap etc and provision of lime concrete bedding complete. |
| 92 | S&F in repairs PVC flushing cistern low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve,PVC band 32mm complete. |
| 93 | S&F 110mm PVC (SWR) WC connector with lip ring complete. |
| 94 | S&F 110mm PVC (SWR) WC connector bent type to fit WC outlet complete. |
| 95 | S&F 110mm PVC (SWR) junction single, (Single T, \"Y\" type) equal or unequal complete. |
| 96 | S&F 75mm PVC (SWR) junction single, (Single, \"Y\" type T) equal or unequal complete. |
| 97 | S&F in repair vitreous china Wash hand basin, white, flat back size 550x400 mm except taps, CP waste coupling but incl brackets complete |
| 98 | S&F in repairs CP Centre hole Wash Basin mixer three in One 15 mm bore pipe and similar to Make jaquar Cat part No QQT-7167B complete. |
| 99 | S&F in repairs 32 mm dia stainless steel waste coupling for wash hand basin complete. |
| 100 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete |
| 101 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, 5mm thick mounted on 6mm thick AC building board and around aluminium lipping fixed to wooden plugs with chromium plated brass screws and cup washers complete |
| 102 | S&F in repairs cabinate mirror rectangular shape with selected quality mirror and PTMT frame with opened door shutter with acrylic frame oustside mirror at famed of overall size 400 mm X 500 mm with sheles in side suitabele for Bath room complete |
| 103 | S&F in repairs stainless steel wall mounted plate rack of size 880x880X 220 mm and thickness of sheet not less than 0.50mm with provn for keeping plates and other crockeryfixed with screw and rawal plug etc on wall complete |
| 104 | M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection, chajja, fins, facia, roof bands etc and making good with PCC (1:11/2:3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in anyposition finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement)if required and applying three coat of white wash/two coat of cement base pintto match with the existing surface complete. (Reiforcement will be measured and paid saperately under respective item. |
| 105 | M&L for Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete. (reinforcement shall be measured and paid separately) |
| 106 | M&L for Providing reinforced cement concrete (nominal mix) inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete. Note. (reinforcement shall be measured and paid separately) |
| 107 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 108 | Demolition of existing PCC/lean concrete including floor tiles for sunken treatment of WC/Bath and removing rubbish off the premises. |
| 109 | M&L for 15 mmthick plaster in sunken portion with CM 1:3 mixed with water proofing compound @ 3% by weight of cement plaster surface should be even and smooth without using extra cement complete. Note . (WPC will be measured and paid separately). |
| 110 | M&L for providing & laying APP based polymeric membrance of weight of 3 kg/sqm with non woven polyster fibre as reinforcement over a coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions in sunken portion complete. |
| 111 | M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete. |
| 112 | M&L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) with water proofing compound @3% by weight of cementfor laying floor tiles in sunken portion complete. Note (WPC will be measured and paid separately). |
| 113 | Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) and M&Lforconcealed point wiring with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in & including medium grade PVC conduit 25 mm dia concealed, including cutting chases & making good disturbed surfaces to match with the existing surface of the wall, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit for One light point controlled by one switch 6 Amp one way complete. |
| 114 | All as described as per item No 113 above but for One fan point controlled by one switch 6 Amp one way |
| 115 | All as described as per item No 113 above but for One exhaust fan point controlled by one switch 6 Amp one way |
| 116 | All as described as per item No 113 above but for One bell point controlled by one switch 6 Amp one way |
| 117 | All as described as per item No 113 above but for One 3 pin switch socket combination 6 amp on the independent board. |
| 118 | All as described as per item No 113 above but for One 3 pin switch socket combination on same board with other switches. |
| 119 | All as described as per item No 113 above but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathedFRLS cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board. |
| 120 | All as described as per item No 113 above but for One light point controlled by two 2 way switches, with cables 1.5 sq. mm size |
| 121 | S&F in replacement MCB DB SPN 12 way factory made IP 42 protection class metal double doorwith 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete |
| 122 | S&F in replacement MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete |
