|
| 1 | Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 2 | Material & labour for providing 10mm thick Plaster of Paris (POP) false ceiling (gypsum anhydrous) to flat or curved surface as per design approved over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions including two coats of oil bound distemper over a coat of primer over a coat of putty complete all as specified and as directed. |
| 3 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and as directed. |
| 4 | All as per item No 3 above butexceeding 1.50 sqm and n exc 4.00 sqm each |
| 5 | Demolition of brickwork or stone /boulder masonry built in cement mortar complete all as specified and as directed. |
| 6 | Material & labour for brickwork with fly ash Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed. |
| 7 | Material & labour for brickwork with fly ash Bricks ,straight or curved in plan to any radius in half brick thick wallin CM(1:6)complete all as specified and as directed |
| 8 | Material & labour RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed. |
| 9 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.fair finished surfaces complete all as specified and as directed. |
| 10 | Material & labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with complete all as specified and as directed. |
| 11 | All as per item No 10 above but 5 mm dia & over upto & incl 10 mm dia in stirrups |
| 12 | Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 13 | Material & labour for rendering 15 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | Material & labour for rendering 15mm thick on fair finish of bricks/concrete/stonesurface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and as directed. |
| 15 | Supply only integral water proofing compound ISI marked complete all as specified and as directed. |
| 16 | Material & labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and as directed. |
| 17 | Material & labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company DepotTinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed.Note :- Shade and pattern of the colour to be approved by GE. |
| 18 | Material & labour for complete removal of existing treatment of wall surfaces and applying 1mm thick wall care putty and making the surface even & smooth by rubbing and applying one coat of alkali resistant primer and applying distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed. |
| 19 | Material & labour for complete removal of existing treatment by washing, rubbing down and stopping of painted surfaces of walls, chajjas, columns, beams etc and finishing with two coats of acrylic smooth exterior paint(100 % acrylic) applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer (acrylic base) applied @ 2.20 kg/ 10 sqm in any pattern by using different tints of any height complete all as specified and as directed. |
| 20 | Supply & fixing pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 21 | Material & labour for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames complete all as specified and as directed. |
| 22 | Supply & fixing of 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 23 | Material & labour for preparation of new wood basesurfaces applying one coats of pink primer andtwocoats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed. |
| 24 | Material & labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 25 | Material & labour for aluminium framed doors/windows/ventilators/partions of any sections any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for glazing/gauzing including necessary jointed cleats, etc complete all as specified and as directed.Note-: Glazing/gauzing shall be measured and paid separatly. |
| 26 | Supply & fixing double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 27 | Supply & fixing mild steel 4 levers mortice lock, vertical type, size 100 mm complete all as specified and as directed. |
| 28 | Supply & fixing door closer hydraulically regulated, designation No 3,aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one complete all as specified and as directed. |
| 29 | Supply & fixing 12mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work with all necessary fittings like top and bottom brackets, two numbers of stainless steel handle as appropriate size for door, locking arrangement including cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) complete all as specified and as directed. |
| 30 | Supply & fixing sheet glass, ordinary quality in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to aluminium section complete all as specified and as directed. |
| 31 | All as per item No 30 above but 4 mm thick fixed to aluminium section complete all as specified and as directed. |
| 32 | Supply & fixing 9 mm thick prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or with beading with metal framework etc complete all as specified and as directed. |
| 33 | Supply & fixing butt hinges, extruded aluminium alloy with galvanised mild steel hinge pig, anodised and fixed, type B-22, size 100 mm etc complete all as specified and as directed. |
| 34 | Supply & fixing 150 mm long aluminium anodised handles, cast type complete all as specified and as directed. |
| 35 | Supply & fixing for 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 36 | Supply & fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed. |
| 37 | Supply & fixing harrison rail mild steel chromium plated of 25mm dia for curtain rod fixed with two Nos of brackets, stops for each rail complete all as specified and as directed. |
| 38 | Dismantling of stone stabs & tiles of any description or thickness in floor, aprons etc and bedded & pointed in cement mortar and disposing off debris to a distance up to 250M complete all as specified and as directed. |
| 39 | Material & labour hard core of broken stone or boulders of gauge n exc 63 mm depossted, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 40 | Material & labour for 100 thick cement concrete type D2, 1:4:8 (40 mm graded aggr) as in sub base complete all as specified and as directed. |
| 41 | Material & labour for marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of makrana white or any shade as per existing floor etc complete all as specified and as directed. |
| 42 | Material & labourfor granite(of any type) work (table rubbed and polished) 18 to 20 mm thickin steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and as directed. |
| 43 | Material & labour for grinding and polishing of existing floor of stone slab like marble, granite, kota etc by using mechanical grinder/floor polish machine and finally cleaning and treating the surface with beeswax polish etc complete all as specified and as directed. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 45 | Supply & fixing light shade vitrified tiles 8-9 mm thick (square/ rectangular) polished area of each tiles n.exc 0.36 sqm in floors, parking etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade incl 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 46 | Supply & fixing light shade vitrified tiles 8-9 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm on vertical surfaces such as skirting, dado, risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl 10 mm thick rendering in cm (1:4) as in back coat complete all as specified and as directed. |
| 47 | Material & labour for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes, including packing under and completely surrounding pipes with concrete after they are laid and tested for 200 mm boreRCC pipe complete all as specified and as directed. |
| 48 | Material & labour for reinforced cement concrete pipes class NP - 2, laid in trenches & jointed complete with collars, bore of pipe 200 mm complete all as specified and as directed. |
| 49 | Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and as directed. |
| 50 | Material & labour forpolished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 51 | Material & labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 52 | Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semicorrugated, etc.) sheet in roof covering complete all as specified and as directed. |
| 53 | Supply & fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed. |
| 54 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 55 | Supply & fixing of steel work in tubular trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed. |
| 56 | Excavation in trenches n.exc 1.50M wide & n.exc 1.50M deep for foundation etc or for shafts wells cesspits ,manhole pier holes etc n exc 10 sqm on plan and n exc 1.5 m depth and getting in hard/dense soil complete all as specified and as directed. |
| 57 | Material & labour for cement concrete( 1:4:8) type D2 (40mm graded) in foundation filling and mass concreting complete all as specified and as directed. |
| 58 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm for any types of soil complete all as specified and as directed. |
| 59 | Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 60 | Supply & fixing vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and as directed. |
| 61 | Supply & fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 62 | Supply & fixing vitreous china urinals, flat back, bowl type of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and as directed. |
| 63 | Supply & fixing 75 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed. |
| 64 | Supply & fixing of PVC (SWR) bends any radius of 75 mm bore pipes complete all as specified and as directed. |
| 65 | Material & labour PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement including all necessary concrete work and connecting jobs for making good the area complete all as specified and as directed. |
| 66 | Supply & fixing chromium plated bottle trap, 32 mm dia fancy type complete all as specified and as directed. |
| 67 | Material & labournon-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 complete all as specified and as directed. |
| 68 | Material & labour glazed ceramic coloured tiles of approved quality ISI marked (450 X 350X7 mm / 450 x 300 x 7 mm / 350 x 250 x 7 mmthick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface complete all as specified and as directed. |
| 69 | Supply & fixing 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sq cm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 70 | Supply & fixing chromium plated fancy type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed. |
| 71 | Supply & fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as specified and as directed. |
| 72 | Supply & fixing 15mm bore pillar taps, fancy type (long body), (Weight not less than 622 gms), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified. |
| 73 | Supply & fixing of 600 mm X 450 mm size looking mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 74 | Supply & fixing 500 ltr capacity rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoilsted and fixed in positioncomplete all as specified and as directed. |
| 75 | Supply & fixed 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 76 | Supply & fixed 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipal fixed complete all as specified and as directed. |
| 77 | Supply & fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed. |
| 78 | All as per item No 77 above but bore of pipe 20 mm |
| 79 | E/M Portion |
| 80 | Supply andinstallation invertor based split AC of capacity 2.0 TON (Copper coil) electric driven single phase, 230 volts, 5 star rating including all accessories like brackets, rubber tubing, copper tubing, gas charging, with auto filter clean technilogy etc including testing and commissionin as per norms of BEE and alongwith digital type voltage stabilizer automatic operation single phase, designed for input variation between 130 V to 300 Volt with output voltage stabilized at 230 Volts sutaible for split AC of 2.0 TON and making good to the disturbed surface to match the existing surface complete all as specified and as directed.Make : Hitachi/LG/Blue star/Godrej/\"O\" General/VoltasNote :- (i) All cooing /condensing coil shall be made of copper material.(ii) Copper tubing including insulation required if extra is included in the quoted rate. No extra payment shall be made for extra piping.(iii) All necessary cutting of POP/ ceiling/wallif required is deemed to be included in the quoted rate. No extra payment shall be made on this acount. |
| 81 | Material & labour for sub main wiring (concealed/surface) complete with two single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and as directed.Make: Note: 3 run of 10 sqmm& one run of PVC conduit shall be measuredas single unit. |
| 82 | Material & labour for sub main wiring (concealed/surface) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and as directed.Note: 3 run of 4 sqmm & one run of PVC conduit shall be measuredas single unit. |
| 83 | Supply and fix power unit for AC upto 2 ton, 4 module, 240 volts complete all as specified and as directed.Make: Legrand cat No 675558 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 84 | Supply and fix power plug top suitable for AC of2.0 Ton completer complete all as specified and as directed. |
| 85 | Supply and fix PVC rigid conduit pipe 20/25 mm dia including all accessories and necessary saddles with fixing screwa, gutties etc.for drain out water complete all as specified and as directed. |
| 86 | Supply and fixsplit AC stand of outdoor unit suitable for 1.5/2 ton including necessary fixing arrangement complete all as specified and as directed. |
| 87 | Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified and as directed. |
| 88 | Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing complete all as specified and as directed. |
| 89 | Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed. |
| 90 | Material & labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in wallsby cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer coverof suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.(a) One light point controlled by one switch |
| 91 | (b) One fan point controlled by one switch |
| 92 | (c) One exhaust fan point controlled by one switch. |
| 93 | (d) One bell/ buzzer point controlled by one push switch. |
| 94 | (e) One switch socket outlet modular type 3 pin 6 amp on same board. |
| 95 | All as per item No 89 above but 1.5 sq mm cable sizeand 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board complete all as specified and as directed. |
| 96 | All as per item No 89 above but 2.5 sq mm cable sizewith 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and as directed. |
| 97 | Note for Item No. 89 to 95:-The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces.(ii) The quoted rate shall demmed to be included cost for point wiring andmaking good. |
| 98 | Supply & fixing Decorative LED down light 36 watt recessed mounting type full lit luminaire with glare free uniform illumination with longer life and less maintenance, 2x2 Ft (>100 lm/W) complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make : CG Cat Part No. LCTLRNE-36-FO-CDL or equivalent in Wipro/Philips. |
| 99 | Supply & fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V complete all as specified and as directed.Make : CG Cat Part No. LSTS-25-CDL or equivalent in Wipro/Philips.Note :(i)The quoted rate shall demmed to be included cost for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement. |
| 100 | Taking down old u/s and Supply & Fix new master led tube 4ft20 W LED batten of high-quality Materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structurehaving nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed.Make :CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro. |
| 101 | Supply & fixing 0-4 step, one module,modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, complete all as specified and as directed.Make : Legrand Cat No. 675531or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 102 | Supply & fixingbell push switch, modular type, 6 Amps, 1 module, 230 volts complete all as specified and as directed.Make : legrand Cat No. 675504 |
| 103 | Supply & fixingSwitch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, complete all as specified and as directed.Make : Legrand Cat No. 675501 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 104 | Supply & fixing socket modular type6 Amps 3 pin 2 module230 volts complete all as specified and as directed.Make : Legrand Cat No. 675551 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 105 | Supply & fixingfor ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals complete all as specified and as directed. |
| 106 | Supply & fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts complete all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 107 | Supply & fixing switch modular type 16 Amps,one way with indicator, 1 module,230 volts complete all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 108 | Supply & fixingsheet metal enclosures for SPN DB\"s with metal double door for incorporating MCBs,IP-43 , 12 way, 240 volts, as per IS-8623 complete all as specified and as directed.Make : Legrand Cat No 507612 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 109 | Supply & fixingMCB SPN, 40-63Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.Make : Legrand Cat No. 408617 or equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 110 | Supply & fixing MCB SP 6-32Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.Make : Legrandor equivalent in Havells/ Anchor Panasonic (Roma plus) |
| 111 | Supply & fixing new exhaust fan PVC body 10\" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed. |
| 112 | Taking down fan of any size and any make, sealing cable end, dismantling the fan blade and removing fan and blade to store complete all as specified and as directed. |
| 113 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. |
| 114 | Supply & fixing Energy saving ceiling fan 1200 mm sweep min air delivery 210 CFMwith double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire ofsize 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. |
| 115 | Supply & fixingsheet metal enclosures for DB\"s for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old Old u/s TPN DB,complete all as specified and as directed.Make : Legrand Cat No 507670 or equivalent in Havells/Seimens/ L & T/ Luker |
| 116 | Supply & fixing MCB TPN, 40-100 Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.Make : Legrand Cat No. 408683 or equivalent in Havells/Seimens/ L & T/ Luker |
| 117 | Supply & fixing MCB SP 40-63 Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed.Make : Legrand or equivalent in Havells/Seimens/ L & T |
| 118 | Material & labour for earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 4 of SSR PART 1 of 2009 to the earthing test point all as specified and as directed.Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate for earthing complete all as specified and as directed. |
| 119 | Material & labour for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade withstranded aluminum conductor of size 50 sqmm3.5 Core all as per IS , complete all as specified and as directed. |
| 120 | Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation,laying of cable or pipe ( where provided for protection of cable or fixing with poles and stays) and getting out in any type of soilincluding trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. |
| 121 | Boring of hole under road/pavement/hard standing or any other situation by mannual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends complete all as specified and as directed. |
| 122 | Material & labour for High density polyethylene pipes (HDPE) DWC duct pipe of size 63 mm dia laid in trenches for passing of LT cable complete all as specified and as directed. |
