|
| 1 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar, including all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 2 | Demolition ofPlain cement concrete in staircase, landing and similarwork and removing debris to a distanceexc 500m but not exc 1000m all as specified & directed. |
| 3 | Demolition of Reinforced cement concrete of any description and in any position not otherwise speifically provided for all as specified & directed. |
| 4 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing,and rubbish off the permises all as specified and directed. |
| 5 | Taking up or down GI tubing 20 mm diabore from trenches/wall including all fittingscomplete all as specified and directed. |
| 6 | Dismantling & taking down of water tanks exc 500butnot exc 1000 litres capacity complete all as specified and directed. |
| 7 | Taking down cement plaster on wallsof brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. |
| 8 | Taking down chowkhats or frames with shutters area not exc. 1.5 sq. m each (without taking off shutters from the frames) including making good to match with adjoining surfaces complete all as specified and as directed. |
| 9 | Taking down chowkhats or frames with shutters area exceeding 1.5 Sq.m and not exc. 4 Sq. m Each (without taking off shutters from the frames) including making good to match with adjoining surfaces complete all as specified and as directed. |
| 10 | M&L for PCC (1:4:8)type D2 using 40mm graded stone aggregate as in foundations, filling and mass concretecomplete all as specified and directed. |
| 11 | M&L for PCC(1:3:6) type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed. |
| 12 | M & L for rendering 10 mm thick cement mortar (1:6) on brick or concrete surfacesfinished even and smooth without using extra cement etc complete all as specified and directed. |
| 13 | M & L forwater proofing treatment over RCC roof slab all as per following specification complete all as specified and directed:-(i)Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth (ii) Applying compatible primer/bonding bitumen @ 0.40 Litre/Sq m (iii) Applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.60kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished overand torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer\"s instructions (iv) Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m |
| 14 | Material and labour for Pre-cast cement concrete(1:3:6) type C-1 using 20 mm graded stone aggregate as in solid block masonry exc. 10 cm in width and setting in cement mortar (1:6)complete all as specified and directed. |
| 15 | M & L for rendering 5mm thick cement mortar (1:3) on ceiling concrete surfacesfinished even and smooth without using extra cementcomplete all as specified and directed. |
| 16 | M & L for Rendering 10 mm thick cement mortar (1:6) on other than fair face of brick work or concrete surfaces finishedeven & smooth without using extra cement complete all as specified and directed. |
| 17 | M & L for Rendering 15mm thick cement mortar(1:4) on fair face of brick work or concrete surfacesfinishedeven and smoothwithout using extra cement including mixing water proofing compoundcomplete all as specified and directed.(Note : WPC will be measured & paid seperately) |
| 18 | M&L for PCC(1:3:6) type C2 using 40 mm graded stone aggregate as in75 mm thick plinth protectionfinished even and smooth without using extra cement includingJoints filled with sealing compound grade Acomplete all as specified and directed. |
| 19 | Material and labour forscreed bed or bedding layer 20mm thick cement mortar (1:4) for laying of tilescomplete all as specified and directed. |
| 20 | Material and labour for Chequered cement concrete tiles of size 30cmx30cmx25mm thick, set, jointed and pointed with white cement and pigment in floorscomplete all as specified and directed. |
| 21 | M & L for sand filling in pathway in layers,including watering and consolidation, machine compaction complete all as specified and directed. |
| 22 | Supply & Fix machine pressed Pre-cast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and no pigment, colouredlaid over machine compacted sand cushion all as specified and directed. (Note : Sand cushion will be measured & paid seperately) |
| 23 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.all as specified and directed. |
| 24 | M&L for pre cast cement concrete (1:2:4) type B1 using 20mm graded stone aggregateas in cover slab and set in CM (1:6)with top surface finished even & fair complete all as specified & directed |
| 25 | Material and Labour for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally or hoping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed |
| 26 | Supply only integral water proofing compound, ISI marked complete all as specified & directed |
| 27 | S&F Powder coated(minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and as directed. |
| 28 | S & FFigured glass 4mm thick, pin head type and area n.exc 0.5 sq. m in squareseach pane fixed to alluminium frame works with necessary rubber beadings etc. complete all as specified and as directed |
| 29 | S&FGalvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples to aluminium frames/shutters, complete and as directed. |
| 30 | S&F in repairs Vitreous China White colouredSquatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral footrests, ‘P’ or ‘S’ Trap, providing Joints between flush pipe and Socket of WC Pancomplete all as specified and as directed. |
| 31 | Supply and fix in repairs vitreous china wash down water closet pan (Pedestal pattern) white,including connection to drain & or out going pipeand to flushing pipe, anti syphonage pipe, complete all as specified and as directed. |
| 32 | Supply and fix plastic water closet seat cover any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixing in repairs complete all as specified and as directed. |
| 33 | S & F in repairsPVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalvefloat and handle including brackets and includingflush pipe of polyethylenePVC 32 mm for low level cistern etc complete all as specified and directed. |
| 34 | S&F inrepairsPVC Connection 15mm dia 600mm longwith PTMT nuts complete all as specified and as directed. |
| 35 | Supply and Fixing in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 36 | Supply and fix in repairsbevelled edged mirror of size 600 mm x 450 mm of selected quality glass 5mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 37 | Supply and fix vitreous China wash basin, white, flat back, size 630 x 450mm includingwaste fittingsbrassCromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed andbrackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specifiedand directed. |
| 38 | S&FWaste coupling of PTMT (half or full threaded) 32mm dia all as specifiedand directed (minimum weight 32mm-45gms) complete all as specified and directed. |
| 39 | S&F in repairPillar taps, fancy type cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or cold with long screwed shanks and fly nuts, screwed foriron pipe 15mm dia boreand fixed complete all as specified and directed. |
| 40 | S&F in repairsBib tap two way, cast copper alloy chromium platedwith fancy type screwed down screwed for iron pipe 15mm dia or brass ferule etc complete all as specified and as directed. |
| 41 | S & Fin repairs Bip tapschromium plated cast copper alloy with crutch or capstan head, screw down for iron pipe 15mm dia or for brass ferrule all as specified and directed. |
| 42 | S & Fin repairs Stop valvescast copper alloys, screwed down, high pressure, with capstan head, screwed both ends for iron pipe 15mm diaor unions all as specified and directed. |
| 43 | M & L for PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet all as specified and directed. |
| 44 | S&F in repairsToilet paper holder of brasschromium plated, fixed to wallscompleteall as specified and as directed |
| 45 | S&F in repairs Vitreous china Urinal, half stall type, size 580x380 x 350 mm minimum, white completeall as specified and as directed |
| 46 | S&F urinal spreader of PTMT (Minimum weight 60gms) any colour for fixing with 15mm dia pipe for half stall urinals completeall as specified and as directed |
| 47 | S&F in repairTowel rail 600 mm long between flanges,D type 20 mm dia brass CP complete all as specified and directed. |
| 48 | S&FAluminium alloy, anodised, sliding door bolt with hasp,300mm long,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs all as specified and as directed. |
| 49 | S&F in repairs Soap dish, chromium plated brassfixed on wall as per manufacturers instruction all as specified and as directed. (Note : Prayag cat No BA-45 or equivlaent makeas specified in P S herein after) |
| 50 | S&F PVC (SWR) pipes 110 mm diasingle socketed in any length with rubber ring joints fixed on walls all as specified and as directed. |
| 51 | S&F PVC (SWR) bends of 110 mm diaall as specified and as directed. |
| 52 | Supply and fix PVC (SWR) bends 110 mm dia withaccess door all as specified and as directed. |
| 53 | Supply and fix PVC (SWR) bends 75 mm bore of any radius all as specified and as directed. |
| 54 | S & F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm bore all as specified and as directed. |
| 55 | S & F PVC (SWR) branch piece, single (single Y) equal or unequal of 75 mm bore all as specified and as directed. |
| 56 | Supply and fix PVC (SWR)junction single, (Single T) equal or unequal with door of size 110 mm all as specified and as directed. |
| 57 | Supply and fix PVC (SWR)junction single, (Single T) equal or unequal with door of size 75 mm all as specified and as directed. |
| 58 | S&F CPVC pipes 20mm outer diaSDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling all as specified and as directed. |
| 59 | M & L forNon skid ceramic coloured tiles 7 to 8mm thick square/ rectangular, size of tile 300 x 300 mm or above, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 60 | M & L for screed bed for bedding layer 15 mm thick cement mortar(1:6).for laying floor finishes all as specified and as directed. |
| 61 | Material and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to match as in dados/skirting all as specified and as directed. |
| 62 | S&F Rotational moulded polythylene water storage tanks 1000 ltrs capacity, triple layered,(cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 63 | S & FSolid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification etc complete all as specified and directed |
| 64 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on backface etc including necessary fittings like Hinges , tower bolts, handles complete all as specified and as directed. |
| 65 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed |
| 66 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed |
| 67 | Removing excavated soil to a distance not exc. 50 m and depositing where directed at a level notexc. 1.5 m above the starting pointetc complete all as specified and as directed |
| 68 | M&L for Reinforced cement concreteDesign Mix(M-25)using 20 mm graded stone aggregates as in foundation, including rafts, footings, plinth beam etc complete all as specified and as directed |
| 69 | M&L for Reinforced cement concrete Design Mix(M-25) using 20 mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all asspecified and as directed |
| 70 | M&L for Reinforced cement concrete Design Mix(M-25) using 20 mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed |
| 71 | M&L for providing reinforced cement concrete Design Mix(M-25) using 20 mm graded stone aggregates as in column, pillars, piers, posts and struts etc complete all as specified and as directed |
| 72 | M&L for Providing pre-cast cement concrete(1:3:6) type C-1using 20 mm graded stone aggregate as insolid block masonary, not exc 10cm thick setting in cement mortar 1:4, complete all as specified and as directed |
| 73 | M&L for Cutting chases, pinning in Stone, concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth etc complete all as specified and as directed |
| 74 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticalwith fair finished flat surfaces of concrete etc complete all as specified and as directed |
| 75 | M&L forFormwork to sides of pillars,posts, struts, piers,columnsand stanchionswith fair finished square or rectangular surfaces of concrete complete all as specified and as directed |
| 76 | M&L for Formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with fair finished flat surfaces of concrete etc complete all as specified and as directed |
| 77 | M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with fair finished flat surfaces etc complete all as specified and as directed |
| 78 | S&F Factory madepressed steel frame of profile size 125 X 60 mm for door, made of 1.25 mm thick M S sheetwith one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 79 | M&L for Plain cement concrete(1:3:6) type C-0using 12.5mm graded stoneaggregateas in hold fast and fillingof pressed steel chowkatetc including necessary formwork complete all as specified and as directed |
| 80 | M&L for Mild Steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed |
| 81 | S&FFlush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 82 | M&L for Preparation of new wood surfaces of any descriptionover 10 cm in width or girth,not otherwise described and painting with two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 83 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded as specified and directed.NOTE :Sheet glass/figured glass and wire mesh will be measured and paid separately. |
| 84 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed (NOTE: Glass and wire mesh will be measured and paid separately). |
| 85 | S&F Sheet glass4mm thickofordinary quality and glazing with oil putty or wooden beading to wooden frame or steel framein squares not exc 0.50 sqm in each pane complete all as specified and as directed |
| 86 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 87 | S&FAluminium handle150 mm long, cast type, anodised etc complete all as specified and as directed |
| 88 | S&F Aluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed |
| 89 | S & F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm all as specified and as directed. |
| 90 | S&Fbutthinges 100mm size, heavy weight, Stainless Steel and fixed complete as sepecified and directed |
| 91 | Material and Labour for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc cut to length bent to shape required including cranking bending spirally or hoping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed |
| 92 | M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregatesasin 75 mm thicksub base toflooing etc complete all as specified and as directed |
| 93 | M& L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over &including 15 mm thick screed bed in cement mortar (1:6)complete all as specified and as directed |
| 94 | M& L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over &including 15 mm thick screed bed in cement mortar (1:6)complete all as specified and as directed |
| 95 | M&L for Glazed ceramic coloured tiles of size 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to matchover &includingbacking coat 10 mm thick in cement mortar (1:3) complete all as specified and as directed |
| 96 | Supply only Liquid water proofing compound, ISI marked, complete all as specified and as directed |
| 97 | M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed |
| 98 | M&L for Preparing new plastered suface of walls and applying two coatsDistemper Acrylic emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 99 | M&L for preparation of newsurface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 100 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 101 | S&FCPVC pipes 25 mm dia bore, SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 102 | S & FBall valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25 mm dia bore complete all as specified and as directed [Minimum weight for 25 mm – 455 gms] . |
| 103 | S & FGun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe 25 mm dia boreetc complete all as specifieid and as directed |
| 104 | S&F bib tap long body fancy type cast copper alloy chromium plated with capstan headscrewed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 105 | S&F Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed |
| 106 | S&F stop valves /Angle Stop cock fancy typechromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsfixed for 15 mm dia bore pipe complete all as specified and as directed |
| 107 | S & F Towel rail rail, 20mm dia, D type, 60cm long between flanges of brass or chromium plated complete all as specified and as directed. |
| 108 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 109 | S & F PVC connection 15 mmdia 450mm longwith PTMT nutsall as specified and as directed. |
| 110 | S&F Bevelled edge mirror of selected quality of size area exc 0.40 Sqm but ot exc 0.60 sqmmounted on 6 mm thick AC building board of or 6 mm thick with 40mm thick acryic beading etc complete all as specified and as directed |
| 111 | S&Fvitreous china squatting pan ORISSA pattern of size 580X440 mm white with integral foot rest \"P\" trap including connecting to trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed |
| 112 | S&F vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 113 | S&F PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all asspecifiedand as directed |
| 114 | S&F Vitreous China wash basin, white, flat back / oval shaped size 550x440mm, including brackets, PVC waste pipe 610 mm long andPVC connection 450 mm long complete all as specified and as directed |
| 115 | S&FVitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe 40 mm bore, waste stainless steel couplingand LDPE pipe 600 mm long complete all as specified and as directed |
| 116 | M&L forGranite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed |
| 117 | M&L for Screed bed/rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete roof surfacemixed with water proofing compound finished even & smooth etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 118 | S&F PVC (SWR) gully trap 125/110 mm dia, setting and jointing with solvent cement complete all as specified and directed. |
| 119 | S&FPVC (SWR) pipes 110mm dia , single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed |
| 120 | S&FPVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed |
| 121 | S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joint fixed to wallcomplete all as specified and directed |
| 122 | S&F PVC (SWR) bends (any radius) with access door of 75mm dia. |
| 123 | S&F PVC (SWR) vent cowls of 110mm diacomplete all as specified and directed |
| 124 | S&F PVC (SWR) vent cowls of 75 mm diacomplete all as specified and directed |
| 125 | Filling under floors Spreading and levelling in well layers not exc 25 cm thick including watering, well ramming etccomplete all as specified and as directed |
| 126 | M&L for Hardcore with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed |
| 127 | Surface excavation not exceeding30 cm deep and averaging 15cm deep and getting out in hard / dense soil etc complete all as specified and as directed |
| 128 | M&L for Plain cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) asin 100mm thicksub base to flooing etc complete all as specified and as directed |
| 129 | M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregateas in coping,kneelers, apex stone etc complete all as specified & directed |
| 130 | M&L forPre-cast Cement concrete(1:3:6)Type C-1 using 20 mm graded stone aggregates as insolid block masonary exc 10 cm in width and setting in cement mortar (1:4)all as specified and directed. |
| 131 | M&L for PCC (1:2:4) type B-0using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 132 | M & L for Rendering 10 mm thick cement mortar (1:4) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 133 | M&L for Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in bed to drain pipes 150mm diaincluding packing under and haunching againstthe sides of pipe after they are laid & testedcomplete all as specified and directed. |
| 134 | M&L for DWCPE sewage pipe line 150mm dia, class SN-8 including sealing joints etc complete with collars complete all as specified and directed. |
| 135 | M&L for cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and foring branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished, and re-forming benching as required etc complete all as specified and as directed |
| 136 | Material and labour for point wiring with 1.5 Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100Volts grade conforming to IS - 694 drawn through and includingnon metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/floor and fixed on ceiling/ roof/ truss/ columns etc, including provision of factory made branded galvanized steel pressed terminal box (modular metal flush box) 1.0mm thick and suitable size modular cover plates and frames for housing the modular switches,etc., complete concealed in walls and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc, complete all as specified and as directed for following :- |
| 137 | One light point controlled by one switch |
| 138 | One fan/exhaust poin controlled by one switch / regulator |
| 139 | One 3 pin socket out let 5 A on same board |
| 140 | One 3 pin socket out let 5 A on independent board |
| 141 | Note for Item No. 140 :-(i) The earth wire for the points in the same circuit can be looped from point to point(ii) Earth wire shall be taken inside the conduit(iii)Quoted rate is deemed to be included cost of terminal box(iv) Quoted rate is deemed to be includedany length of cablefrom DB to any switch/ socket board to be included in point wiring. |
| 142 | S&F LED batten with luminaire suitable for indoor applications 20 Watts capacity, 4 feet long with extruded aluminiumhousing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. |
| 143 | S&F LED batten with luminaire suitable for indoor applications 10 Watts capacity, 2 feet long with polycarbonate housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. |
| 144 | Supply and fixModular switch 1 way 6Amps,1 moduleall as specified and directed. |
| 145 | Supply and fix Modular Socket, 6Amps - 2/3 pin combined 2 moduleall as specified and directed. |
| 146 | S&F in repairs MCB SPN 240 volts 40 Amps, C curvescomplete all as specified and as directed |
| 147 | S&F in repairs MCB single pole 240 volts 6 to 32 Amps, C curvescomplete all as specified and as directed |
| 148 | S&F in repairs MCB Distribution boardSPN 4 way, double door type 240 volts with 200 Amps rated busbaras specified and as directed. |
| 149 | S & F in repairs sub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run through & including suitable size of PVC casing capingall as specified and as directed.(Note Three run of 6sqmm cableand one run of casing & caping altogether measured as one unit) |
| 150 | S&Fceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed |
| 151 | M&L for earthingwith galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I and as specified or indicated and testing on completion includingearth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways, funnel with watering pipe wire mesh and lugs,test point,including dismantaling old earthing complete all as specified and as directed |
| 152 | S&F in repairs LED bldg securitylight fitting 30Watts capacity with pressure die cast housing along with prismatic polycarbonate difuser with IP 66protection complete all as specified and as directed |
| 153 | S&F in replacementBracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and includingapplying two coats of aluminum paintover a coat of red oxide primer complete all as specified and directed. |
| 154 | S&F Exhaust Fan200mm Sweep, steel body, AC single phase, 230Volts with blade and frame and louver,connecting up wit flexible 3 core copper conductor 0.5sqmm complete all as specified and directed. |
| 155 | S&F Exhaust Fan300mm Sweep, steel body, AC single phase, 230Volts with blade and frame and louver,connecting up wit flexible 3 core copper conductor 0.5sqmm complete all as specified and directed. |
| 156 | S&F sheet metal enclosure SPN distribution board 2 way without bus bar complete all as specified and directed |
| 157 | S&F MCB single pole 240 volts 5 Amps, 10Ka, C curvescomplete all as specified and as directed |
| 158 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed |
| 159 | S & F Switch piano, flush button, 5 Amps single pole one way complete all as specified and as directed |
| 160 | Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of water supply pipe line/cable etc complete all as specified and as directed. |
| 161 | S&F in repairs G I tubing medium grade 40 mm dia bore with all fitting laid in trenches/walls/Roads for cable protection complete all as specified and as directed |
| 162 | S&F in repairs GI tubing medium grade 25 mm bore with all fitting laid in trenches/walls/Roads for cable protection complete all as specified and as directed |
| 163 | S&F in repairs GI tubing medium grade 20 mm bore with all fitting laid in trenches/walls/Roads for cable protection complete all as specified and as directed |
| 164 | S&F in repairs Gun metal Gate valve of size 20 mm dia with iron wheel head, screwed both ends for iron pipe 20mm dia and fixedall as specified and as directed |
| 165 | S&F in repairs Gun metal Gate valve of size 20 mm dia with iron wheel head, screwed both ends for iron pipe 25mm dia and fixedall as specified and as directed |
| 166 | S&F in repairs Float valveBall brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20 mm dia or brass ferrule and fixed all as specified and as directed |
| 167 | M & L for taking branch connection from existing distribution G I pipe 25mm dia including cutting, threading inserting G I fitting to take branch connection of 25/20mm dia all as directed |
| 168 | M&L for Sand cushniningfor protection of cables all as per Para 19.75 of SSR part-I complete all as specified and as directed. Note :Punned thick sandwill be measured for payment |
| 169 | Supply and lay well burnt sub class B old size bricks asprotection to underground cables layingall as per Para 19.75 of SSR part-I complete all as specified and as directed. |
| 170 | Supply, laying & testing L TXLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 voltsgrade fo size 2 core 10 Sqmm complete all as specified and as directed. |
| 171 | Supply and laying Galvanised iron, lightgrade pipes 40 mm dia including fittings laidin trenches complete all as specified & directed. |