| 123 | S&F in repairs MCBs SPN 5 to 40 Amps 240/415Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DB complete. |
| 124 | S&F in repairs MCBs SP 5 to 40 Amps 240/415Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DB complete. |
| 125 | S&F in repairs DX3 RCBOs double pole 240Volt, AC type 30mA ISI marked as per IS-12640-2 integrated label holder, ergonomic design with colour cooled ON / OFF indication dolly with front face indication for earth leakage fault having IP020 protected terminals of size 35 sqmm of 25 Amps capacity and similar to CAT Part No 411326 of Legrand complete |
| 126 | S&F in repairs MCB TPN 4pole 63 Amps240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DB complete. |
| 127 | M&L in repairs switch piano flush type single pole, one way 6amp, 240V complete |
| 128 | M&L in repairs switch piano flush type single pole, two way 6amp, 240V complete |
| 129 | S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. Complete |
| 130 | S&F in repairs ceiling rose 65x17mm three terminals 230/250V, ISI marked . |
| 131 | S&F in repairs lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting along with 09 watt LED Lamp of make : Philips/Bajaj/Wipro |
| 132 | M&L in repairs flush type bell push 6 amp, 240V duly marked for bell complete. |
| 133 | M&L in repairs Electronic ding dong bellAC 230V single pole .make Anchor/ Bajaj |
| 134 | S&F in repairs sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete. |
| 135 | M&L in repairs Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core 4 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 136 | S&F in repairs LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 137 | S&F in repairs LED light fitting 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 138 | S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 139 | S&F in repairs wall security light LED type 25W and similar to Havells, Model ENDURAPEARLSL25WLED757SASYTOPC complete. |
| 140 | M&L in replacement of 25 mm bore light grade GI pipe fixed as bracket, on poles any type, not less than 1.0 m long and bent to shape as required with sutiable clamp made out of 25x4mm Flat Iron dulyfixed 12mm dia nuts, bolts, washers etc. fixed for steel tubular / PCC pole complete. |
| 141 | Supply, fixing, testing & commissioning of Exhaust fan 225 mm sweep, aluminum rust proof body & blades, with louvers for protection from birds,230 Volt AC supply, rated power input not more that 45watt,with louvers fixed outside bldg for auto opening and closing connecting up including provison of cable from ceiling rose to fan, Similar to Crompton Greaves model No Trans Air 9\" Note: Old UNSV fans will be deposited to AGE E/M office through RV |
| 142 | S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV |
| 143 | S&F fans ceiling with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV |
| 144 | S&F in repairs PVCrigidconduit medium grade suitable for telephone wiringconcealed on wall floorceilingetc of size not less than 20 mm including all fitting like bend elbow socket reducers etc complete |
| 145 | S&F in repairs PVC Junction boxes 1-4 waywith cover suitable for PVC rigid conduit of size 20 mm dia complete. |
| 146 | S&F in repairs RJ11 telephone outlet with shutter similar to Schneider cat Part No P4011_DG complete |
| 147 | S&F in repairs TV socket similar to Schneider cat Part No P4500_DG complete |
| 148 | Taking down carefully andrefixing of energy meter any make or capacityetc complete at old/new place after rewiring at site etc. Complete |
| 149 | M&L in replacement Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade)& connected to mainswitchor main control board all as shown in electrical plate No. 03 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. complete. NOTES: - (i) The unit rate includes earthing wire and protection pipe up to 7.5 metre.(ii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends elbow shall be deemed included in the rates. |
| 150 | Excavation in trenches not exc. 1.5 m wide and notexceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes,pierholes etc and getting out in soft/loose soil complete |
| 151 | Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete |
| 152 | Returning filling in excavated approved soil including spreading, leveling, watering and well ramming in layers n.exc 25cm in soil complete |
| 153 | M&L for sandcushoning to cablewith river sandand punning to provide required cover for UGcables complete |
| 154 | M&L brick protection cover to electric cable with sub class \"B\" bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm complete. |
| 155 | Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulatedaluminium conductor servedwithan innersheathing of PVCtape armouredwith galvanised steel wire or tape andoverallPVC sheathed 16sq. mm 4 Core nominal cross section in service connections complete. |
| 156 | M&L for galvanized steel tubing light Grade of 40 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete |
